Amplifiers

The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electr more→ic and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating …

The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are more→best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4 "" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion …

FiiO BTR7 is designed with a complete audio architecture consisting of a premium Dual DAC chipset with a Low-pass filter and dual THX amplifier chips. It can easily compete against a premium HiFi play more→er with its excellently detailed and precise sound performance. FiiO BTR7 is designed with dual Sabre DAC chipsets. It houses two ES9219C DAC chips from ESS Sabre Technologies. Supported by the latest XMOS XU208 8-core USB controller chipset, the BTR7 can also be used as a high-resolution USB DAC/AMP. It handles native 32-Bit/384kHz PCM signal decoding. Fiio has features Qualcomm’s latest QCC5124 Bluetooth chipset on the latest BTR7. It delivers impressive Bluetooth connectivity with ultra-low …

The Teac CG-10M-A Master Clock Generator provides an extremely precise clock signal that optimizes the performance of digital-analog converters. It proves particularly strong with ultra-high sampling more→rate HiRes files such as DSD 22.5MHz or PCM 768kHz.
HIGH PRECISION QUARTZ Oscillator: The oven-controlled quartz oscillator (OCXO) in the center of the unit generates a 10MHz clock signal that offers exceptional frequency accuracy of ±0.1ppm. Ideal for high-end audio enthusiasts.
Four gold-plated BNC output sockets offer the ability to simultaneously connect up to four devices that support a 10MHz input, including USB DACs, network readers and SA-CD players.
Optimal stability: The Teac CG-10M-A m…

Microphone Pre-Amp / Desktop / Number of Channels 1

D-series Quad Power AmplifiersQuad digital power amplifier in a lightweight 1U rack-mountable format. An energy-efficient switch-mode power section and class-D amplifiication circuit delivers accurate more→power-on-demand to four independent speaker outputs. Proprietary cool guide technology provides stable temperature management for dependable operation. Each pair of output channels can be separately parallel switched or bridged as a full or part stereo amplifier configuration. For channel A, there is a switchable 120Hz low-pass filter for use with subwoofers and a channels C and D have a switchable stereo pair of 120Hz high pass filters to effectively focus power in full-range cabs operating as …

The HT-5R MK III takes the revered design from the award-winning MkII series to new heights with incredible performance, gorgeous looks and game-changing new features from improved voicings to the add more→ition of IR-based CabRig™ speaker simulator software.Valve amps sound best when cranked; the unique feel, dynamics and natural compression of a valve power stage running hot is widely considered the holy grail of guitar tone. The problem is turning your 100W valve amp up to these volumes is neither practical for yourself, nor your neighbours. HT-5R MK III, with its unique push-pull power amp, gives you this coveted valve performance at volumes suitable for home practice and recording.The HT-5R …

PLX2800 power amplifier, 2 x 1050W @ 4 Ohms

19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm more→jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.
Bridge mode for high power mono operation
Output stable down to 2 Ohms
Removable handles for low profile install
Switchable clip limiter
Power rms @ 2 Ohms - 2 x 1400W
Power rms @ 4 Ohms - 2 x 1050W
Power rms @ 8 Ohms - 2 x 600W
Power rms bridge @ 4 Ohms - 2300W
Power rms bridge …

The ART Phantom I is a phantom power supply that lets you power condenser microphones from an instant intuitive box. The sound of condenser microphones is renowned for its rich detailed quality thats more→extremely versatile. With the Phantom I you can tap into the quality of condenser microphones on stage or in the studio. With a hardy metal construction the Phantom I will power any condenser microphone you want to use no matter what the setting.