Amplifiers

TOA Black A-2120 120W 100V Line Amplifier The TOA Black A-2120 120W 100V Line Amplifier is a cost effective and durable mixer amplifier. The product features priority override on mic 1 with 30dB, atte more→nuation, current limiter circuitry, thermal protection circuitry, 3 Mic inputs, 2 Aux inputs, plus one recording output, independent input volume controls, master volume control, independent tone control for both high & low frequencies. Technical specification: Colour - Black Dimensions (mm) - 262x103x420 Weight (kg) - 10 DC Input (V) - 24 Power Input - 230Vac@50HZ Power RMS (W) - 120 Frequency Response (Hz) - 100-10000 Outputs - 4 Ohm, 70 & 100V

Class-d amplifier providing 50 watts/channel (RMS) into 8ohm loads or 65 watts/channel into 4ohm loads. Bridgeable output provides 120 watts into a single 8ohm load 4 pole detachable speaker screw co more→nnector (Phoenix connector) with support for up to 12AWG speaker wire. 12-volt trigger input for power-on/off. 12-volt trigger output for controlling other devices. Buffered loop output of original signal for connecting additional amplifiers Rear panel volume gain adjustment. Built-in thermal and short circuit protection circuits Includes rack-mount ears for mounting a single amp or two amps side-by-side

Slimline PA power mono amplifier from Monacor. This professional 100V PA amplifier is designed for small-medium scale PA systems where reliable amplification is required over a long speaker line; such more→as schools, colleges, supermarkets, factories, warehouses, etc. Designed to be installed into a 19" rack (2U) cabinet or case, but can also be free-standing on a desktop counter or desk, etc. Rackmountable: Yes UK/EU Power supply included: No Battery Operation: No Weight: 3,5 kg Power (Watt): 120.0 Made in: China Power Supply: 240V

700W Amplifer at 4ohm's with built in LCD Screen, great sound, deep bass and clear reproduction of high frequencies. 2 Mode options, Stereo or Bridged. Features: LCD for temperature, operating mod more→e, power 2 operating modes can be selected (stereo or bridge) Limiter function can be switched on additionally Temperature-controlled fan 2 level controls Ground lift function Speaker switch-on delay Protective circuit with LED indication for protection against short circuit and overheating LEDs for each channel for indicating overload, level and signal Technical Data: Output Power (RMS Power): Stereo 4Ω: 2 x 350WRMS Stereo 8Ω: 2 x 250WRMS 8Ω bridge operation: 1 x 700WRMS Max.…

Integrated Amplifier / Stereo / Output power per channel 25 Watt / 3.5mm-In / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

PA1200M Monitor Unit With 10 Monitor Channels & 1 AUX The PA1200M Monitor Unit With 10 Monitor Channels & 1 AUX input. The audio source can be selected via a rotary switch for ease of use. Integrated more→2w speaker system and volume control for ease of use. Features: Audio sources can be selected via rotary switch 10 monitor inputs 1-100V/10k ohms 1 aux input 0dB (0.775V)/600 ohms Level control, LED VU meter and clip LED for each monitor input Integrated 2W speaker & volume control Mains operation or 24V emergency power operation Headphone output - >- 8ohms, 0.1W Frequency range - 100-20,000Hz THD - < 0.3% Power supply - 230V~/50Hz/15VA or 24V DC current /0.5A Dimensions - 482x88x200mm, 2RS Weight - 4.7kg&hellip;

Premium ultra-low noise, high headroom analog mixer Four state-of-the-art, phantom-powered xenyx mic preamps comparable to stand-alone boutique preamps Four studio-grade compressors with super-easy more→"one-knob" functionality and control led for professional vocal and instrumental sound Neo-classic "british" three- band eqs for warm and musical sound contemporary studio-grade fx processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, tap function and storable user parameter settings

PA-900 Mono PA Mixing Amplifier 1 Channel x 120WRMS The PA-900 Mono PA Mixing Amplifier 1 Channel features an insert facility for pre-amplifier, an additional connection for a desk microphone via scre more→w, and microphone with priority circuit and automatic talkover. Features: 1 x 120WRMS 4 balanced mic/line inputs Mic 1 with priority circuit and automatic talkover Additional connection for desk microphone via screw terminal 1 aux input Speaker outputs via screw terminals Line output Insert facility for pre-amplifier Input and output level controls 2-way tone control for the output 21V phantom power, selectable Mains operation or 24V emergency power operation Technical specification: Output …

Australian Monitor AMIS120 120W Mixer Amplifier 100v The AMIS120 has been the most successful and reliable amplifier in the Australian Monitor Installation Series for over 6 years. We have now made ou more→r most popular amplifiers even more contractor friendly with the addition of two extra balanced XLR mic/dual RCA line inputs. The AMIS120 still boasts the same reliability and an excellent feature set, including vox muting on channels 1 and 2 (defeatable), Bell, Pre Announce, Evac and Alert tones on board, Vox triggered output relay, VCA master level control, 15 VDC phantom power and mains or 24DVC operation. Now with more inputs available they offer even greater flexibility for commercial audio

W Audio EPX 1200 Power Amplifier W Audio have designed the EPX Series power amplifiers to work perfectly with most loudspeaker systems. These power amplifiers feature several power outputs all with ex more→tended reliability and superior stability for a wide range of applications. Features: 2 x 400Wrms @ 8Ω 2 x 600Wrms @ 4Ω Bridge 1200Wrms @ 8Ω Frequency response: 20Hz to 20kHz Input sensitivity: 0.775V / 1.0V / 1.44V Protection circuits: Soft start, limit, thermal, short circuit, overload, DC fault protection, AC power supply fuse and circuit breaker LED indicators: Power, protect, clip, stereo, parallel and bridge Input connections: 2 x XLR sockets, 2 x 1/4” jack sockets, 1 x powerCON m…