Powerline Adapters

The Cisco Aironet Power Injector (AIR-PWRINJ5) increases wireless LAN deployment flexibility of Cisco Aironet Access Points by providing an alternative powering option to local power inline power-capable multiport switches and multiport power patch panels.

The single-port Cisco Aironet Power Injector provides 802.3af power and data signal sending both to the Cisco Aironet Access Point.

The power injectors provide up to 15.4 W over the unused wire pairs of a Category 5 or better Ethernet cable supplying enough power for a distance of 328 ft. (100 m) on the Cisco Aironet 1040 1140 1260 2600 and 3500 Series Access Points. While it can also support the Cisco Aironet Series 3600 Access Points …

Axis 5026-203 PoE adapter Gigabit Ethernet

Single port PoE midspan, IEEE 802.3af (15W). The midspan can be installed on a wall, shelf or DIN rail with an accessory DIN clip.

Digitus 4 Port Gigabit 4PPoE Extender, 802.3at, 60 W

Digitus 2 Port Gigabit 4PPoE Extender, 802.3at, 60 W

LevelOne 1-Port RJ-45 Gigabit PoE Repeater

Digitus 10 Gigabit Ethernet PoE+ Injector, 802.3at, 30 W

AXIS TU8001 Ethernet Surge Protector helps reduce downtime service and maintenance of your system by shielding your PoE devices against transient voltage spikes in the Ethernet cable. It is a compact high-quality product validated to work seamlessly with Axis devices.N/AN/AAXIS TU8001 is perfect to be installed close to a PoE switch located indoors or in an outdoor electrical enclosure cabinet adjacent to a network camera or another device. Placing it in an enclosure you get less exposed wiring simpler troubleshooting of the whole system and less hardware visible on the pole. The product can be easily mounted on a wall or on a DIN rail.N/AN/AWith a network device and a surge protector from Axis …

- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment costs by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points IP cameras and IP phones
- Lightweight compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections

D-Links DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE) even when other devices in the network do not support it. With PoE technology low voltage DC power and Ethernet data signals are combined on …

Connect two LC fiber cables or establish fiber connectivity on a keystone patch panelConnect two LC Duplex fiber cables featuring UPC polished ends to extend a network connection using this LC to LC Keystone Coupler. The female to female fiber coupler maintains optimal signal integrity while achieving low insertion loss that exceeds industry standards.Compatible with Single Mode and Multimode Fiber CablesThe LC Fiber Coupler supports Single Mode and Multimode LC/LC fiber cables. It is compatible with OS1/OS2 (9/125m) and OM1/OM2/OM3/OM4/OM5 (62.5/125m and 50/125m) fiber core/cladding. The coupler fits securely into the keystone jack which can be installed in a keystone patch panel or wall plate …

This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.).The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.Convenience and cost savings:- This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), …