Amplifiers

D-series Quad Power AmplifiersQuad digital power amplifier in a lightweight 1U rack-mountable format. An energy-efficient switch-mode power section and class-D amplifiication circuit delivers accurate power-on-demand to four independent speaker outputs. Proprietary cool guide technology provides stable temperature management for dependable operation. Each pair of output channels can be separately parallel switched or bridged as a full or part stereo amplifier configuration. For channel A, there is a switchable 120Hz low-pass filter for use with subwoofers and a channels C and D have a switchable stereo pair of 120Hz high pass filters to effectively focus power in full-range cabs operating as …

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolated. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to monitor the input level, headphone volume adjustable. Individual ground lift. switches for each output. Ground Lift switch for the input. Expandable setup thanks to the Bus In/Out sockets. Dimensions: 480 x 165 x 44.5 mm (19" x 1 U). Weight: 4.18 kg. In a black finish.
Made in: Germany
Type: Isolator;Splitter
UK/EU Power supply included: Yes
Power Supply: 240V

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
UK/EU Power supply included: No
Number of Input Port…

DI Box / Desktop / Number of Channels 1

Styled after the iconic Laney Ironheart range, the Laney Ministack is a small amp with a big sound, Bluetooth enabled and perfect for anywhere in the house, backstage or practice. The Ministack-B-Iron model features a clean & drive channel, gain, tone and volume dial, guitar input, Aux in, On-board tape style digital delay with level control, headphone socket and the unique Laney LSI – Laney Smartphone Insert. The LSI allows you to connect your amp to your favourite guitar tone generating app to access all your favourite guitar tones.
MP3 / Line In: Yes
Variant: Bluetooth
Made in: China
Power Supply: Adapter
Controls: Drive;Level;Gain;Tone;Delay Level;Volume;Delay
Number of Input Ports: …

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

EL84s are at the tonal heart of the HT-20R MK III combo and head. They applied decades of valve amp design experience to combine the response and character of this classic British valve with a carefully voiced preamp to create wonderfully lush valve tones. From pure boutique cleans, to mild overdrive that cleans up by backing off the guitar volume control, right up to saturated distortion, this amp does it all.The HT-20R MK III comes equipped with a power reduction feature taking you down to 2W without any tonal compromise, perfect for driving those EL84’s hard at manageable volumes in the studio or home. When you’re ready to take to the stage, switch to full 20W and utilise the …

The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.
Made in: China
UK/EU Power supply included: No
Number of Input Ports: 4
Number of …

Hi-Fi stereo amplifier. Bluetooth receiver. USB/MP3 player. FM radio. Echo microphone inputs. Digital audio input to connect to a TV. Aluminium panel. Remote control for player. POWER: 230 V AC, 350 W, RESPONSE: 20-20,000 Hz, S/N RATIO: >85 dB, DISTORTION: Harmonic: < 0.5% at 1 kHz, INPUTS: 3 stereo aux: DVD/AUX/CD, 2 x RCA, 17,000 Ω 300 mV RMS, 1 stereo aux, 3.5 mm jack, 15,000 Ω 300 mV RMS on front panel, 1 digital audio, TOSLINK and RCA, 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUTPUTS: Speakers: Main L/R, 4-16 Ω screw or banana terminals, PROTECTION: Temperature, short circuit and overload
Made in: China
Inputs: RCA;AUX;Jack 3,5 mm;Jack 6,3 mm (MIC/Line)
Package Contents: Power Cable;Manual
Battery Operation: No
Power Supply: 230V
LAN: No
Power: 120 W
WiFi: No
Signal to Noise Ratio: 70 dB
Impedance: 16 Ohm
Frequency Range: 20 Hz - 20 kHz
Net Weight (kg): 4.2
MP3 / Line In: Yes
Number of Channels: 2
USB: Yes
Outputs: Speaker OUT
Depth (cm): 27.6
EQ: No
Colour: Black
Width (cm): 33.0
Radio: FM
Bluetooth: Yes
Type: Amplifier<…