Amplifiers

The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you to use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session. Switch: Yes Made in: China Package Contents: …

The Elipson Music Centre Connect HD is jam-packed with fantastic features that will augment your music. Bluetooth offers wireless connectivity to your smart devices so you can stream your music with the Ethernet socket providing WiFi and Network connectivity which can create multiroom listening. Equipped with a built-in CD player the Music Centre Connect will magnify your favourite CDs in stunning audio quality. This receiver provides 2 x 120W of power and MP3 FLAC WAV AAC AAC+ codes which will supply incredible sounds. The FM DAB and DAB+ tuner will gift you with all your favourite local and national radio stations. The subwoofer output and headphone output will create an immersive music experience.…

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Superior Audio Quality : The DX1 features a 32-bit AK4493S DAC chip, providing stunning 120dB of dynamic range and

Integrated Amplifier / Stereo / 3.5mm-In / Bluetooth

Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Use the high-end ES9038RO D/A chip from ESS, which is a DAC chip that reaches the industry's high index. The SNR is as high as 140dB, and the total harmonic distortion plus noise is -122dB. At the same time it is a 32-bit, eight-channel DAC chip,with high resolution and high dynamic frequency response, D1se achieves a low distortion rate of 0.00009% (-121dB). USB/Optical/Coaxial/Bluetooth 5.0 input, RCA/XLR output. Bluetooth 5.0 support aptX/ACC/SBC, USB asynchronization transmission, USB compatible windows 7/8/8.1/10, Mac OSX, Linux. All input ports support DSD transmission, coaxial and optical support DoP64! USB uses XMOS XU-216,Real 32bit USB solution, Support Dop and native DSDPCM up to …

CG-10BT Guitar AmplifierClassically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, Volume and EQ, with an additional Drive boost switch. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones. BT wireless pairing capability can be used for playing backing tracks for solo practice or just as a playback device. An ideal practice or recording amplifier for electric guitar players.DetailsPower supply 230Vac, 50Hz (IEC)Output 10WrmsSpeaker 165mm (6.5")Controls Gain, Drive, Volume, Treble,…

It took Joyo’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and so…

The Topping LA90 Discrete Class AB Power Amplifier is a flagship amp with newly developed discrete NFCA technology. It can be configured in stereo or mono mode with the ability to control its own volume and utilise two-step gain settings. Connect via the three provided balanced inputs with XLR or TRS interfaces. With a THD+N of less than 0.0001 per cent the LA90 Discrete reproduces music sources with exceptional accuracy. Its wide working range and low distortion under load make it suitable for various setups. Moreover the amplifiers high-precision CNC machined all-aluminium enclosure not only aids in the exquisite sonic detail but also offers reliable and fast heat dissipation for greater …

Phono Preamplifier

DI Box / Desktop / Number of Channels 2

AK4493S: The DX1 uses newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Plug and play turn your PC into a HIFI source: DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply