Amplifiers

TOA A-2030DD audio amplifier 1.0 channels Performance/stage Black

Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30. With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Max output power: 3500mW x@16Ω, 540mW x@300Ω L50 adopts the New NFCA circuit. L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.

Signal Processor / 19 Inch Size / Number of Channels 2 / Rack Height 1 RU

Support 2 inputs, RCA and 3.5mm jack input. Flexible and easy to connect with all the latest audio device, with memory function, human scientific design. MCU control. Based on the work of the state machine, real-time monitoring, easy to operate and understand, and also suitable for modern usage and protection of personal safety. 360-degree rotating electronic volume control. Startup sound settings can prevent excessive damage a horn or personal safety, and also can prevent the noise caused by poor contact potentiometer and other undesirable phenomena. Bass signal output, it can connect external active subwoofer. Support EQ bass and treble adjustment, it increases product playability.

Product Country Of Origin: China Product Weight: 2235 (GR) Product Pack Size: Pack of 1

US Series Compact 100V Slave Amplifiers100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.DetailsPower supply 170-264Vac, 50Hz (IEC)Inputs Line (RCA),…

Class D amplifier providing 150 watts/channel (RMS) into 8 ohm loads or 225 watts/channel into 4-Ohm loads Bridgeable output provides 450 watts into a single 8-ohm Load 4-Pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire Built-in thermal and short circuit protection circuits Includes rackmount ears

Amplifier 24v Power Adapter Ac100-240v To Dc24v 4.5a Power Supply For Tpa3116,. Features: Input Voltage: AC100-240V 1.8A 50/60HZ AC±10% Rated Voltage: DC24V 4.5A Rated Current: 4.5A Max Power: 108W Energy Efficiency Rating: VI Energy Efficiency Working Efficiency: 88% No-load Power Consumption:

Power Amplifier / Total Connected Load 700 W / Number of Channels 1

▶️MA12070 x 2 Merus Class D - Each channel of PA3s uses one MA12070 Class D power amplifier chip. The power is shared across 2 chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. ▶️Balanced and Single-ended Inputs - PA3s provides TRS balanced input and RCA single-ended input which can meet needs of different signal transmission. Two inputs are selectable using the front panel button. ▶️High Output Power - The output power of PA3s is enough to drive any bookshelf speakers and even some floor speakers that it could output 80W x 2 @4Ω, 10% THD+N and 65W x 2 @4Ω, 1% THD+N. ▶️D10 Balanced could be the best

Super audio reproduction ability with ultra low distortion The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream I1 architecture. In the application of E70, every 4 channels are connected in parallel as one channel,achieving high performance and high sound quality at the same time. Brand new IN conversion A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion,lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. LDAC 24bit96kHz

A300 uses the electronic volume control chip NJW1194 from the Japanese company NJRC, which has precise volume control and extremely low distortion. the new digital high-performance amplifier chip from Germany Infineon has higher quality, high efficiency and low energy consumption It can be bridged to a higher power single channel amplifier (BTL) to power large speakers. With the subwoofer signal pre-output, it is convenient to connect an active subwoofer to a 2.1 system. The built-in patented SMSL SDB sound effect and treble/bass adjustment function can easily adjust different speakers and music. the built-in high-pass filter circuit filters out the subwoofer, drives the main speaker and works …

KAD-2BT Digital stereo amplifier with Bluetooth® This compact digital amplifier has three selectable stereo inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. This amp also features built-in media player, Bluetooth connectivity and FM receiver. A multi-functional amplifier suitable for both domestic and commercial use. Efficient Class D digital amplifier A high output power of 55W max. per side 3.5mm stereo line input on the front panel 2 stereo line inputs on RCA Spring clip speaker output terminals 2 x 6…

Foldable amplifier stand that can hold monitor speakers, amplifiers or other equipment to a maximum weight of 35 kg without a problem. The angled tube front legs with cross braces have significantly improved the stand's stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. The stand is made of steel and the support arms are covered with non-marring rubber for better protection of the equipment. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8'' or 5/8''. Adjustable height: 570-990 mm. Folded size: 122 x 86 x 602 mm. Support de…

This is a nonpowered volume controlling splitter for your sound system. It enables you to run 2 amps with speaker selection, easy to hook up with banana plug connections, and each channel can support up to 300W! Features: Supports two power amplifier inputs, four speaker outputs.(4 sets of speakers can be turned on or off independently). Four sets of stereo speakers can sound at the same time, or one or more sets of speakers can be turned off separately, manually select a pushbutton switch. Offers banana plug connections, and each channel supports power up to 300W. Provides 6.5mm earphone output with adjustable volume knob. Signal input provides noload protection of vacuum tube power amplifier …

Headphone Amplifier

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of