Amplifiers

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. Support amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier.

Module model: BTM525 Bluetooth chip: QCC5125, 32m SPI flash built in the module Bluetooth version: 5.1 supply voltage: 3.0-4.3v Type: I2S Module size: 13mm x 18mm x 2.5mm Material:ABS colour:As shown Package Contents: 1 x Stereo Audio Module Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

【High Performance DAC AMP Chip】: The SMSL AO300 uses the MA5332MS power amplifier chip, the CS43131 decoding headphone amplifier chip, and the NJW1194 Volume Control Chip. These cutting-edge chips have been designed to deliver exceptional audio performance, with minimum distortion and interference. It supports MQA and MQA-CD decoding and restores the sound of the recording studio. 【2.1 Channel Audio Amplifier System】: The stereo amplifier features a 2.1-channel active audio system with subwoofer output, delivering an output power of 165W x 165W. This system has been carefully designed to provide an immersive audio experience with deep bass and rich sound quality. Bluetooth 5.1 also

Headphone Amplifier

The JBL MA510 5.2 Channel AV Receiver is a step up from the MA310 model thanks to its support for both 8K/60Hz and 4K/120Hz visuals. The four HDMI 2.1 inputs let you relish ultra-high-definition video providing an incredibly detailed and lifelike picture. This AVR even features HDR10+ and Dolby Vision technologies for enhanced brightness contrast and colour accuracy. The receivers efficient Class D amplifier produces 75W of power to 5.2 channels providing a low-noise sound to your audio sources. For gaming HDMI 2.1 technology in the MA510 supports Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) providing seamless gaming experiences with reduced input lag and screen tearing. VRR …

Two-channel amplifier with a power of 2 x 50 W with practical dimensions of 19 x 28 cm. Thoughtful simple solution, ideal for schools, conference rooms, bars and restaurants. Thanks to its sound qualities, it will also appeal to a number of beginning Hi-Fi fans. There are two multifunctional controls on the front panel and a backlit display is located under the black acrylic. In the active state, the display subtly illuminates the black area, in the off state, the forehead is pure black, or with a light point indicating the standby mode. The aluminum bottom of the casing is also a heat sink that dissipates heat from electrical circuits. The internal power supply is provided by a powerful toroidal …

Function: - Two signal inputs: DVD signal and AUX signal - LINE output, signal output can be connected to active subwoofer or other equipment signal source - Center surround output, 5 channels including center one, surround two - 115V/230V Power conversion - With remote control - bluetooth 5.0 - 5-band EQ mixer - Reverberation, fine tuning, balance - FM audio and playback function - Support: plug in U disk, audio input (DVD/VCD/CD/MP3/ computer, etc.) - SD, USB interface, 2microphone inputs. - With microphone reverb and delay adjustment - Power off memory playing - Switch machine horn protection function - Short circuit protection function - Overload protection function Specifications:

High-end audio - TOPPING DX3 Pro+ is a high-performance DAC with USB, Optical, Coaxial, Bluetooth input, Line Out and headphone amplifier output. About Topping DX3 Pro+ - Equipped with the latest QCC5125 chip, it supports LDAC / AAC / SBC / APTX / APTX LL / APTX HD protocols. It uses the ES9038Q2M decoder, supports high-resolution music transmission, and can be played back with clear sound. Bluetooth 5.0 - Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+'s output, then DX3Pro+ becomes your Bluetooth Headphone amp 1 Bluetooth DAC. You can easily enjoy the high quality music and convenience

Q600 Series Stereo Power Amplifiers Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers. 6.3mm jack or RCA inputs SPK, 6.3mm jack or 4mm post outputs Fan cooled 19" rack-mountable (2U) Power supply 230Vac, 50Hz (IEC) Frequency response 20Hz - 20kHz Input connectors 6.3mm jack, RCA (L+R) Input sensitivity 775mV, 10k Ohms S/N ratio >98dB …

Product model: XY-S350H Product name: 2.1 channel Bluetooth audio power amplifier board Power supply: above DC12-38V/10A Bluetooth version: 5.1 Audio channel: 2.1 channel Audio input: Bluetooth+AUX+U disk+USB sound card Audio output: left and right channels + subwoofer Frequency range: 20HZ-20KHZ Volume adjustment: high-end encoder knob adjustment, smooth feel Maximum output power of left and right channels: 220W/3Q-36VDC 175W/4Q--36VDC 100W/8Q-36VDC Maximum output power of the subwoofer: 355W/2Q-36VDC 250W/3Q-36VDC 195W/4Q-36VDC Protection mechanism: protection against overvoltage, undervoltage, clipping, short circuit, overheating, etc. Unique function: Support Sinilink-APP to modify the …

Features: Particularly powerful with full 150W + 150W amplifier. 10 channels with XLR and Line mono inputs. 2-band EQ (HI & LOW) on each channel and 5-band graphic equalizer on the main. Built-in 16 kinds of LCD display digital effects. Built-in 48V phantom power for condenser microphone use. With USB & SD/ MMC Card input interface and LCD display. With speaker outputs(L & R) and main XLR outputs (L & R). Great for DJ, stage and karaoke to have a perfect sound effects. Specifications: Color: Dark blue Material: Metal Power adapter: US Item size: 46.5 * 31 * 13cm / 18.3 * 12.2 * 5.1in Item weight: 7.2kg / 15.9lb Package size: 51 * 37.5 * 18cm / 20.1 * 14.8 * 7.1in Package weight: 8.1kg / 17.…

Integrated Amplifier / Stereo / Output power per channel 65 Watt / 1x S/PDIF IN (RCA Coaxial) / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

Super audio reproduction ability with ultra low distortion The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream I1 architecture. In the application of E70, every 4 channels are connected in parallel as one channel,achieving high performance and high sound quality at the same time. Brand new IN conversion A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion,lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. LDAC 24bit96kHz