only amplifiersin all categories
only amplifiers
United Kingdom

Amplifiers

 prices on 995 models  
Show
The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a silver finish that will fit in with your homes character.
£149.00
AV.com
Delivery: in United Kingdom
Report
Buy!
AV.com
£1,609.32
Electricshop.com
Delivery: to United Kingdom
Report
Buy!
Electricshop.com
Preamplifier / Output power per channel 25 Watt / 4x LINE In (Cinch/RCA, Stereo)
£866.21
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth
£98.99
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Bluetooth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel
£219.00
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
You may be interested in
Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and
£149.00
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Support MQA full decoding: 1. Clean up the recording. When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard. 2. Encapsulate the sound. Once the blur in the recording is removed,MQA will use what we call a "musical origami" process, Cleverly makes this large resolution file easy to manage and can compatible with any service or playback device. Flagship DAC chips 1pcs AK4191+2pcs AK4499EX Tapping into the full potential of the chip. CD Player + MQA-Enabled DAC: Your CD
£959.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
The Madison MAD1000 is a compact and affordable stereo amplifier that delivers up to 2x30W of power RMS at 4 ohms. It features a 30-20kHz frequency response, signal-to-noise ratio of >77dB, and bass, treble, and volume controls. The amplifier also includes Bluetooth connectivity for wireless music streaming from your smartphone, tablet, or other Bluetooth-enabled devices. Key features:Compact and portable design: The amplifier is only 244x202x67mm and weighs 2.9kg, making it easy to transport.Powerful audio: The amplifier delivers up to 2x30W of power RMS at 4 ohms, which is enough to drive most bookshelf speakers.Wide frequency response: The amplifier covers the frequency range of 30Hz to 20kHz,…
£119.00
Muziker.co.uk
Delivery: in United Kingdom
Report
Buy!
Muziker.co.uk
US Series Compact 100V Slave Amplifiers100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.DetailsPower supply 170-264Vac, 50Hz (IEC)Inputs Line (RCA),…
£149.92
Boxed2me.co.uk
Delivery: in United Kingdom
Report
Buy!
Boxed2me.co.uk
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Battery Operation: Yes
Power Supply: 48V Phantom
UK/EU Power supply included: No
Made in: Germany
from £50.45 up to £58.80 
Compare prices and buy Palmer PAN 02 PAN02
Idealo.co.uk (United Kingdom) →
£50.00
Gear4Music.com (United Kingdom) →
£58.00
Muziker.co.uk (United Kingdom) →
£59.00
Compare prices3→
The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals. Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. Frequency response is 20 Hz - 20 kHz. Dimensions: 531 x 178 x 89 mm. Weight: 1,9 kg.
Type: Splitter
UK/EU Power supply included: No
Made in: China
from £309.00 up to £316.00 
Compare prices and buy ART S8
Gear4Music.com (United Kingdom) →
£309.00
Idealo.co.uk (United Kingdom) →
£309.00
Scan.co.uk  →
£311.00
Muziker.co.uk (United Kingdom) →
£316.00
Compare prices4→
1 ... 40 41 42
Filters
Price
from£ up to£ 
Brands
Colour
Device type
Features
Element base
Number of channels
Power per channel (4 Ω)
Power per channel (8 Ω)
Signal-to-noise ratio (Main)
Main input
Release year
more
Signal to noise ratio (line input)
Number of stereo RCA inputs
Line input sensitivity
Adjustments
Features
Inputs
Outputs
Control
Mount size
Width
Depth
Height
Got ideas or questions about filters? Click here!
Models