Amplifiers

*ESS Sabre ES9068x2 DAC chip, RT 6863 x6 OPA chips,supporting up to DSD512 Native, PCM768 KHz@32Bit decoding. Optical, Coaxial and USB support MQA full decoding and rendering.
*Qualcomm QCC5125 Bluetooth 5.0 module supports SBC/AAC/aptX/aptX LL/aptX HD protocol.
*6.35mm single-ended Headphone amp output, driving 16-300 ohm headphones.
*The total harmonic distortion ratiowhich has been measured is -120dB (0.00009%), signal-to-noise ratio and dynamic range are 125dB.
*3-inch LCD screen, control knob and EverSolo mobile controller app is available for easy control.

PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card…

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Power Supply: 48V Phantom
Battery Operation: Yes
Made in: Germany
UK/EU Power supply included: No

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China

The PRE-73 is a vintage-voiced preamp from the new Premier range of Golden Age recording equipment. The Premier line features top quality components and design whilst delivering excellent value for money. SoundGolden Age Premier have constructed the PRE-73 in line with their brief; retro-style circuitry made with discrete components. The PRE-73 captures the classic sweet, punchy and musical characteristics heard on countless old school records. An adjustable high pass filter, high frequency air EQ boost and output drive makes the PRE-73 gives you plenty of room to experiement. The Premier range is kitted out with polystyrene and tantalum capacitors, and gold-plated contacts for all switches.…

FiiO BTR7 is designed with a complete audio architecture consisting of a premium Dual DAC chipset with a Low-pass filter and dual THX amplifier chips. It can easily compete against a premium HiFi player with its excellently detailed and precise sound performance. FiiO BTR7 is designed with dual Sabre DAC chipsets. It houses two ES9219C DAC chips from ESS Sabre Technologies. Supported by the latest XMOS XU208 8-core USB controller chipset, the BTR7 can also be used as a high-resolution USB DAC/AMP. It handles native 32-Bit/384kHz PCM signal decoding. Fiio has features Qualcomm’s latest QCC5124 Bluetooth chipset on the latest BTR7. It delivers impressive Bluetooth connectivity with ultra-low …

Mighty 8BT mkII is part of the new generation of Mighty amplifiers from NU-X, bringing cutting edge modelling and programming flexibility to the practice amplifier format. Powered by the included 12V power adaptor or alternatively using 8 x AA size batteries for portable operation. The uncomplicated input section deceptively borrows from the cutting edge Mighty Plug series to deliver 7 programmable preset sounds, which are accessible using a single channel select button. Choose from a wide palette of amplifier models with preset IR (impulse response) speaker cabinet models and 18 slots for user loadable IRs. Add to this a full compliment of modulation, delay and reverb effects, which can be …

Styled after the iconic Laney Lionheart range, the Laney Ministack is a small amp with a big sound, Bluetooth enabled and perfect for anywhere in the house, backstage or practice. The Ministack-B-Lion model features a clean & drive channel, gain, tone and volume dial, guitar input, Aux in, On-board tape style digital delay with level control, headphone socket and the unique Laney LSI – Laney Smartphone Insert. The LSI allows you to connect your amp to your favourite guitar tone generating app to access all your favourite guitar tones.
MIDI Interface: No
Inputs: Jack 6,3 mm TS
Power Supply: 12V;Adapter;Battery
Outputs: Headphones 3,5mm TRS
Effect Types: Delay
Width (mm): 205.0
Depth (mm): …

Immersive acoustic experience and wide sound range thanks to a 10-watt stereo amplifier with two 5-inch double cone speakers. Five selectable AIR FEEL options offer a natural resonant sound with any acoustic guitar pickup. The combo has a guitar input with AIR FEEL, three-band EQ, and reverb/chorus effects, a microphone input with phantom power, two-band EQ and independent reverb, built-in 15 organic rhythm patterns that can be expanded to 119 using a dedicated jamming editor application, as well as a built-in looper. It also includes a line output for a PA mixer or for recording at home with AIR FEEL sound. The USB Audio interface with loopback is ideal for recording or live broadcasting. Power …

Speaker switch box for connecting up to 2 pairs of speakers (4-8 Ω) in any combination to 1 stereo amplifier output.
Power Supply: Passive
Headphone Output: No
Height (cm): 5.0
Depth (cm): 10.0
Type: Speaker Switch Box;Desktop
Inputs: Spring-load speaker terminal
Width (cm): 17.6
Made in: Taiwan
Controls: Switch
Outputs: Spring-load speaker terminal
Net Weight (kg): 0.43
USB: No
UK/EU Power supply included: No

At the heart of the ISA range is the microphone preamplifier with its Lundahl input transformer — essentially the same circuit, based on the original ISA110, that has been used for 30 years in successive Focusrite designs. The input transformer imparts a special character to the sound that can't be truly emulated in any other way: inseparable from the microphone itself, the transformer input stage is ideal for use with classic microphones. But this mic pre has a twist the original didn't have, which makes it far more versatile: four carefully-selected impedances allow you to match microphone to input in different ways. Bring out the character of a classic mic or emphasise a special feature, o…