Amplifiers

The BOSS BAS-1 Amplifier Stand cradles your favorite combo guitar amp at the perfect angle for monitoring and sound projection, whether at home, on stage, or in the studio. Constructed with heavy-duty steel for long-lasting durability, the BAS-1 features an adjustable tilt-back design and a telescoping support arm that accommodates a variety of cabinet widths. The stand collapses for easy travel, with a locking cam and quick-release lever for fast set up and tear down. And with adjustable feet, you can achieve wobble-free stability when using the BAS-1 on slightly uneven surfaces.
Load Capacity: 21 kg
Weight: 4,1 kg
Depth (cm): 44.5
Width (cm): 69.4
Package Contents: Manual
Made in: China
Colour: …

Lindy TosLink (Optical) and Coaxial Bi-directional Converter

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolated. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to monitor the input level, headphone volume adjustable. Individual ground lift. switches for each output. Ground Lift switch for the input. Expandable setup thanks to the Bus In/Out sockets. Dimensions: 480 x 165 x 44.5 mm (19" x 1 U). Weight: 4.18 kg. In a black finish.
Type: Isolator;Splitter
Made in: Germany
UK/EU Power supply included: Yes
Power Supply: 240V

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Number of Outputs: 4
Made in: China
Number of Input Port…

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass roll-off filter. Connectors are standard XLR-m to mini XLR-m. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China

✅ SUPERIOR ENGINEERING - Extremely low distortion and noise from a circuit design inspired by our flagship headphone amp which uses a dedicated input stage that level matches to your source, allowing the signal to flow freely through the Class A output stage, literally music to your ears
✅ POWER REALIZED - Maximize the performance of your headphones, more than just getting loud, but realizing the full dynamic range of the drivers and experiencing soft vocals as well as heart pounding drums, never missing a beat. Delivers up to 1890mW of power at 64 ohms
✅ IMMERSIVE SOUND - Enhanced with our signature analogue signal processing to deliver accurate and more natural bass frequencies through XSpace…

PLX2000 power amplifier, 2 x 700W @ 4 Ohms19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationOutput stable down to 2 OhmsRemovable handles for low profile installSwitchable clip limiterPower rms @ 2 Ohms - 2 x 1000WPower rms @ 4 Ohms - 2 x 700WPower rms @ 8 Ohms - 2 x 400WPower rms bridge @ 4 Ohms - 1700WPower rms bridge @ 8 Ohms - 1250WWeight …

The Harmony V100 Acoustic Amplifier is crammed full of features and innovations that can help you weave intricate, evolving sounds at home or in clubs and halls. Maximize your audio potential to capture attention and hold it with an array of fascinating vocal and guitar effects and looping in an easy-to-carry processor and amplifier system. Leave your pedals at home. A suite of sweet guitar effects that would normally require a large pedal board is included. There’s a fast, accurate Tuner, BodyRez to improve the feel and tone of your undersaddle pickup, 3 band EQ and separate Chorus, Reverb and Echo with their own styles and mix controls. All you add is a guitar and your groove. Everybody …

Focusrite Scarlett OctoPre is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. The second generation of microphone preamps operates at 24 bit / 192 kHz and offers a dynamic range of up to 109 dB. Two analog inputs located on the front panel are capable of handling microphone, line or direct instrument (Hi-Z) signals. OctoPre is the ideal studio accessory for extending the connectivity of Scarlett Sound Cards and other ADAT-enabled devices. The converter is designed for rack installation, where it occupies one height unit.

The Scarlett OctoPre features eight analogue inputs with combined XLR / TRS connectors. Each input channel has a volume control and …

DI Box / Desktop / Number of Channels 2

Today, many amplifiers do not have a specific phono cartridge input. Phono Box is an ideal phono preamplifier for these hifi system and accepts both MM and MC cartridges. The analogue output of Phono Box can easily be connected to a line-input (AUX,…) of your amplifier.
UK/EU Power supply included: Yes
Original Colour by Producer: Silver;Silver
Colour: Silver
Made in: Czech Republic
USB: No
Bluetooth: No
RIAA-Equalisation Curve Accuracy: 0.5 dB / 20 Hz - 20 kHz
Width (cm): 10.3
Weight: 570 g
Type: Phono Preamplifier
Power Supply: Adapter
Package Contents: Adapter
THD: 0.01%
Inputs: RCA
Gain: 40 dB;60 dB
Controls: MM/MC Switch
Input Impedance: 47 kOhm
Depth (cm): 10.4
Outputs: RCA
Height …