Amplifiers

The JBL MA710HP 7.2 Channel 8K High Performance AV Receiver transforms your home cinema experience with stunning 8K/60Hz and 4K/120Hz resolution and up to 7.2 channels of surround sound. As the first High-Performance model in the JBL MA series it features a low-noise Class D 125W RMS power output and is Dirac Live Ready for advanced room correction. The inclusion of a high-resolution 192kHz/24-bit DAC also ensures that every detail of your audio is captured and reproduced with remarkable clarity perfect for audiophile-level home audio.Immerse yourself in Dolby Atmos and DTS decoding for a soundscape that truly maximises your speakers potential with lifelike spatial audio in a three-dimensional …

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Power Amp / Stereo / Output power per channel 500 Watt / XLRIn Balanced

TOA A-2120DD audio amplifier 1.0 channels Performance/stage Black

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

Features: MINI STEREO AMPLIFIER Brand New High Quality Product Further details about the product, Please read full description

Collingwood PR3011 350mA RGBW/RGB Power Repeater

Foldable amplifier stand that can hold monitor speakers, amplifiers or other equipment to a maximum weight of 35 kg without a problem. The angled tube front legs with cross braces have significantly improved the stand's stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. The stand is made of steel and the support arms are covered with non-marring rubber for better protection of the equipment. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8'' or 5/8''. Adjustable height: 570-990 mm. Folded size: 122 x 86 x 602 mm. Support de…

Complete installation set comprising a WA-215 wall amplifier with inbuilt media player and Bluetooth, and a pair of 165mmØ (6.5”) 15W ceiling speakers with 10m speaker cable. Quick and easy to install, these in-ceiling speakers provide a full background music system for discreet installation in the home or commercial premises. Features: Bluetooth connectivity Touch operated control panel Audio playback from USB or microSD Inbuilt FM tuner IR remote control Specifications: Power supply: 100-240Vac, 50/60Hz (Euroblock terminal) Rated output power: 2 x 15W @ 8 Ohms Minimum impedance: 8 Ohms (each output) Bluetooth version: 4.1 Cutout: 170mmØ (each speaker) SPL: 98dB (1W, …

The Topping PA5 MKII Plus is a first-rate compact power amplifier building on the superb quality of the PA5 MKII but with enhanced power capacity. It provides up to 140W at four ohms and 85W at eight ohms per channel. Built with a fully balanced structure and an efficient Class D amplifier circuit the PA5 MKII Plus eliminates unwanted hum and noise to magnify any stereo speakers. With distortion levels measured as low as 0.0003 per cent (eight ohms at five watts) a frequency response of 20Hz - 40kHz and a 124dB dynamic range the PA5 MKII Plus effortlessly produces crystal-clear audio for an excellent listening experience. This power amplifier boasts RCA and TRS inputs enabling easy connectivity …

Preamplifier / Output power per channel 25 Watt / 4x LINE In (Cinch/RCA, Stereo)

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Bluetooth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Support MQA full decoding: 1. Clean up the recording. When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard. 2. Encapsulate the sound. Once the blur in the recording is removed,MQA will use what we call a "musical origami" process, Cleverly makes this large resolution file easy to manage and can compatible with any service or playback device. Flagship DAC chips 1pcs AK4191+2pcs AK4499EX Tapping into the full potential of the chip. CD Player + MQA-Enabled DAC: Your CD