Amplifiers

Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Bluetooth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel

Aluminum alloy CNC machining process： Using anodizing technology, fine workmanship, Good touch! Qualcomm Bluetooth 5.0 receiver, support APT-X：Better sound quality, longer transmission distance! APT-X Lossless music transfer： Low latency, good fault tolerance, high sound quality! Powerful bass pre- amp output： The output is adjustable from -30~+10dB, used to connect with a far- subwoofer speaker to form a 2.1 audio system! 2 separate high-power digital power amplifier chips 230W×2（4Ω） ：Use two separate digital power amplifier chips, output 230W per channel at 4 ohms, easy to drive most speakers! Electronic volume control chip NJW1195： Japan's NJRC company electronic

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Features: 1¡¢The waterproof 4 pole speaker plug jacket is suitable for cables with a diameter of 6~15mm, which is fully in line with the industry standard for speaker connection 2¡¢Humanized locking design with chuck type stress release, accurate and reliable twist lock latch system is easy to operate 3¡¢The speaker plug has an extremely reliable and sturdy cable connector with a reliable locking system 4¡¢The product contact with the screw terminals firmly, including multi strand protection, and solder terminals 5¡¢The audio connector has a continuous rated power of 30A rms, nickel plated brass contacts possess good electrical conductivity, reliable connection, used in plug ins and shells to …

The JBL MA710 8K AV Receiver is designed for 7.2 channel speaker systems making it an ideal centrepiece for a high-end home cinema. The Class D amplifier delivers low-noise powerful sound at 110W per channel at eight ohms enhancing films and TV shows. Enjoy a multi-dimensional soundstage with Dolby Atmos and DTS decoding bringing cinema magic to your living room. The MA710 includes six HDMI inputs three for 8K/60Hz and three for 4K/120Hz while the eARC output supports high-quality audio and visuals from your TV Blu-ray player and game console. The built-in 192kHz/24-bit DAC supports various digital audio formats enhancing your favourite songs. Like all models in the MA series this receiver …

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC. The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz. 4x high-end dual op-amp OPA1612 and a large number of audio grade components. All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

It's all about gain and impedance. While some of the best sounding microphones out there are low-output dynamics and ribbons, pre-amplification can be challenging due to the gain and impedance requirements. Cloudlifters address this by giving passive microphone signals a major inline boost -up to +25db of ultra-clean gain- while properly loading the microphones' transformer for optimal performance. The Cloudlifter CL-1 is completely self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget

Four-chip decoding for superior sound：The DL100 is capable of directly sampling 32bit/768kHz PCM digital audio without down sampling. lt also supports DSD256 native DSD playback without conversion.Optical and coaxialinputs support DOP 64. Newly upgraded headphone amplification circuitry：Adopts self-developed independent amplification circuit for excellent performance. Performance compared to the previous generation of CS43131 products, the output power increase of about 16 times at 300Ω. USB Dual Mode 2.0/1.1: There are 2 different USB modes that can be switched within the menu, using USB2.0, driver installation is required to support high sample rate audio files up to 768kHz/32bit. Using USB1.…

Integrated Amplifier / Stereo / Output power per channel 50 Watt

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD player/turntable external DAC, digital broadcasting external DAC, TV DAC, and so on. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly

Phono Preamplifier / Stereo

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

Q600 Series Stereo Power Amplifiers Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers. 6.3mm jack or RCA inputs SPK, 6.3mm jack or 4mm post outputs Fan cooled 19" rack-mountable (2U) Power supply 230Vac, 50Hz (IEC) Frequency response 20Hz - 20kHz Input connectors 6.3mm jack, RCA (L+R) Input sensitivity 775mV, 10k Ohms S/N ratio >98dB …