Powerline Adapters

Connect two LC fiber cables or establish fiber connectivity on a keystone patch panel

Connect two LC Duplex fiber cables featuring UPC polished ends to extend a network connection using this LC to LC Keystone Coupler. The female to female fiber coupler maintains optimal signal integrity while achieving low insertion loss that exceeds industry standards.

Compatible with Single Mode and Multimode Fiber Cables

The LC Fiber Coupler supports Single Mode and Multimode LC/LC fiber cables. It is compatible with OS1/OS2 (9/125m) and OM1/OM2/OM3/OM4/OM5 (62.5/125m and 50/125m) fiber core/cladding. The coupler fits securely into the keystone jack which can be installed in a keystone patch panel …

Digitus LC / LC Coupler, Singlemode

Digitus LC / LC Coupler, Multimode

Ubiquiti INS-8023AF-I PoE adapter 18 V

Intellinet Gigabit Ultra PoE+ Injector, 1 x 60 W Port, IEEE 802.3bt and IEEE 802.3at/af Compliant, Plastic Housing (UK Power Cord)

LevelOne Gigabit PoE Injector, 802.3at/af PoE, 30W

LevelOne Gigabit PoE Injector, 30W

Intellinet Gigabit High-Power PoE+ Injector, 1 x 30 W, IEEE 802.3at/af Power over Ethernet (PoE+/PoE) (UK Power Cord)

Extend the range of a PoE connection!

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater Model 560962 is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply as it draws the power it needs from the PoE input.

Simple Installation
Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect; e.g. a VoIP phone or a PoE network camera. That's it. There is nothing to …

Digitus Gigabit Ethernet PoE Ultra Injector, 802.3af/at, 60 W

Digitus Gigabit Ethernet PoE splitter, 802.3bt, 51 W

Digitus Gigabit Ethernet PoE+ Splitter, 802.3at, 24 W

Digitus Gigabit Ethernet PoE+ Repeater, 802.3at, 22 W

Digitus Gigabit Ethernet PoE+ injector, 802.3at, 30 W

Digitus Gigabit Ethernet PoE Injector, 802.3af, 15,4 W

Digitus Gigabit Active 802.3af PoE Midspan

Digitus FTTH Outdoor Distribution Box for 2 SC/SX or LC/DX couplers

Digitus FTTH Outdoor Distribution Box for 24 LC/Duplex, SC/ Simplex couplers

Digitus Fiber Optic Outdoor Distribution Box, 8x SC SX

Equip Fiber Optic Keystone Adapter, LC Duplex

D-Link's DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This …

The LC Multimode adaptor is used to join two connectors together and is usually mounted in a fibre optic patch panel fibre optic breakout box and more recently in fibre optic wall outlets where a fast fibre link is required in an office environment.

The adaptors are supplied in Duplex or Quad versions.

By using high quality adapters this ensures that both ferrules are perfectly aligned and thus minimising losses.

The LC adaptor is a proven small form factor design enabling a greater number of fibre ports where space is limited.

The LC Singlemode adaptor is used to join two connectors together and is usually mounted in a fibre optic patch panel fibre optic breakout box and more recently in fibre optic wall outlets where a fast fibre link is required in an office environment.

The adaptors are supplied in Duplex or Quad versions.

By using high quality adapters this ensures that both ferrules are perfectly aligned and thus minimising losses.

The LC adaptor is a proven small form factor design enabling a greater number of fibre ports where space is limited.

The LC Multimode adaptor is used to join two connectors together and is usually mounted in a fibre optic patch panel fibre optic breakout box and more recently in fibre optic wall outlets where a fast fibre link is required in an office environment.

The adaptors are supplied in Duplex or Quad versions.

By using high quality adapters this ensures that both ferrules are perfectly aligned and thus minimising losses.

The LC adaptor is a proven small form factor design enabling a greater number of fibre ports where space is limited.