Amplifiers

Bluetooth 5.1 High-end Chip QCC5125：Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting more→up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C. Supports TRS Balanced Output. Support DSD Direct.

Bluetooth 5.1 High-end Chip QCC5125:Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting more→up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C,Supports TRS Balanced Output.

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz 4x high-end dual more→op-amp OPA1612 and a large number of audio grade components All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64 Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits

A14 Dual Stereo Mixer-Amplifier 4 x 100WComprehensive 1U PA amplifier with 2 independent stereo zones and a global microphone input. Each zone has an independent audio player module which can select b more→etween USB / microSD mp3 player, FM tuner, Bluetooth receiver, 2 stereo line inputs (rear panel RCA) and another line input on the front panel (3.5mm). Playback can be controlled from the front panel or by the supplied I.R. remote control handsets. In addition, each player has an Aux 4 setting allowing it to connect to the other player module, meaning either one of these players can be used for both zones if needed. Mic inputs 1 and 2 are live to both output zones at all times. 2 pairs of speaker …

Q1000 power amplifier 2 x 500WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack more→or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T5A (240V) / T10A (110V)Power max. : 4 Ohms - 2 x 500WPower rms : 4 Ohms - 2 x 250WPower rms : 8 Ohms - 2 x 160WDimensions - 482 x 380 x 88mm (2U)Weight - 9kg

Headphone Amp / 5.1 / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

Dual ESS ES9038Q2M SABRE HIFI DAC Chips, MQA Full Decoding via USB Support DSD512 Native and PCM 768kHz, MQA Full Decoding via USB 2nd Generation 16 Core XMOS XU216, 4-PIN-XLR and 6.35mm Headphone O more→utput THD+N as low as 0.00010%, 1300mW X2 Output Power DAC + Pre amp applicaion/ Bluetooth receiver/Tablet and phone DAC application

Signal Processor / 19 Inch Size / Number of Channels 2 / Rack Height 1 RU

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 3 RU

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR more→. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR more→. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the