Amplifiers

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC. The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz. 4x high-end dual op-amp OPA1612 and a large number of audio grade components. All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.

The Topping PA7 Class D Power Amplifier is capable of delivering up to 210W into a four-ohm load and 150W at eight ohms. Developed for discreet desktop setups this amps Class D circuit design is perfect for high power output and low distortion relative to its size. It also offers high efficiency and less heat generation making the PA7 the ideal companion for all your home audio devices and enhancing your favourite music films and TV shows with exceptionally low levels of distortion.The PA7 hosts a variety of inputs including XLR TRS balanced and RCA as well as a 12v trigger for system synchronisation and integration. This amp also features bypass mode meaning you can control the volume from …

【Multi-functional SMSL PL200】 PL200 is an MQA-CD player, Bluetooth receiver and USB DAC. It uses a non-compressed CD solution, can fully decode MQA, and uses a Hi-End level CD solution, which is different from the portable solution. There is no compression, all the signals coming out are original, and the JTTER is very low. 【Precision Acces Servo System】 S.M.S.L has developed its own CD playback system, providing audiophile-level dynamic response and playback stability, accurate reading and other features. Additionally, combined with anti-vibration dampers and shock absorbers, this CD player has high reliability. 【Excellent AK4499EX Chip】 The SMSL PL200 MOA-CD player uses the AK4499EX decoding chi…

Features: - Support 4 way microphone input - LED display - Tack output With EQ - Reverberation, fine tuning, balance, SD, USB interface. Specifications: Model: 325BT Size: 26 * 29 * 10cm Rated voltage: 110-240V 50 / 60Hz Rated power: 1200W Peak: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Color: Black Packaged included: 1 x Audio

Low-noise voltage reference power supply: The brand new Low-noise voltage reference power supply effectively reduces the output noises and distortions to excellent level. Basing on this design, the distortion of E70 VELVET is as low as-125db and the noise is no higher than 1.3uVrms. Newest XMOS XU316 support DSD512&PCM7 68kHz USB input of E70 VELVET has a wide range of compaibiity: Windows 10, Windows 11, MAC, Linux, lIOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 and Thesycon custom driver (applicable to Windows, other systems are free of driver),which is stable and reliable.

Bluetooth 5.1 High-end Chip QCC5125:Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C,Supports TRS Balanced Output.

US Series Compact 100V Slave Amplifiers100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.DetailsPower supply 170-264Vac, 50Hz (IEC)Inputs Line (RCA),…

Two-channel amplifier with a power of 2 x 50 W with practical dimensions of 19 x 28 cm. Thoughtful simple solution, ideal for schools, conference rooms, bars and restaurants. Thanks to its sound qualities, it will also appeal to a number of beginning Hi-Fi fans. There are two multifunctional controls on the front panel and a backlit display is located under the black acrylic. In the active state, the display subtly illuminates the black area, in the off state, the forehead is pure black, or with a light point indicating the standby mode. The aluminum bottom of the casing is also a heat sink that dissipates heat from electrical circuits. The internal power supply is provided by a powerful toroidal …

600W 1.8-30MHz HF Power Amplifier HF RF Amplifier Board SSB HF Amp Board for Shortwave Radio DIYFeatures:- Frequency: 1.8-30MHz- Input power: 1-5W- Maximum output power: 600W- Voltage: 12V+53V- Current: 12V (1A); 53V (15A)- Static voltage: 2.7V- Quiescent current: 300mA+300mA- Net weight: 276G/0.6LB- Board size: 138 x 88 x 40mm/5.4 x 3.5 x 1.6" (LxWxH)Package Included:- 1 x HF Power Amplifier

The Marantz Model M1 is a compact streaming amplifier thats set for the future of hi-fi audio home entertainment and wireless music setups. Designed to fit discreetly in your living space or a dedicated hi-fi rack this amp can connect with your HEOS ecosystem and TV making it simple to incorporate into your daily life. The built-in HEOS technology allows for streaming via WiFi AirPlay 2 Bluetooth and Spotify Connect controllable directly from your smartphone or tablet. HDMI eARC and Dolby Digital+ decoding also enhance TV sound quality and allow seamless control via your TV remote for a downsized entertainment experience that doesnt compromise sound quality.The Model M1 delivers 100W per channel …

Features: 20W portable amplifier design for electric drum, electric keyboard and other electric musical instrument. Dual speakers design, 6.5 inch woofer for better bass effect, and 2 inch tweeter for better treble effect. With 2-band EQ(LOW & HIGH) and volume control knobs; supports USB MP3 player function. Supports wireless BT connection, you can connect the amplifier with smartphone/tablet to play music. Compact size and lightweight, the amplifier is a perfect choice for traveling musician. you have a wonderful musical journey. Specifications: Brand: COOLMUSIC Model: DM20 Color: Black Input Jack: 1/4 inch Item Size: 28.6 * 23.2 * 25cm/ 11.3 * 9.1 * 9.8in Package Size: 33 * 28.5 * 28.5cm/ …

Fully discrete NFCA also create wonderful amp: A90 Discrete uses fully discrete components to redesign the NFCA (Nested F eedback Composite Amplifier) module. 4 built-in NFCA-Discrete modules which each them uses 39 transistors build up fully balanced structure. The optimized Voltage Current hybrid feedback architecture along with UHGF (UItra High Gain Feedback) technology provide excellent DC and AC performance. Benefiting from the new design, the output capability is stronger than ever,which allows the amp driving low impedance headphones even more effortlessly. 2 Gain settings :The A90 Discrete has two gain options, which enough to cover a wide variety of headphones: low gain to drive

Integrated Amplifier / Stereo / 3.5mm-In / Bluetooth

TOA VM3360VA Alarm system amplifier 8.0 channels Black

Dual ESS ES9038Q2M SABRE HIFI DAC Chips, MQA Full Decoding via USB Support DSD512 Native and PCM 768kHz, MQA Full Decoding via USB 2nd Generation 16 Core XMOS XU216, 4-PIN-XLR and 6.35mm Headphone Output THD+N as low as 0.00010%, 1300mW X2 Output Power DAC + Pre amp applicaion/ Bluetooth receiver/Tablet and phone DAC application

Built-in two latest audio decoder chip CS43131, with well-designed circuitry to achieve an unprecedented performance of 0.00013% (-117dB) distortion! The new third generation XMOS XU-316, PCM support to 32bit/768kHz, DSD support to DSD256. USB support MQA decoding. Bluetooth 5.0 digital audio input, external antenna, longer transmission distance. The clock system uses independent ultra-low clock jitter and ultra-low phase noise crystal as the audio clock. The built-in high-efficiency power supply chip provides sufficient energy for the decoder, and uses multiple low-noise LDO power supplies. Use a large number of audio-specific audiophile-grade resistors and capacitors. Using 1.29" OLED display.…

KAD-2BT Digital stereo amplifier with Bluetooth® This compact digital amplifier has three selectable stereo inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. This amp also features built-in media player, Bluetooth connectivity and FM receiver. A multi-functional amplifier suitable for both domestic and commercial use. Efficient Class D digital amplifier A high output power of 55W max. per side 3.5mm stereo line input on the front panel 2 stereo line inputs on RCA Spring clip speaker output terminals 2 x 6…