Amplifiers

Hi-Fi stereo amplifier. Bluetooth receiver. USB/MP3 player. FM radio. Echo microphone inputs. Digital audio input to connect to a TV. Aluminium panel. Remote control for player. POWER: 230 V AC, 350 W more→, RESPONSE: 20-20,000 Hz, S/N RATIO: >85 dB, DISTORTION: Harmonic: < 0.5% at 1 kHz, INPUTS: 3 stereo aux: DVD/AUX/CD, 2 x RCA, 17,000 Ω 300 mV RMS, 1 stereo aux, 3.5 mm jack, 15,000 Ω 300 mV RMS on front panel, 1 digital audio, TOSLINK and RCA, 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUTPUTS: Speakers: Main L/R, 4-16 Ω screw or banana terminals, PROTECTION: Temperature, short circuit and overload
Power Supply: 230V
Inputs: AUX;Jack 3,5 mm;RCA;Jack 6,3 mm (MIC/Line)
Width (cm): 33.0
Type: Amplifier
Battery Operation: No
Signal to Noise Ratio: 70 dB
Impedance: 16 Ohm
Power: 120 W
Number of Channels: 2
Colour: Black
EQ: No
Frequency Range: 20 Hz - 20 kHz
WiFi: No
Package Contents: Power Cable;Manual
LAN: No
Depth (cm): 27.6
Net Weight (kg): 4.2
Radio: FM
Height (cm): 9.2
SD Slot: No
Made in: China
Microphone Input: Yes
Outputs: …

Stereo Pre-Amplifier with Network Streaming & CD-Player
Tired of big expensive stacks with tons of different source devices? No longer an overview of the chaos of the umpteen remote controls ly more→ing around? Then the IOTAVX NP3 is the solution! To call this device just a network player would certainly not do it justice. The NP3 combines convenient streaming functions with a high-quality CD drive DAB + and FM radio and numerous other connection options. Playback via USB audio or Bluetooth (AptX) is just as convenient as using it as a DLNA / Upnp renderer. Thanks to the integrated volume control the NP3 can also be used as a full-fledged pre-amp.

Streaming
The NP3 can be connected to your home &hellip;

Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug- more→in PSU.
Power Supply: Adapter
Battery Operation: No
UK/EU Power supply included: No
Made in: Taiwan

DI Box / Desktop / Number of Channels 1

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables.
Multifunctional: The switch also offers the possibility to switch more→to 2 different pairs of speakers with one amplifier.
Quality: The AMP-S has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.
Safe: The high-quality rotary switch with zero position protects the connected devices - deep banana sockets provide the cables with a secure hold.
Sound: Due to the increased cable cross section, the AMP-S MKII offers optimal signal transmission without distorting the sound of the system.

Collaboratively designed by the EVH team and led by renowned amp engineer, James Brown, the 5150® Iconic® Series 15-watt 1x10 combo has a 6L6 power tube voiced by a complex, multi-stage hybrid more→preamp section anchored by a pair of ECC83 tubes, providing all the muscle you need for a modern-day practice amp. The cabinet features special internal plywood baffling for tight and increased bass response, and houses a custom-designed EVH 10” Celestion® speaker voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate.Punching above its weight, this combo features two channels with an extra voicing on each for …

Hybrid tube stereo Hifi amplifier with built-in USB MP3 player and Bluetooth module. It also contains a 2 line stereo inputs. Electron tubes produce clearer and warmer sound than modern transistors. I more→ncludes bass, treble (+/- 10dB) corrections, overall volume and input switch: CD, Bluetooth / USB, DVD.
Input impedance: 47kOhm
Input sensitivity: 300mV
Signal to noise ratio:> 80 dB
Harmonic distortion:

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance more→( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
UK/EU Power supply included: No
Type: DI Box
Battery Operation: Yes
Power Supply: 48V Phantom
Made in: Germany

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass roll-off filter. C more→onnectors are standard XLR-m to mini XLR-m. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China