Amplifiers

✅ FULL MQA DECODING - Native DSD (up to DSD512) and full MQA decoding up to 384kHZ ON POWERFUL 16 - core XMOS processor
✅ ULTRA RES AUDIO - Ultra - res PCM up to 32- bit / 768kHz via USB or 192kHz via optical or coaxial and Advanced 96kHz Bluetooth 5.1 + module with QCC5100 chipset supports various HD formats including aptX HD, aptX Adaptive, LDAC and HWA / LHDC.
✅ MULTIPLE CONNECTIONS - Balanced (4.4mm Pentaconn) and S - Balanced (3.5mm) analogue inputs and outputs. Built - in iEmatch and auto - gain technology automatically adjusts output to suit headphones / IEM sensitivity.
✅TECH PACKED - With technology like: XBass and xSpace settings, balanced circuit design with OptimaLoop multi - …

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Type: DI Box
Made in: China
UK/EU Power supply included: No…

DI Box / Desktop / Number of Channels 1

Hi-Fi stereo amplifier. Bluetooth receiver. USB/MP3 player. FM radio. Microphone inputs with echo and tone. Aluminium panel. Remote control for player. POWER: 30 + 30 W RMS at 4 Ω, RESPONSE: 20-20,000 Hz, S/N RATIO: >70 dB, DISTORTION: Harmonic: < 0.5% at 1 kHz, INPUTS: 3 stereo inputs: DVD/AUX/CD, 2 x RCA 200 mV RMS, 1 stereo aux, 3.5 mm jack 200 mV RMS on front panel, 2 balanced mics, 6.3 mm jack 900 Ω 6 mV RMS, OUTPUTS: Speakers: Main L/R, 4-16 Ω screw or banana terminals, PROTECTION: Temperature, short circuit and overload.
Microphone Input: Yes
Bluetooth: Yes
USB: Yes
MP3 / Line In: Yes
Outputs: Speaker OUT
Package Contents: Manual;Power Cable
Width (cm): 33.0
Made in: China
Impedance: 16 Ohm
Type: Amplifier
Height (cm): 9.2
Signal to Noise Ratio: 70 dB
Number of Channels: 2
Colour: Black
Frequency Range: 20 Hz - 20 kHz
Net Weight (kg): 3.5
Power: 60 W
Inputs: Jack 6,3 mm (MIC/Line);AUX;Jack 3,5 mm;RCA
Depth (cm): 27.6
Radio: FM
WiFi: No
LAN: No
Battery Operation: …

The Tangent DAC II a high-end hi-fi DAC is equipped with a Sabre ES9023 24-bit Stereo Audio DAC. It has multiple digital inputs like coaxial optical digital and USB as well as the latest AptX Bluetooth technology for efficient wireless streaming. Further functionality includes the use as a headphone amplifier. With both RCA and XLR balanced outputs it pairs well with Tangents PowerAmpster II or other power amplifiers. Its sturdy construction and built-in power supply ensure durability and safety during use. The DAC II is designed for convenience with an intuitive interface and compact design. It suits music enthusiasts desiring top-tier sound quality or those intending to enhance their audio …

SA-series Secure Wall Amplifier 100V with UHF Mic + Media PlayerPublic address mixer-amplifier built into a surface-mount secure box. A powerful output can drive either 100V line or low impedance speakers from binding post terminals inside the cabinet. The system includes a handheld UHF microphone with an inbuilt receiver and 2 switchable wired mic/line inputs are provided on combo XLR/jack sockets. Each mic input has switchable +48V phantom power and priority override, whch mutes the Aux inputs during voice operation. An internal media player enables playback of audio tracks from USB/SD player, FM tuner or Bluetooth pairing. Alternatively, line inputs can be connected to the Aux 1 RCA sockets …