Boat Motors

UV resistant vinyl Color is black Custom fit with all-weather, corrosion-resistant zipper

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resi more→stant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with 1/4", short shank padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater

For small boat, transom applications (boats that do not have battery compartments) Allows trolling motor leads and charger leads to be connected without opening the box. Built-in battery meter inclu more→des two 12-volt accessory plugs, and 2 manual reset circuit breakers Displays current "state of charge". Fits group 24- and 27-size batteries.

UV resistant vinyl Color is black Custom fit with all-weather, corrosion-resistant zipper

Compatible with 10 foot Minn Kota Raptor models only. UV resistant vinyl All-weather, corrosion-resistant zipper Not intended for use while on the water 1 Year Limited Manufacturer Warranty

Reduces motor bounce in the stowed position Absorb vibrations to protect motor shaft Folds down when not in use Multiple mounting orientations to fit your boat configuration Easily removeable, lea more→ves only a low profile base Stabilizer shaft can be cut to fit Multi-position strap adjusts to accommodate all shaft sizes Includes Stainless steel mounting hardware Compatible with QUEST series RT Instinct, Ulterra, RT Terrova, Terrova and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon

New Minn Kota Outdoor & sports, Boating 29797971

See description below for full features and details!

Increases effect of lift-assist for motors equipped with both Humminbird MEGA Live Imaging TargetLock as well as Humminbird MEGA 360 Imaging Reduces effort required for motor stow and deploy Replace more→s factory standard lift assist cylinder Designed for 36V, 112lb Ultrex motors with a shaft length of 45” Compatible only with Advanced GPS enabled Ultrex motors manufactured in 2023 or later. To increase the affect of lift assist for i-pilot or i-Pilot Link Ultrex motor models manufactured prior to 2023, a MEGA Live TargetLock and MEGA 360 Ultrex Accessory Mount is required. These models will not accept an updated lift assist cylinder only. One-Year Warranty

Allows trolling motor to be quickly removed from and reattached to boat deck Sidescrew design attaches trolling motor to top bracket and slides into deck-mounted bottom bracket, secured with tighteni more→ng screw Solid, anodized aluminum construction Includes mounting hardware Brackets can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 Designed for use in freshwater

Minn Kota Mkr-us2-11 U.sonar 2 Ext Cable 1852080 one size

Provides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors Lightweight, single-piece aluminum construction for superior str more→ength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty

SKU: 87-815200A1 Sold Each Please verify your own fitment

Mercury 339-832757A 4 1994-2006 6-225 Hp

Increases effect of lift-assist for motors equipped with both Humminbird MEGA Live Imaging TargetLock as well as Humminbird MEGA 360 Imaging Reduces effort required for motor stow and deploy Replace more→s factory standard lift assist cylinder Designed for 24V, 80lb Ultrex motors with a shaft length of 45” Compatible only with Advanced GPS enabled Ultrex motors manufactured in 2023 or later. To increase the affect of lift assist for i-pilot or i-Pilot Link Ultrex motor models manufactured prior to 2023, a MEGA Live TargetLock and MEGA 360 Ultrex Accessory Mount is required. These models will not accept an updated lift assist cylinder only. One-Year Warranty

HUB SPAN 4" BLADE HEIGHT 11" HUB SIZE 2-3/8" SHAFT 1/2"

Minn Kota Trolling Motor Plug Receptacle

Minn-Kota JohnsonOutdoors Digital Battery Meter 1820087

Increases effect of lift-assist for motors equipped with both Humminbird MEGA Live Imaging TargetLock as well as Humminbird MEGA 360 Imaging Reduces effort required for motor stow and deploy Replace more→s factory standard lift assist cylinder Designed for 24V, 80lb or 36V, 112lb Ultrex motors with a shaft length of 52” Compatible only with Advanced GPS enabled Ultrex motors manufactured in 2023 or later. To increase the affect of lift assist for i-pilot or i-Pilot Link Ultrex motor models manufactured prior to 2023, a MEGA Live TargetLock and MEGA 360 Ultrex Accessory Mount is required. These models will not accept an updated lift assist cylinder only. One-Year Warranty

Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight in more→dicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30' lead length.Compatible with QUEST series Ulterra, Terrova, Riptide Terrova and Riptide Instinct motors