Batteries for Drones & RC models

Waterproof 320A Brushed ESC Electronic Speed Controller with 5V/3A BEC for 1/10 RC Car. Features: Bulid-in 5V/3A BEC. Small size with build-in capacitor module. Easy to set the ESC parameters with switch. Fully waterproof and dustproof, suit for all-weather condition. Automatic throttle range calibration, easy to use, especially for the novice. With low voltage cutoff protection, over heat protection, throttle signal loss protection. Three running modes: F/B, F/R and F/R/B, fits for various vehicles (F=forward, B=brake, R=reverse). Specifications: BEC output: 5V/3A Cooling fan: YES Plug: T-Plug Running modes: F/B, F/R and F/R/B Forward sustained/peak current: 30A/320A Reverse sustained/peak

Features: Made of premium metal, solid and durable. The roof rack provides extra space for the remote control car to carry small items. Make the model car look more like a real vehicle. Replacement for Axial SCX10 Jeep Wrangler 1/10 remote control car. Easy to install and remove, offering convenience for users. Specifications: Item Name: Remote Control Car Roof Rack Main Material: Metal Color: Black Suitable: Replacement for Axial SCX10 Jeep Wrangler 1/10 Remote Control Crawler Car Package Information:? Package Size: 31*21.5*1cm/12.2*8.46*0.39inch Package Weight: 485g/1.07lb Package List: 1 * Roof Rack Set

Features: Tough, aluminum exterior with protective finish Durable, lockable latches High-density foam interior Storage compartments for accessories Protective plastic feet and table pads Comfortable grip handle Suitable for Futaba JR Spektrum Walkera Esky Transmitter Convenient for outdoor carrying Package size: 36 * 28 * 14cm / 14.4 * 11.2 * 5.6 in Package weight: 1400 g / 3.08 lb Note: Transmitter is not included! Package List: 1 * High Quality Universal Transmitter Aluminum Case

This is a professional servo tester which is durable, easy to operatie, fully functional, small in volume and light in weight. The Servo tester uses intelligent MCU control to make it works very stable, and it's a necessary tool for RC users. Features: High performance-to-price ratio, combined with proprietary test algorithm, which guarantee that the test is fast and stable. G.T power tester can be powered by lipo battery through the balance charging wire adaptor or DC power supply. It is both convenient and flexible. The rolling menu toolbar makes the operation clear and easy. The function setting is easy and practical which covers most parameters that end users need. The device is

Features: Easy to use, labor saving, and easy to handle and expand the use of the trimming machine at the same time. Easy to adjust, threaded hex wrench in every corner to help you level and easily adjust the roadside plug-in. Convenient center hole bushing for aligning the router to the center of the drill hole. It is easy to use and makes the job work very well. Made of aluminum alloy countertop and plastic router insert ring, not easy to rust, suitable for long term use. Specifications: Material: Aluminum alloy + plastic ring Thickness: 9.5mm / 0.37in Internal Hole Diameter: 73mm / 2.87in Item Size: 300 * 235 * 9.5mm / 11.80 * 9.25 * 0.37in Item Weight: 1200g / 42.33oz Package Weight:

The Trailer comes with two rubber tyres made of high quality material is specially designed and manufactured for?Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car?to enjoy DIY delight. Feature: Make your RC car more vivid and attractive. Made from high quality metal, durability in use. Novel appearance, exquisite workmanship and?unimaginably perfect. Good choice for children to experience DIY delight and exercise the ability. Suit for 1/10 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car. Any problem, please contact our store without hesitation. Honor to serve you. Specifications: Item name: Trailer Car Quantity: 1pcs Main material: Metal Color: Black

The set includes a S2430 5800KV motor and a 25A ESC, which is perfectly fit for the 1/16 1/18 RC car. This motor is built from the best materials available, and is designed to provide both quality and performance at an affordable price. And it's with high quality aluminum alloy parts that are produced on the latest CNC milling machines. Additionally, the ESC Features enhanced throttle response,excellent acceleration, strong breaks and throttle linearity. Features: High-torque and high-efficiency Removable/Replaceable rotor High RPM ABEC5 oversized bearings High purity copper windings maximizes efficiency Precision balanced rotor,smoothness for best reliability and maximum RPM Super smooth

2.4G Flysky FS-iA6 6 channel remote control receiver, compatible Flysky i4 i6 i10 GT2E GT2F GT2G transmitter for model aircraft fixed wing multicopter. Features: Reliable, interference free 2.4GHz AFHDS2A signal operation. Ultra light weight design. Easy to bind and very fast link-up. 6 channel receiver compatible Flysky i4 i6 i10 GT2E GT2F GT2G transmitter. Quick and extremely stable in performance. Specifications: Channels: 6 Channels Model type: Airplane / Glider / Helicopter Frequency range: 2.4--2.48GHZ Band width number: 160 Transmitting power: not moer than 20dBm RF receiver sensitivity: -105dbm 2.4G modes: automatic frequency second generation digital systems Encoding: GFSK Antenna

Features: Special for FlySky FS-PL18 Paladin Transmitter. 5V 2.0A input, about 7h charging time. Our leading technology will change the way you charge, more convenient and easier. Complete Charging Convenience: Instantly charge your PL18 transmitter simply by placing them in the center of the charger. Never fuss around with plugging and unplugging cables again, just set down and power up. SATISFACTION GUARANTEE: If you have any questions about the product or are not satisfied with the product, please feel free to contact us and we will provide you with the best solution. Your satisfaction is our biggest concern. Specification: Brand Name: FlySky Item Name: Wireless Charger Compatibility:

The Flysky GT2E is a affordable, 2CH 2.4G radio system, with djustable steering dual-rate and servo reversing, making it a very simple setup for your car or boat. The automatic frequency hopping digital system provides a strong, reliable 2.4ghz signal, so rest assured you'll always be in control. Included in the package is a 3-channel mini receiver that will fit in most vehicles. The ergonomic feel of the trasnsmitter will feel good in your hands even after long track sessions. Features: Reliable, interference free 2.4GHz AFHDS signal operation. 2CH operation. Use only 4 * AA batteries for transmitter. Adjustable steering dual-rate. Simple binding procedure. Transmitter Specfications: RF

Features: Good performance digital?servo, suitable for remote control, RC car, robots. Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60 degrees - 0.17sec/60 degrees , peak stall torque: 29.5kg.cm - 32kg.cm. Size: 40.0*20.5*40.5mm, horn gear spline: 25T, Diameter: 5.9mm, gear type: 5 metal. A great choice for university professors and students who are interested in developing software for robot parts. Tailored for RC hobbyists to provide different experiences and delight. Warranty: If there are any problems, please contact our store in time. We will give you a satisfactory solution. Specifications: Item: Digital Servo 30KG Servo 180 Degree: Apply Environmental Conditon: 1. Storage

This product is specially developed for remote control cars and boats. It possesses super active and passive anti-jamming capabilities, very low power consumption and high receiving sensitivity. Let the beginners can control the car within limited speed range! It has a special Throttle limit switch! Features: 4CH remote control for RC cars and boats Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands It covers the entire band width of the antenna bandwidth range High receiving sensitivity. Super active and passive anti-jamming capabilities Built-in design of the antenna in the transmitter Ergonomically inclined rudder design, soft rubber handle, can relieve hand

Features: Reliable, interference-free 2.4GHz AFHDS signal operation. Easy to bind and very fast link-up, quick and extremely stable in performance. AFHDS 3CH Receiver. Only 6.5g in weight and 37.6*22.3*13mm, Ultra-lightweight design. Suit for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S transmitter, great for RC cars/Boats. Specifications: Brand: Flysky Product Model: FS-GR3E PWM channels: 3 Wireless frequency: 2.4GHz Wireless protocol: AFHDS Range: 100～200m (ground) Antenna type: single antenna (150mm) Failsafe: yes (channel 2) Bind port: yes (channel 3) Power port: yes (VCC) Power: 4.5-6.5V DC Model type: car/boat Temperature range: 0 ℃ — + 60 ℃ Size: 37.6*22.3*13mm Weight: 6.5g

2.4G FS-GT2 2CH Radio Model RC Transmitter & Receiver Car Boat Features: Super active and passive anti-jamming capabilities. Very low power consumption. High receiving sensitivity. Work between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points. Use a linear spread of fine paragraph by an excess antenna. It covers the entire band width of the antenna bandwidth range. Has its own unique ID, increase the anti-jamming capability and stability. Specifications: Transmitter: Channels: 2 Channels Model Type: Car/Boat RF Power: Less than 20dbm Modulation: GFSK Code Type: Digital Sensitivity: 1024 Low Voltage Warning: Yes (less than 9v) DSC Port: Yes Charger Port: Yes Power: 12V DC

This product is specially developed for remote control cars and boats. It supports multi-device and multi-user simultaneously with fast response speed and strong anti-interference ability, very low power consumption and high receiving sensitivity. Special speed limit function. Besides, TG-3 2.4Ghz remote system with intelligent design, can be widely used. Let beginners can control the car or boats within limited speed range. It also has a special throttle limit switch! Features: High receiving sensitivity. 3CH remote control for RC cars and boats. Multi-device and multi-user simultaneously. Built-in design of the antenna in the transmitter. Very low power consumption, and stable

The Trailer comes with two rubber tyres made of high?quality material is specially designed and manufactured for Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car to enjoy DIY delight. Feature: Make your RC car more vivid and attractive. Made from high quality metal, durability in use. Novel appearance, exquisite workmanship and unimaginably?perfect. Good choice for children to experience DIY delight and?exercise the ability. Suit for 1/10 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10?D90 HPI RC Crawler Car. Specifications: Item name: Trailer Car Quantity: 1pcs Main material: Metal Color: Black Weight: About 463g Item size: 29 * 21.5 * 13cm Suits for: 1/10 Traxxas HSP Redcat

2PCS High Grip 2.2 Inch RC Rubber Tire Alloy Beadlock Rims?Wheel Upgrade Parts for Traxxas Hsp Redcat Rc4wd Tamiya Axial scx10 D90 Hpi RC Crawler. Features: Suitable for 1/10 Traxxas Hsp Redcat Rc4wd Tamiya Axial?scx10 D90 Hpi RC Crawler. Unique design, exquisite workmanship and perfect?appearance. Economical way to give a big visual upgrade to your?vehicles profile. Made of high quality metal and rubber, light weight, good?heat dissipation and stability. Shock-proof and high crush-resistant, just enjoy the?unprecedented RC delight. Specifications: Item name: Crawler Wheel with Rim Material: Metal and Rubber Quantity: 2pcs Color: Silver?& Black Wheel Diameter: 120mm Rim Diameter: 60mm

Features: The FGr4P uses AFHDS 3(Third Generation Automatic Frequency Hopping Digital System). It uses a single antenna with two-way transmission capabilities and is designed to be compact and easy to install. It can output standard PWM, i-BUS, and PPM. Suitable for AFHDS3 system remote controller. Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing. Any problem, please contact our store without hesitation. Honor to serve you. Specification: Product Model: FGr4P PWM Channel: 4 Wireless Frequency: 2.4GHz Wireless protocol: AFHDS 3 Range:> 200m (ground) Antenna type: single antenna (150mm) Power: 3.5-8.4V RSSI: Supported Data port: PWM / PPM / i.bus

Features: Performance: With anti blocking and anti burning protection function, with waterproof function. CNC precision gear, it is more wear-resistant and not easy to break and sweep teeth. Replacements for 1/5 Traxxas ARRMA KRATON BAJA RC car parts robot boat helicopter. Great choice for university professors and students who are interested in developing software for robot parts. If there are any problems, please contact our store in time. We will give you a satisfactory solution. Specifications: Item: 80kg Digital Servo Number of Teeth: 15T Rotation Angle: 180 ° Deadband: 3 μ s Operating Frequency: 1520 μ s / 330hz Motor: High Performance Iron Core Motor Speed (6V): 0.17sec/60 °

Features: 3CH remote control for RC cars and boats. Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands. It covers the entire band width of the antenna bandwidth range. Adopts AFHDS (Automatic Frequency Hopping Digital System). High receiving sensitivity. Super active and passive anti-jamming capabilities. Very low power consumption, and stable performance. LCD screen display. Specifications: Transmitter: Channels: 3 Mode type: car / boat RF range: 2.4-2.48GHz Band width: 500KHz Band: 160 RF power: less than 20dBm 2.4G system: AFHDS Code type: GFSK Sensitivity: 1024 Low voltage warning: yes (less than 9V) DSC port: 3.5mm (output: PPM) ST range: 90 degrees (L: 45, R:

GMr is a 4-channel micro/mini car receiver, using AFHDS 3 (third-generation automatic frequency hopping digital system), single external antenna bidirectional transmission, micro size, and reserved gyro interface. The GMR receiver is compatible with RC racing cars and drifting mini cars. Features: * This 2.4CHz receiver with 4-channel is suited to DIY your RC car especially high-speed cars such as RC racing cars and drifting mini cars. * The receiver is compatible with PL18/NB4 and NB4 Lite all the transmitters which with AFHDS 3 protocol. realizing a strong anti-interference ability and quick response within 5ms, accurate response to weak signals, and active avoidance of co-channel

Features: JCX-M6 is a flight controller especially designed for fixed-wing airplanes. It can perform calculation for flying wings, elevators, and rudders and output compensation rudder volume for channels in real time to facilitate stability of airplanes during flight. JCX-M6 features special flight assistance function which can help control flight modes. Inverted flight, slanting flight, and hanging flight are available without compromise. Under a fourth or fifth wind force, airplane KT330 can still have inverted flight, slanting flight, and hanging flight. With proper power and driving force, wind is not a problem now. fixed wings, flying wings triangular wings, and V-tails aero-engine

These high quality 1.9 inch 1/10 tires are suitable for 1/10 RC Traxxas D90 SCX10 AXIAL RC4WD TF2 Rock Crawler. With its terrific quality and performance, it can satisfy the needs of the racers. So come and take it home, excellent choice will let you enjoy more fun. Features: Fine workmanship and perfect style Wider tires increase the wheel stability Upgrade solid wheel rim made it more durable True beadlock wheels-no gluing, convenient to change the tires or wheels Large, deep lugs provide exceptional traction in rock, mud, and dirt These tires are made of super soft compounds for good grip over all kind of terrain Designed for 1/10 RC Traxxas D90 SCX10 AXIAL RC4WD TF2 Rock Crawler

Dancing Wings Hobby E1101 Lighting 1060mm Wingspan EPP Flying Wing RC Airplane Training KIT Note:?This item is the KIT version, not includes any electronic devices. Features: How to play: turn on the airplane, then throw it into the air, control it by a remote control 1060mm wingspan for good stability EPP material to resist crash Simple structure, easy to install Easy to control, suitable for new players to improve flying skills Specifications: Brand Name: Dancing Wings Hobby Item Name: Lighting Flying Wing? Material: EPP Wingspan: 1060mm Length: 550mm Flying Weight: 230-280g Propeller: 6030 Suggested Power System: Electric Motor: MM1908 2050KV ESC: 20A Servo: 9g * 2pcs BATT: 2S 800mAh