Amplifiers

The Behringer FBQ3102HD 31-Band Stereo Graphic EQ takes the graphic equaliser into the realm of high definition audio. Thanks to high quality German engineering and the use of premium components youre presented with low noise performance. To ensure integrity across the entire frequency spectrum Behringer employed 4580 dual operational amplifiers. Youll be provided with a consistent reliable sound which you can trust. The stereo FBQ3102HD is the ultimate choice for providing the finishing touches to your mixes and live shows.

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

US Series Compact 100V Slave Amplifiers100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.DetailsPower supply 170-264Vac, 50Hz (IEC)Inputs Line (RCA),…

Q480 power amplifier 2 x 240WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T5A (240V) / T10A (110V)Power max. : 4 Ohms - 2 x 240WPower rms : 4 Ohms - 2 x 120WPower rms : 8 Ohms - 2 x 80WDimensions - 482 x 300 x 88mm (2U)Weight - 6.45kg

enhancer, de-esser, compressor and expander-gate. dimensions: 19"/1U
Made in: China
Phantom Power: Yes

Jaw-dropping, room-filling sound with advanced acoustics powered by computational audio. Seamless integration with Spark App. Bluetooth speaker, audio interface, rechargeable battery and headphone/line out.Play whenever and wherever you feel like it with this app-supercharged tiny beast. We’re talking seamless integration with the Spark App chock full of amps, pedals, Auto Chords, Smart Jam, 50,000 tones on the cloud, and so much more.It’s easy to create your own tones, or download over 50,000 tones from the ToneCloud community. Get chords for millions of songs. Use AI-powered Smart Jam to learn and jam along with you, and much more. Spark GO comes stocked with 33 amps and 43 effects …

Hybrid tube stereo Hifi amplifier with built-in USB MP3 player and Bluetooth module. It also contains a 2 line stereo inputs. Electron tubes produce clearer and warmer sound than modern transistors. Includes bass, treble (+/- 10dB) corrections, overall volume and input switch: CD, Bluetooth / USB, DVD.
Input impedance: 47kOhm
Input sensitivity: 300mV
Signal to noise ratio:> 80 dB
Harmonic distortion:

The Klark Teknik DN200 V2 2-Channel Active DI Box accurately reproduces the character of electric and acoustic instruments and allows you to send them directly to your desk or mixer. The original DN100 has been a staple of the live industry for many years now this updated version builds on its impeccable reputation. Specifically intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles this provides a significantly higher clipping threshold than many other active DI Boxes providing +10 dBu output into a 2 kOhm load. You can even phantom power each channel independently for true reliability. Its important your live equipment is able to handle …

The sE Electronics DM2 TNT Active Inline Preamp is a premium-quality preamplifier designed to improve the performance of your passive microphone collection. Designed for a wide variety of applications whether youre a studio engineer live sound engineer musician or podcaster the DM2 TNT delivers clean consistent and accurate gain to boost the level of your microphone and improve its performance for cleaner recordings. Featuring a switchable gain level from +15dB to +30dB you can add a tremendous level of input gain to your passive microphones and with the state of the art Class-A design and electronics this is all done without adding any noise or colouration to your signal. Designed with an …

Love performing live? Then plug in and play like a pro. The Radial ProDI Passive DI Box ensures the best sound possible. With a high-performance transformer on board you get pristine signal integrity for your guitars and other line level instruments. No unwanted noise. Just great sound. The ProDI eliminates buzzing from ground loops so youll always get the clearest sound. And with a -15dB pad at hand youll never have to worry about distortion when plugging in your high output instruments Perfect for any setup. Thanks to its robust compact construction the ProDI can be introduced into the tightest of stage or studio spaces. Never worry about knocks and drops getting in the way of your performance.…

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables.
Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with 2 amplifiers.
Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure hold.
Sound: Due to the increased cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system.
Quality: The AMP-S Pro has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.

stereo link, 19", Compressor-Ratio "1:1 - 1, -10/+4dB switchable, automatic attack and release, XLR ins/outs, Over Easy function, 1U
UK/EU Power supply included: Yes
Made in: China
Power Supply: 240V
Type: Digital Signal Processor