Amplifiers

TOA A-2030DD audio amplifier 1.0 channels Performance/stage Black

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

Omnitronic EPA-100BT 2 x 50W Amp With Bluetooth Omnitronic 19" mixing amplifier with audio player, Bluetooth and 2 x 50 W power Features: Built-in audio player with USB port and SD card slot Integrated Bluetooth audio streaming Adjustable stereo line input via XLR and RCA jacks Adjustable microphone input on the front panel Controls for volume, bass and treble Signal, clip and power indicators Stereo line output via XLR and RCA jacks Screw terminals for low-impedance speakers Ground lift switch against humming Limiter for overload protection Efficient Class D technology Extremely low weight and height due to integrated switch mode power supply The device is cooled by cooling fan Monochrome

1U Multipurpose Zone Mixer 1-4 Zones The 1U Multipurpose Zone Mixer 1-4 Zones (Z44R) is very versatile. It can be used to make a 6 in 4 Out Mixer allowing you to combine up to 2 Mic Channels and 2 Line Inputs. The Mic inputs go to all zones/outputs. The Line inputs can be switched to any required zone. Applications vary from additional vocal mixing for DJ set-ups to multi-room zoning for venues and many other scenarios. Features: Switchable 48V phantom power Low-cut rumble filter for mic channels 3-band EQ for mic channels 2-band EQ for stereo channels Foot-switchable internal DSP reverb or external FX 4 stereo zone outputs with level controls Technical specifications: Power supply 240Vac,…

Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30. With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Max output power: 3500mW x@16Ω, 540mW x@300Ω L50 adopts the New NFCA circuit. L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.

Vivolink VL120004 audio amplifier 2.0 channels Home Black

Bluetooth 5.1 High-end Chip QCC5125:Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C,Supports TRS Balanced Output.

Bluetooth 5.1 High-end Chip QCC5125：Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C. Supports TRS Balanced Output. Support DSD Direct.

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz 4x high-end dual op-amp OPA1612 and a large number of audio grade components All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64 Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC. The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz. 4x high-end dual op-amp OPA1612 and a large number of audio grade components. All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.

4-Port Insertion Module Extension Unit The 4-Port Insertion Module Extension Unit can be operated of the mains or by a 24V battery. A XLR connector offers professional level quality and performance for your audio system. Features: For accepting up to 4 insertion modules (as found in our Amplifier Modules section), 2 max. with CD player mechanism Opening for using insertions with radio receiving module XLR connections 482mm (19') rack installation with fitted mounting brackets Mains operation or 24V battery operation Dimensions without brackets (WxHxD) - 425x135x380mm, 3RS Weight - 7.7kg Power supply - 230V~/50Hz/55VA or 24V DC current / 2A

A14 Dual Stereo Mixer-Amplifier 4 x 100WComprehensive 1U PA amplifier with 2 independent stereo zones and a global microphone input. Each zone has an independent audio player module which can select between USB / microSD mp3 player, FM tuner, Bluetooth receiver, 2 stereo line inputs (rear panel RCA) and another line input on the front panel (3.5mm). Playback can be controlled from the front panel or by the supplied I.R. remote control handsets. In addition, each player has an Aux 4 setting allowing it to connect to the other player module, meaning either one of these players can be used for both zones if needed. Mic inputs 1 and 2 are live to both output zones at all times. 2 pairs of speaker …

Q1000 power amplifier 2 x 500WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T5A (240V) / T10A (110V)Power max. : 4 Ohms - 2 x 500WPower rms : 4 Ohms - 2 x 250WPower rms : 8 Ohms - 2 x 160WDimensions - 482 x 380 x 88mm (2U)Weight - 9kg

Two-channel amplifier with a power of 2 x 50 W with practical dimensions of 19 x 28 cm. Thoughtful simple solution, ideal for schools, conference rooms, bars and restaurants. Thanks to its sound qualities, it will also appeal to a number of beginning Hi-Fi fans. There are two multifunctional controls on the front panel and a backlit display is located under the black acrylic. In the active state, the display subtly illuminates the black area, in the off state, the forehead is pure black, or with a light point indicating the standby mode. The aluminum bottom of the casing is also a heat sink that dissipates heat from electrical circuits. The internal power supply is provided by a powerful toroidal …

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the