Amplifiers

Dual reamping direct box. The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 6,35 mm and XLR inputs are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. Frequency response: 10 Hz - 100 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,38 …

The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating …

The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.
Rackmountable: No
UK/EU Power supply included: No
Type: DI Box
Number of Input Ports: …

*ESS Sabre ES9068x2 DAC chip, RT 6863 x6 OPA chips,supporting up to DSD512 Native, PCM768 KHz@32Bit decoding. Optical, Coaxial and USB support MQA full decoding and rendering.
*Qualcomm QCC5125 Bluetooth 5.0 module supports SBC/AAC/aptX/aptX LL/aptX HD protocol.
*6.35mm single-ended Headphone amp output, driving 16-300 ohm headphones.
*The total harmonic distortion ratiowhich has been measured is -120dB (0.00009%), signal-to-noise ratio and dynamic range are 125dB.
*3-inch LCD screen, control knob and EverSolo mobile controller app is available for easy control.

Microphone Pre-Amp / Desktop / Number of Channels 1

Microphone Pre-Amp / Desktop / Number of Channels 2

Focusrite Clarett OCTOPRE is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. Clarett's leading preamplifiers operate at 24 bit / 192 kHz and offer a dynamic range of up to 118 dB. AIR technology, which adds airiness and clarity to recordings, emulates the impedance and resonance characteristics of the legendary Focusrite ISA analogue studio preamplifier. Two analog inputs located on the front panel are capable of processing both microphone and direct instrument (Hi-Z) signals.

The transmitter has eight analog inputs with combined XLR / TRS connectors. Each input channel is equipped with insertion points for connecting external processors. The signal can …

XLR Microphone Adapter for Mirrorless Cameras for Professional Quality Video Recording
Equipped with 2 XLR/TRS input terminals, you can use the optimum microphone according to the set and environment
Equipped with a high-performance AD converter, it can directly transmit digital audio without deterioration to the camera via a accessory shoe. (Compatible manufacturers: Canon, FUJIFILM)
Equipped with a high-performance HDDA mic preamplifier for high sound quality, low noise, and wide dynamic range (microphone / line level switching, + 48V phantom power supply compatible)

Microphone Pre-Amp

Microphone Pre-Amp

FiiO BTR7 is designed with a complete audio architecture consisting of a premium Dual DAC chipset with a Low-pass filter and dual THX amplifier chips. It can easily compete against a premium HiFi player with its excellently detailed and precise sound performance. FiiO BTR7 is designed with dual Sabre DAC chipsets. It houses two ES9219C DAC chips from ESS Sabre Technologies. Supported by the latest XMOS XU208 8-core USB controller chipset, the BTR7 can also be used as a high-resolution USB DAC/AMP. It handles native 32-Bit/384kHz PCM signal decoding. Fiio has features Qualcomm’s latest QCC5124 Bluetooth chipset on the latest BTR7. It delivers impressive Bluetooth connectivity with ultra-low …

DI Box / Desktop

Pm11225 Years WarrantyMultifunctional Stereo Pre-AmplifierThe Pm1122 Is A Stereo Pre-Amplifier Ideal For 1 And 2 Zone Applications Where You Want To Have A Different Volume Setting And Where A Different Sound Source Is Needed. This Pre-Amplifier Has 2 Stereo Output Zones And Up To 10 Inputs (6 Mic-Line And 4 Line Inputs). All Mic/Line Inputs Can Be Assigned To Zone 1 Zone 2 Or Both Output Zones What Allows You To Create A True 2-Zone System.Multiple Remote Control Options Are Available For The Pm1122. The Pm1122r Is An Analogue Wall Control Panel That Has Music Level And Micro Mix Level Control And Also A Line Input Selector. The Pm1122rl Analogue Wall Control Panel Has The Same Functions As …

BUZZSTOPIII
5 Years Warranty

Universal Stereo Input Adapter

The BUZZSTOP-MKIII is a universal input adaptor that can be used for all connections and extensions. The input level selector allows you to convert any amplifier output to any line-level output balanced or unbalanced. (E.g.: You can convert a 100V loudspeaker signal into a balanced or unbalanced line level signal). The BUZZSTOP-MKIII also makes it possible to convert an unbalanced signal into balanced and vice versa.

A 19” adaptor set is available. This way it is possible to mount 2 BUZZSTOP-MKIII in a 19” rack. (REF: BUZZ-19)

Often the BUZZSTOP-MKIII is used to solve humm and buzz problems via the build-in …

Integrated Amplifier / Stereo / Output power per channel 100 Watt / 3.5mm-In / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Integrated Amplifier / Stereo / Output power per channel 100 Watt / 3.5mm-In / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

The TEAC AI-303-S Audio Amplifier Silver is a high-quality amplifier designed to enhance your audio listening experience. It boasts a sleek silver finish that adds a touch of elegance to any home entertainment setup.This amplifier utilizes advanced Artificial Intelligence (AI) technology to deliver crystal clear sound with exceptional clarity and detail. It is equipped with a powerful Class D amplifier that produces a robust and dynamic sound output, making it perfect for both music and movie lovers.The TEAC AI-303-S comes with various input options, including RCA, Bluetooth, and USB, allowing you to connect it to a wide range of audio sources. It also has a built-in phono stage, enabling you …

The Astell&Kern ACRO CA1000T Headphone Amplifier & DAC is a completely portable all-in-one system for headphone enthusiasts. A cornucopia of connectivity options are available for inclusion in audiophile-grade desktop systems with inputs and outputs that cover links from source to speaker. Monitor everything from the comprehensive LCD touchscreen and hear the difference.The CA1000T uses advanced decoding support ES9039MPRO dual-DACs and a Twin Triode KORG Nutube tube design to maximise your listening experience with high-resolution conversion capabilities. Through sensitive in-ear monitors power-hungry headphones and everything in between find the joy in crisp dynamic listening.

Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …

Dynamic Processor / 19 Inch Size / Processor Type Limiter / Number of Channels 1 / Rack Height 2 RU

Lindy SPDIF DAC Pro with Headphone Amp

The Lindy SPDIF Converter and Repeater allows the user to input digital audio through a Coaxial or optical port and output digital audio simultaneously through Coaxial and optical ports, for dual audio functionality, avoiding the need for two separate audio converters, and a high resolution listening experience of movies, games and music.Featuring Digital Coaxial and Toslink ports as both input and output connections, this converter is perfect for converting Coaxial signals to optical, great for connecting DVD players or legacy games consoles to home cinema receivers or soundbars, or when connecting Blu-Ray players and games consoles to some surround sound systems or amplifiers via Optical to …

Dynamic Processor / Series 500 Module / Processor Type Compressor / Number of Channels 1

The dbx 530 Parametric EQ offers a unique degree of equalization flexibility in the popular 500 Series format. Based upon the classic dbx 905, the dbx 530 is an uncompromising equalizer offering true, fully parametric operation of all three filter bands! dbx has a much-heralded history with modular processors dating back to our 900 Series, and the dbx 530 continues that tradition. - Based on the classic dbx 905 - 3-band parametric EQ - Selectable bell or shelf type filters on low and high frequency bands - Adjustable Q on each band
Made in: China
UK/EU Power supply included: Yes
Type: Equalizer
Power Supply: 240V