Amplifiers

DX7 Pro+ uses ESS SABRE ES9038PRO, with 32bit Hyper-stream architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX7 Pro+ even better. A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. Close to physical limits: The ability of DX7 Pro+ to restore music has reached to THD+N

Dual Mono Design One AK4499EX per channel, distortion up to an amazing 0.00006%(-124dB) Qualcomm high-end Bluetooth chip, supports LDAC (24bit/96kHz), APTX/HD, SBC, AAC XMOS XU-316 XMOS new third generation USB solution Full lamination shows first-class texture. Higher light transmission to highlight the simplicity and beauty. Combined with fully laminated tempered glass display panel. High-quality and durable. 12-month warranty, you can return the item or replace a new one if you have any problems.

CG Series Guitar Amplifiers Classically styled guitar combo amplifier in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, EQ and outputs. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones. PRODUCT FEATURES: Produce authentic vintage-style clean and driven tones Headphone output for practice Switchable clean and drive/gain channels Classic styling Output 60Wrms SPECIFICATION: Power Supply 230Vac, 50Hz (IEC) Speaker 300mm (12") Controls Clean volume, bass & treble, overdrive gain, (mid) contour, bass,…

Integrated Amplifier / Stereo / Output power per channel 40 Watt / Max Sample Rate 48 kHz / Bitrate 24 bit / Bluetooth

【2*STA516bBE Digital Amplifier Chip】 SMSL SA400 has built-in 2 STA516BE digital power amplifier chips and uses the electronic volume control chip NJW1195 of Japan's NJRC Company. Each channel outputs 230W of undistorted power, easily driving most speakers while enabling precise volume control and Ultra-low distortion 【Super Bass Preamp Output】 Power Amplifier subwoofer preamp output, the output is -30~+10dB adjustable, used to connect active subwoofer speakers to form a 2.1 audio system. it also provides bass, midrange and treble tone controls, so you Sound reproduction can be precisely matched to your taste. The level of the subwoofer output can also be adjusted to get the perfect

Features: Particularly powerful with full 150W + 150W amplifier. 10 channels with XLR and Line mono inputs. 2-band EQ (HI & LOW) on each channel and 5-band graphic equalizer on the main. Built-in 16 kinds of LCD display digital effects. Built-in 48V phantom power for condenser microphone use. With USB & SD/ MMC Card input interface and LCD display. With speaker outputs(L & R) and main XLR outputs (L & R). Great for DJ, stage and karaoke to have a perfect sound effects. Specifications: Color: Dark blue Material: Metal Power adapter: US Item size: 46.5 * 31 * 13cm / 18.3 * 12.2 * 5.1in Item weight: 7.2kg / 15.9lb Package size: 51 * 37.5 * 18cm / 20.1 * 14.8 * 7.1in Package weight: 8.1kg / 17.…

The Topping PA5 MKII Plus is a first-rate compact power amplifier building on the superb quality of the PA5 MKII but with enhanced power capacity. It provides up to 140W at four ohms and 85W at eight ohms per channel. Built with a fully balanced structure and an efficient Class D amplifier circuit the PA5 MKII Plus eliminates unwanted hum and noise to magnify any stereo speakers. With distortion levels measured as low as 0.0003 per cent (eight ohms at five watts) a frequency response of 20Hz - 40kHz and a 124dB dynamic range the PA5 MKII Plus effortlessly produces crystal-clear audio for an excellent listening experience. This power amplifier boasts RCA and TRS inputs enabling easy connectivity …

The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you to use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session. Made in: China Package Contents: Manual;Charger UK/EU …

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of

Digital-to-Analogue Converter

Two ES9039SPRO Chips - Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR (135dB) , greater dynamic range, and lower distortion (

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

Use Rohm's flagship DAC chip BD34301EKV, and fully optimize its performance to make its THD+N as low as-117dB. USB uses XMOS XU-316, a real 32bit USB solution, PCM supports up to 768kHz, and DSD supports up to DSD512 The all-new CK-03 clock processing circuit achieves ultra-low clock jitter, making the clock jitter of fiber coax as excellent as USB. Customized low noise porcupine linear power supply. Qualcomm's latest Bluetooth chip supports SBC, AAC, aptX, aptX HD, LDAC The specially designed discrete component stabilized power supply and multiple low-noise stabilized power supplies provide low-noise power supply for analog circuits.

RM-series 100V Mixer-Amplifier with DAB+, BT, USB/SD5-channel 19" rack-mountable mixer-amplifier, tailored to commercial sound installations to power 100V line speakers or standard speakers down to a 4 Ohm load. Input options include XLR (with switchable phantom power), mic/line jack, and RCA line. Features an inbuilt DAB+/FM radio tuner, front-mounted SD/USB ports, and Bluetooth® connectivity, all controlled via an integrated media player for hassle-free playback. A switchable ‘voiceover’ feature automatically lowers the background music volume when a signal is detected via mic input 1 and rear panel 24V contacts can mute all except mic input 1 when triggered. Outputs on screw terminla are v…

The maximum power is 450W+450W and RMS 70W+70W, which can be used for multi speaker impedance of 4-16 ohms, allowing you to enjoy high-performance speakers or components. It has roaring bass, crisp treble, and excellent richness, and most amplifiers can only be used for reminders. 2 microphone inputs are perfect for karaoke Allow 12V DC or 110V/60Hz AC power adapter input. Our -55 amplifier comes with an AC power cord, so you don't need to purchase an additional AC power cord. This stable power supply can maintain stable playback of all types of music. Specification: Model: AK55 Impedance: 4-16 Bluetooth: 5.0 RMS power: 70Wx2 power: 450W x2 Channel: 2.0 Voltage: DC 12V or AC 90-240V : 85 …