Amplifiers

Germany's Infineon's new digiral high-power amplifier chip. Japan's NJRC company electronic volume control chip NJW1194. It can be bridged into a single-channel amplifier with higher power to drive a more→large speaker. The built-in high-pass filter circuit can filter out the subwoofer, drive the main speaker, and cooperate with the subwoofer to form a 2.1 system. Equipped with subwoofer signal pre-output, it is convenient to connect active subwoofers to form a 2.1 system. 165W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.004% THD). 12-month warranty, you can return the item or replace a new one if you have any problems.

The Q Acoustics AVA Black Stereo Amplifier featuring Bluetooth stands as the central hub within a dynamic 2.1 music and home cinema setup. Specifically crafted for the 7000LRi Speakers this stereo AV more→amplifier delivers an impressive 50 watts of power per channel. Not only does it aesthetically align with the Q Acoustics 7000LRi Speakers but it also offers a plethora of connectivity options including an optical input for your TV 3.5mm Jack and the convenience of Bluetooth pairing. Moreover the inclusion of MoviEQ a dedicated EQ system elevates your cinematic experience by finely tuning the audio for optimized movie performance immersing you deeper into the on-screen action. Experience unparalleled …

Features: HIGH POWER L-PAD - MONO Brand New High Quality Product Further details about the product, Please read full description

CB-15BT Bass Amplifier with Bluetooth®Compact combo amplifier for bass guitar with 3-band EQ and built-in Bluetooth receiver. Built into a sturdy closed-back cabinet with a 15W amplifier section drivi more→ng a custom voiced driver for low end that can reproduce the lower frequencies from a bass instrument. An ideal practice or recording amplifier for all types of bass guitars.DetailsPower supply 230Vac, 50Hz (IEC)Output power rms 15WConnections Guitar in, Headphones out Speaker size 165mmØ (6.5")EQ controls Bass, Mid, TrebleDimensions 270 x 260 x 165mmWeight 4.04kg

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume more→controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

This WIFI digital amplifier simplifies room sound with two speakers, eliminating the need for complex cabling and music source. It is small and compact. Uses a WIFI network connection. It allows you t more→o play music from local, network and Internet repositories and services, Internet radio, including podcasts. Includes USB / MP3 player with Bluetooth connection. It has a stereo line input (2x RCA), optical (Toslink) input, output to an active subwoofer (RCA) and headphone output (3.5 mm jack). A remote control is supplied to control the device. We also recommend using the AUDIOCAST or SMART SONIX application to control and set up Internet radios. With these applications, you can control the switching …

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power more→is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of

High-quality phono stage for entry-level and mid-level record players Amplification and RIAA equalisation for Moving Magnet (MM) cartridges Special low-noise components, external power supply and in more→ternal shielding all help improve the overall sound Small size and attractive chassis allows installation close to record player

Features: Particularly powerful with full 150W + 150W amplifier. 10 channels with XLR and Line mono inputs. 2-band EQ (HI & LOW) on each channel and 5-band graphic equalizer on the main. Built-in 16 k more→inds of LCD display digital effects. Built-in 48V phantom power for condenser microphone use. With USB & SD/ MMC Card input interface and LCD display. With speaker outputs(L & R) and main XLR outputs (L & R). Great for DJ, stage and karaoke to have a perfect sound effects. Specifications: Color: Dark blue Material: Metal Power adapter: US Item size: 46.5 * 31 * 13cm / 18.3 * 12.2 * 5.1in Item weight: 7.2kg / 15.9lb Package size: 51 * 37.5 * 18cm / 20.1 * 14.8 * 7.1in Package weight: 8.1kg / 17.…

DI Box / Desktop / Number of Channels 2

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interfa more→ce and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …