Amplifiers

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Colour: Black.
UK/EU Power supply included: No
Battery Operation: Yes
Type: DI Box
Made in: China

From the portable desktop-level unit M17, the portable desktop-grade DAC and amp Q7, to the more portable yet desktop-capable M15S, audiophiles’ warm reactions to these models prove many love desktop-level audio gear. After being successfully applied to the three high-end models, the desktop mode will now evolve and be applied to audio dongles. The FiiO KA13 mini desktop amp features a desktop mode to fully unleash its performance.
With two high-performance yet highly efficient CS43131 DAC chips and two low-noise SGM8262 op-amps, this truly “dual-core” golden combo brings excellent performance. Rediscover your music collection again full of newly discovered details with the KA13.
The KA13 f…

Summing Amp effect pedal. The device can combine two signals into one mono signal. It is equipped with one foot switch, two inputs and one output. Thanks to its features, it can send two signals to one amplifier or add a stereo signal to mono. The effect has a robust metal construction and is powered by a 9V adapter (not included).
Power Supply: 9V;Adapter
Made in: USA
UK/EU Power supply included: No

Microphone Pre-Amp / 19 Inch Size / Number of Channels 4 / Rack Height 2 RU

Headphone Amplifier / Number of Channels 6

Enhanced Design and Functionality - The hip-dac 3, now available in a Titanium Shadow hue and encased in a sleek Aluminium frame, is not only visually striking but also encompasses a range of updated features and circuit enhancements, such as new metal film capacitors and an updated GMT circuitry, to elevate your audio experience.
Advanced Connectivity and User-friendly Controls - Equipped with two USB-C ports for simplified cable management, the device facilitates clear and high-quality audio playback and allows simultaneous charging. Furthermore, user-friendly controls such as a switch to activate iFi's iEMatch technology and LEDs that indicate the format and sample rate of the incoming audio …

A Pristine, Compact Sound Amplifier You Build Yourself
The HA-S is a Nutube-equipped DIY Headphone amp kit that will let you enjoy the highest quality audio anywhere. No soldering is required, so even if you are new to the world of DIY, you will be able to assemble the HA-S to add a warm, analog tube-driven signal boost to any sound source in no time!
Made in: Japan
Impedance: 10 Ohm
Battery Type: AA
Inputs: Jack 3,5 mm
Colour: Black
Outputs: Jack 3,5 mm
Weight (g): 110.0
Type: Headphone Amp
UK/EU Power supply included: No
Controls: Volume
Power Supply: None, Only Battery Operated
Battery Operation: Yes

PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card…

Microphone preamplifier Golden Age Project PRE-73 Jr MKIINo integrated circuits are used in the signal pathMax. microphone gain 70 dBSwitchable High-Pass Filter (off/approx. 40 Hz/approx. 170 Hz)2-stage switchable Air EQ (3 or 6 dB gain at 30 kHz)Phantom power supply: + 48 VSwitchable phaseMicrophone input: XLR/jack 6.3 mm comboHi-Z input for guitar/bass: 6.3 mm jackLine output: XLR/jack 6.3 mm comboDesign: desktop formatIncluding external power supplyColor: Red
Power Supply: Adapter
Outputs: Jack 6,3 mm TS;XLR
Inputs: Kombi XLR/TRS;Jack 6,3 mm TS
Package Contents: Adapter
Type: DI Box;Preamp
Controls: Hi-Pass Filter;Gain;Phantom;Output
Number of Channels: 1
Gain: 70 dB
Made in: China
Rackmountable: …

Channel Strip / 19 Inch Size / Processor Type Equalizer / Number of Channels 2 / Rack Height 2 RU

This sleek and elegant transmitter/receiver set brings Sennheiser audio expertise and leading edge digital wireless technology to those wishing to improve their TV viewing with a personalized listening experience. With three different hearing profiles to enhance TV, movies or music, to choose from. Plus a unique Speech Intelligibility feature that reduces TV background noise for added clarity.Features:Your + in TV listening:- Hear it all, enjoy it all. There is no great TV show that cannot be improved by great sound. Which is exactly why Sennheiser developed the Flex 5000. This innovative audio product allows you to tailor the volume, the sound profile and even the speech intelligibility to …

1-channel, 2-band tube equalizer with 20Hz - 50kHz, +/- 1 db frequency range. Input Impedance: 600 Ohm. Low Frequency Boost: 20, 30, 60, 100, 200, 400, and 800 Hz at a maximum of +12 dB, the low frequency cut 20, 30, 60, 100, 200, 400, and 800 Hz at -18 dB maximum, high frequency Boost: 3, 4, 5, 8, 10, 12, and 16 kHz at a maximum of + 18dB, high frequency cut: 3, 4, 5, 10, and 20 kHz -14 dB maximum. 2U, 19" rackmount chassis.
Made in: China
Type: Boost;Equalizer
Rackmountable: Yes
UK/EU Power supply included: Yes
Power Supply: 240V

This single-room, zero-clutter installed wireless audio system delivers superior and immersive audio in any room in the home or garden office, allowing users to wirelessly stream music from any compatible device, listen to radio broadcast and use for TV sound.
Boasts Digital and Analogue inputs for connection of audio sources such as the TV audio. Audio output suitable for a subwoofer.
IP54-rating makes it suitable for kitchens and bathrooms.
3.2-inch colour display. Touch sensitive facia control, both a splash proof and full-size remote controls supplied.
Features Bluetooth 5.0 for wireless streaming of music from compatible devices. Built-in DAB+ and FM radio with one-touch presets.
High-quality …

This single-room, zero-clutter installed wireless audio system delivers superior and immersive audio in any room in the home or garden office, allowing users to wirelessly stream music from any compatible device, listen to radio broadcast and use for TV sound.
Boasts Digital and Analogue inputs for connection of audio sources such as the TV audio. Audio output suitable for a subwoofer.
IP54-rating makes it suitable for kitchens and bathrooms.
3.2-inch colour display. Touch sensitive facia control, both a splash proof and full-size remote controls supplied.
Features Bluetooth 5.0 for wireless streaming of music from compatible devices. Built-in DAB+ and FM radio with one-touch presets.
High-quality …

Summing Amp

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Number of Outputs: 4
Made in: China
Number of Input Port…

Dual reamping direct box. The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 6,35 mm instrument level inputs. The unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. Frequency response is 20 Hz - 20 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,40 kg.
Number of Outputs: 4
Type: Splitter;Ampbox;DI Box
Rackmountable: No
Made in: China
UK/EU Power supply included: No
Number of Input Ports: 4

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and …

The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating …

The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone. While the DM1 DYNAMITE provides a massive +28dB of clean, transparent gain.With a sophisticated class-A design and specially-selected high-grade FETs, sE active inline preamps have vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain provided is always consistent regardless of the connected load, thanks to the DM2's eight switchable impedance setting and the DM1's dedicated buffer amplifiers.For optimum results, they recommend you plug the DM1 or DM2 directly …

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.
Impedance: 135 Ohm;200 Ohm
Number of Channels: …

The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.
Number of Input Ports: 4
UK/EU Power supply included: No
Number of Outputs: 4
Type: …

DI Box / Desktop / Number of Channels 1

*ESS Sabre ES9068x2 DAC chip, RT 6863 x6 OPA chips,supporting up to DSD512 Native, PCM768 KHz@32Bit decoding. Optical, Coaxial and USB support MQA full decoding and rendering.
*Qualcomm QCC5125 Bluetooth 5.0 module supports SBC/AAC/aptX/aptX LL/aptX HD protocol.
*6.35mm single-ended Headphone amp output, driving 16-300 ohm headphones.
*The total harmonic distortion ratiowhich has been measured is -120dB (0.00009%), signal-to-noise ratio and dynamic range are 125dB.
*3-inch LCD screen, control knob and EverSolo mobile controller app is available for easy control.