Engine oil 1 L AGT AGT3 GX270 SF (PFAGT3GX2727SF)  all engine oils →

Adapted viscosity temperature patterns ensures the optimum supply of oil to the system Excellent oxidation and aging stability Outstanding prevention of corrosion as well as wear and tear Optimised air separation capabilities and foaming patterns guarantees the dependable operation of the hydraulics system even under the toughest operating conditions Excellent non-ferrous heavy metal and electronic control circuit component compatibility

Ensures a high-strength oil film and high pressure resistance for extreme racing use Particularly suitable for 2-stroke engines with premix or intake pipe injection systems used for extreme racing Mixing Ratio: 2-4% Contents: 1000 ml

canisters

SAE 5W-30. API SP. ACEA C3. MB-Approval 229.51. MB-Approval 229.52. vw 504.00, 507.00. BMW LL-04. C30. FCA 955535-S3 Perf. Advanced Synthetic Technology CoolTech. Controls excessive engine-damaging heat.

Motul Specific Dexos 2 is a high performance, fully synthetic, fuel economy engine Oil exclusively designed for GMengines requiring a lubricant approved dexos2.

Kinematic viscosity at 100 °C: 14.52 mm2/s. Film viscosity at 40 ° C: 91.4 mm2/s. Visko

This product is a moderate detergent monograde mineral engine oil specifically engineered for classic cars and is also suitable in vintage cars incorporating a modern filtration system. Formulated with ZDDP (zinc/phosphorus).

- reduces vibrations and Motorengeräusche - Excellent Oxidationsstabilität - Special Active Reinigungstechnologie High Scherstabilität - Low viscosity, fast Durchölung

5W-30 synthetic low-friction engine oil with revitalizant Contains engine oil additive against wear and reconditioning The product is suitable for cars and smaller trucks / vans Xado 5W-30 engine oil was developed for engines of the latest generation Maintains constant, high operating characteristics at extended oil change intervals

Xado 10W-60 engine oil has been specially developed for high-performance engines of sports and racing cars Suitable for use in extreme operating conditions: intensive acceleration dynamics, maximum performance, high speed, overheating Lubricates safely and prevents dry friction of the engine components in case of overloads Due to the maximum possible viscosity for engine oils (SAE 10W-60), it allows a reliable high temperature seal of the cylinder piston group and minimal oil loss due to combustion

Synthetic engine oil with the most popular viscosity SAE 10W-40. + Revitalisant oil additive against wear and tear. Designed for engines of cars and small trucks. Formulated on a synthetic basis, which allows stability of operating characteristics during service intervals. Used universally, it is suitable for small cars with petrol engines (or autogas engines), as well as for off-road vehicles with turbo diesel engines. Suitable for driving in the city and on motorways, intensive off-road and cargo transport.

Semi-synthetic 4-stroke engine oil for scooters. During the development, special attention was paid to the specific requirements of scooters in daily use with frequent cold starts and high operating temperatures. Ideal for models with injection engine and catalytic converter. Designed for all four-stroke scooters for which no fully synthetic oil is recommended by the manufacturers. Ideal for use in stop-and-go traffic.

Oil 1 Litre PUTOLINE S4 Road, Off road, scooter API SG/JASO MA/10 W-40 S4 4

Motul 710 2T is a fully synthetic lubricant based on Ester-Technology specially designed for 2 stroke bike engines with premix or injector lube system, operating at high revs and under high load.

MANNOL Energy 5W-30 is a multipurpose multigrade hydrosynthetic engine oil for modern petrol and diesel engines with and without turbocharger.

For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual. Full Synthetic heavy duty oil Enhanced level of protection Low-temperature flow, even at -30˚F Protection against shear-stability degradation

Castrol React DOT 4 Low Temp brake fluid meets the new ISO 4925 Class 6 specification recommend by many vehicle manufacturers. Castrol React DOT 4 Low Temp is fully compatible with other fluids meeting FMVSS 116 DOT 3, DOT 4 and DOT 5.1. However, in order to maintain the superior performance characteristics of this fluid, avoid mixing with other brake fluid products. Advantages Castrol React DOT 4 Low Temp brake fluid not only exhibits excellent high temperature performance but is also formulated to provide improved low temperature performance. It has been specifically designed to have: Lower viscosity at low temperatures High wet boiling point Recommended by a number of vehicle manufacturers …