Engine Oils

SAE 5W-30. API SP. ACEA C3. MB-Approval 229.51. MB-Approval 229.52. vw 504.00, 507.00. BMW LL-04. C30. FCA 955535-S3 Perf. Advanced Synthetic Technology CoolTech. Controls excessive engine-damaging heat.

MANNOL Energy 5W-30 is a multipurpose multigrade hydrosynthetic engine oil for modern petrol and diesel engines with and without turbocharger.

For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual. Full Synthetic heavy duty oil Enhanced level of protection Low-temperature flow, even at -30˚F Protection against shear-stability degradation

Exceptional resistance to thermal breakdown and deposit formation under the most severe driving conditions Excellent low temperature fluidity and enhanced wear protection in cold weather Less thickening in service than conventional motor oils for enhanced engine protection Reduced oil consumption through less evaporation. less top-up required

A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines.

Dual Film Technology for High Performance Approvals, specifications: ACEA C3, ACEA C2, API SN, API SM, API SL/CF, Opel 0V 040 1547 - D30, VW 502 00/505 01 MB-Approval 229.52, BMW Longlife-04

SAE 5W30-ACEA C4-MB226.51-229.51-Renault RN0722 Developed specifically for Renault engines with particulate filters Fully synthetic lubricant Fuel economy Wear protection

SPECIFICATIONS: SAE 5W-30 Synthetic Engine Oil RECOMMENDATION: ACEA C4, RENAULT RN0720, MB 226.51, MB 229.51, MB 229.31, API SN, NISSAN Diesel engines with DPF PRODUCT PROPERTIES: Innovative universal ester-containing fully synthetic premium engine oil for modern diesel and gasoline engines with and without turbocharger equipped with particulate filters (DFP / FAP). ADDITIONAL INFO: Designed for gasoline and diesel engines of cars and light trucks of European and other manufacturers that comply with EURO III, IV, V standards equipped with catalysts (TWC) and diesel particulate filters (DFP / FAP), where SAE 5W-30 oil, corresponding to ACEA C4, is recommended. DISCLAIMER: The oil is not suitable …

XF Premium LSPI is a fully synthetic oil for use in petrol and hybrid engines. Formulated for OEM vehicles which require a 5w30 viscosity which provides protection against low speed pre-ignition (LSPI) and timing chain wear. Ideally suited to Vauxhall, Opel, Lexus, Nissan, Suzuki and Toyota.XF premium LSPI 5w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesLow speed pre-ignition protection and ultimate protection for

XF Premium C3 V is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C3 5w30 viscosity, predominantly VAG group including Bentley, Lamborghini, Seat, Skoda and Porsche, but also BMW and Mercedes Benz.XF premium C3 V engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use

XF Premium C3 is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C3 5w40 viscosity, including VAG 'PD' Diesel engines and also GM and Mercedes Benz.XF premium C3 5w40 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers

XF Premium C2 ECO is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C2 0w30 viscosity, predominantly Ford and Jaguar Land Rover vehicles.XF premium C2 ECO 0w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils XF

XF Premium C2/C3 is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require C2 or C3 5w30 viscosity, such as BMW, Mercedes Benz and GM Dexos 2 applications.XF premium C2/C3 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils

XF Premium C2 0w30 is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C2 0w30 viscosity, predominantly Peugeot, Citroen and DS.XF premium C2 0w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils XF premium C2 0w30

XF Premium C1 is a fully synthetic, low SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C1 5w30 viscosity, predominantly Land Rover / Range Rover vehicles fitted with Diesel particulate filters (DPF's).XF premium C1 5w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern

A fully synthetic high performance engine oil formulated to meet the demanding requirements of today s engines. Recommended for use in modern vehicles where this type of oil is specified by the manufacturer including Ford and many Japanese models. Trident 5w30 is especially recommended for use in many modern petrol and diesel vehicles that require a fuel efficient lubricant.Provides easy starting and quick circulation of the oil even under very cold conditionsHelps to maximise fuel economy and minimise emissionsProtects against wear under arduous operating conditionAllows the use of the modern longer oil change service intervalsSpecifications: ACEA C3, API SN, CFRecommendations: BMW Longlife-04,…

Millers Oils Trident Professional C2 / C3 5W30 is a fully synthetic engine oil suitable for the latest engine technology for use in petrol, diesel and hybrid engines. Formulated to provide engine cleanliness and durability which will reduced emissions, extends drain intervals and will also improve fuel economy. Millers stop start technology will deliver instant protection under hot and cold conditions, protecting your engine each and every time it stop starts.Excellent flow properties when cold to protect engine components on first start upProvides instant protection in hot or cold conditions, ideal for vehicles with stop startMid SAPS technology protects DPFs and controls soot build

Millers Oils Trident 5w40 is a full synthetic engine oil. Fully synthetic engine oils offer better viscosity under all conditions especially extreme temperatures (e.g. Cold starts). Fully synthetic oils reduce sludgeing, oil burnoff and the potential for oil passageway clogging all of which can damage your engine. Millers Oils Trident 5W40 is recommended for use in current and late model petrol and diesel cars where this type of advanced engine oil is called for by the manufacturer, especially modern high performance vehicles. It is also ideal for turbocharged engines.Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its componentsProvides easy starting …

Millers Oils EE Performance ECO 5W30 is a fully synthetic engine oil featuring 'Nanodrive' technology which hugely reduces engine friction by up to 24% and providing a reduction in wear of up to 25% when compared to other fully synthetic oils. Designed for vehicles which require a A5/B5 or A1/B1 5W30 viscosity predominantly for high power Ford, Jaguar Land Rover and Asian manufacturers. For use in petrol, diesel and hybrid engines.Improves fuel economy by lowering friction within the engineExcellent wear protection increases component lifeReduces emissionsReduction in friction of up to 24% providing a reduction in wear of up to 25%The Millers Oils EE Performance ECO 5W30 is a track ready

Millers Oils EE Performance C3 5W40 is a fully synthetic engine oil featuring 'Nanodrive' technology which hugely reduces engine friction by up to 24% and providing a reduction in wear of up to 25% when compared to other fully synthetic oils. Designed for vehicles which require a C3 5W40 viscosity targeting PD Volkswagen Audi Group (VAG) engines including Lamborghini, Seat, Skoda and Porsche. For use in petrol, diesel and hybrid engines.Improves fuel economy by lowering friction within the engineExcellent wear protection increases component lifeReduces emissionsReduction in friction of up to 24% providing a reduction in wear of up to 25%The Millers Oils EE Performance C3 5W40 utilises the