Amplifiers

CI Amp IA60-4
A highly compact incredibly versatile four-channel custom installation amplifier the IA60-4 can be configured to deliver four channels of 60 W or 2 channels at 125 W.

Monitor Audio Installation Amplifiers are built to perform at the highest levels while taking up the least rack space. The IA60-4 may be entry-level but it features full DSP matrix configuration and offers flexible power options: it can be configured to deliver four channels of 60W or 2 channels at 125 W or using power sharing it can deliver a single channel of 250 W with no loss of performance. All this from a rugged 1U half-size space-saving design. The IA60-4 is ideal for two zone stereo applications height …

PPX300 power amplifier19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationSwitchable clip limiterRemovable handles for low profile installPower rms @ 4 Ohms - 150W + 150WPower rms @ 8 Ohms - 100W + 100WPower rms bridge @ 8 Ohms - 300WDimensions - 88 x 483 x 266mm (2U)Weight - 8.2kg

Signal Processor / 19 Inch Size / Number of Channels 2 / Rack Height 1 RU

Compact all-tube microphone preamplifier/D.I. box that delivers the classic Putnam 610 tube console sound in a portable, highly versatile design. It provides the silky, vintage warmth of the original console’s mic amp design, and will flatter and enhance any microphone or instrument with its iconic tones. Thanks to its convenient form factor, it can be conveniently used in the control room or the recording room, on stage, or on a desktop. The preamplifier offers Mic and DI inputs, and Gain and Level controls for myriad clean or colored sounds. Unlike its predecessors, the SOLO/610 has continuous Gain control with even greater range, allowing for precise gain structuring. It has all of the es…

DI Box / Desktop / Number of Channels 1

Hi-Fi stereo amplifier. Bluetooth receiver. USB/MP3 player. FM radio. Echo microphone inputs. Digital audio input to connect to a TV. Aluminium panel. Remote control for player. POWER: 230 V AC, 350 W, RESPONSE: 20-20,000 Hz, S/N RATIO: >85 dB, DISTORTION: Harmonic: < 0.5% at 1 kHz, INPUTS: 3 stereo aux: DVD/AUX/CD, 2 x RCA, 17,000 Ω 300 mV RMS, 1 stereo aux, 3.5 mm jack, 15,000 Ω 300 mV RMS on front panel, 1 digital audio, TOSLINK and RCA, 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUTPUTS: Speakers: Main L/R, 4-16 Ω screw or banana terminals, PROTECTION: Temperature, short circuit and overload
Inputs: Jack 3,5 mm;RCA;Jack 6,3 mm (MIC/Line);AUX
Depth (cm): 27.6
Power Supply: 230V
USB: Yes
MP3 / Line In: Yes
Impedance: 16 Ohm
Signal to Noise Ratio: 70 dB
Package Contents: Manual;Power Cable
LAN: No
Outputs: Speaker OUT
WiFi: No
Power: 120 W
Microphone Input: Yes
Width (cm): 33.0
Number of Channels: 2
Frequency Range: 20 Hz - 20 kHz
Battery Operation: No
Made in: China
Radio: FM
SD Slot: No
Type: Amplifier
EQ: No
Bluetooth: …

Enhanced Design and Functionality - The hip-dac 3, now available in a Titanium Shadow hue and encased in a sleek Aluminium frame, is not only visually striking but also encompasses a range of updated features and circuit enhancements, such as new metal film capacitors and an updated GMT circuitry, to elevate your audio experience.
Advanced Connectivity and User-friendly Controls - Equipped with two USB-C ports for simplified cable management, the device facilitates clear and high-quality audio playback and allows simultaneous charging. Furthermore, user-friendly controls such as a switch to activate iFi's iEMatch technology and LEDs that indicate the format and sample rate of the incoming audio …

Q480 power amplifier 2 x 240WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T5A (240V) / T10A (110V)Power max. : 4 Ohms - 2 x 240WPower rms : 4 Ohms - 2 x 120WPower rms : 8 Ohms - 2 x 80WDimensions - 482 x 300 x 88mm (2U)Weight - 6.45kg

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Made in: Germany
Type: DI Box
UK/EU Power supply included: No

Signal Splitter / Desktop / Number of Channels 1

The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4 "" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion …