Amplifiers

SMSL A200 uses 2 pieces of Infineon's new Silicon Carbide digital power amplifier chips, which provide higher quality and up to 92% efficiency, further reducing energy consumption. Support Bluetooth, optical, coaxial, HDMI audio, USB, line input. new Bluetooth 5.0 technology, both low power consumption and high sound quality. Support HDMI (ARC) audio return function, used to connect to the HDMI interface of the TV, to achieve the output of the TV audio. electronic volume control, eliminating the potentiometer volume adjustment when the noise. Optical support up to 24bit/192kHz signal input. With sound effects adjustment, high and low sound individually adjustable. With pop sound control circuit,…

SMSL DP5 Player: The ES9038PRO flagship DAC chip stands out with its ultra-low THD+N of 0.00015%, ensuring exceptional audio quality. It also offers a high dynamic range of 130dB, providing a wide range of sound reproduction. Additionally, it comes with a built-in high-efficiency, low-noise switching power supply that ensures stable power delivery and minimal noise interference. USB Performance: The USB audio processor supports up to 32bit/384kHz playback, offering the highest audio quality possible. It also fully supports MQA hardware decoding for both local playback and USB DACs. This allows for seamless playback of MQA-encoded audio files without any compatibility issues. The USB

Integrated Amplifier / Stereo / Output power per channel 25 Watt / 3.5mm-In / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N

Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30. With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Max output power: 3500mW x@16Ω, 540mW x@300Ω L50 adopts the New NFCA circuit. L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

RM244V Mixer-amp with 4-zone paging240W mixer-amplifier with 3 mic/line inputs, 1 aux input and a built-in media player. Connections for mic/line inputs are jack or XLR and channel 1 input has a variable mute for priority override. 24V contacts can be connected to a fire alarm panel for emergency evacuation if required. The media section can provide playback from Bluetooth, USB/SD media or an FM tuner. Output terminals are provided for 4 zones which share the output of the 240W amplifier, governed by 4 individual rotary volume switches on the front panel. RJ45 inputs on the rear panel allow connection for up to two CS4 call stations to enable paging to individual or all zones. The RM244V offers …

The Topping PA5 MKII Class D Power Amplifier adopts a fully balanced structure ensuring a clean powerful audio output. It can deliver up to 65W at eight ohms (THD+N

Dual channel level converter. The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied. Frequency response: 20 Hz - 20 kHz. Comes with external power supply. Dimensions: 47 x 117 x 109 mm. Weight: 0,5 kg. Made in: China

JBL Mobile Club1KW Mono Subwoofer 1000w Amplifier

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

Power Amplifier / Total Connected Load 2,400 W / Number of Channels 2

AK4493S: The DX1 uses newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Plug and play turn your PC into a HIFI source: DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. Supports amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables. Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with 2 amplifiers. Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure hold. Sound: Due to the increased cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system. Quality: The AMP-S Pro has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.