Powerline Adapters

Cisco AIR-PWRINJ7= PoE adapter 5 Gigabit Ethernet 56 V

Power injector 60W outdoor un-connectorized.

The Cisco AIR-PWRINJ6= Power over Ethernet (PoE) Injector increases wireless LAN deployment flexibility of supported Cisco Aironet access points. This PoE injector provides an alternative powering option to local power inline power-capable multiport switches and multiport power patch panels. It uses wires in an Ethernet cable to supply inline power to an access point.

The Cisco Aironet Power Injector (AIR-PWRINJ5) increases wireless LAN deployment flexibility of Cisco Aironet Access Points by providing an alternative powering option to local power inline power-capable multiport switches and multiport power patch panels.

The single-port Cisco Aironet Power Injector provides 802.3af power and data signal sending both to the Cisco Aironet Access Point.

The power injectors provide up to 15.4 W over the unused wire pairs of a Category 5 or better Ethernet cable supplying enough power for a distance of 328 ft. (100 m) on the Cisco Aironet 1040 1140 1260 2600 and 3500 Series Access Points. While it can also support the Cisco Aironet Series 3600 Access Points …

Digitus 8-Port Gigabit Ethernet PoE Injektor, 802.3bt, 250 W

Axis 5027-421 PoE adapter

If you want to move to IP and it is time to replace your analog video cameras, AXIS T8640 PoE+ over Coax Adapter Kit is an efficient way to make the switch – and keep your Coax cabling. AXIS T8640 PoE+ over Coax Adapter Kit includes two adapters, one for connecting a network camera to a Coax cable and one for connecting it to the network (see Typical set-up).Let your Coax cables do double-duty:- AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of…

Axis 5026-203 PoE adapter Gigabit Ethernet

Single port PoE midspan, IEEE 802.3af (15W). The midspan can be installed on a wall, shelf or DIN rail with an accessory DIN clip.

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance a switch is normally used as a repeater or optical fiber may be used.

To overcome this distance limit network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable and forward the rest to the camera. Dependent on midspan and camera type the connection in total can be between 200-400 meters (656-1312 ft.).

Compatibility
AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections …

Digitus 4 Port Gigabit 4PPoE Extender, 802.3at, 60 W

Inject 80 Watts of Power Into Your Internet of Things (IoT) or PoE Network!

Up to the task

The Intellinet Network Solutions 2-Port Gigabit Ultra PoE Injector provides up to 50 W on the first port and up to 30 W on the second port to support IoT applications such as lighting sensors and building automation. Nurse call systems require 30 to 50 watts of power. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts. This Ultra PoE injector is an excellent solution for bringing power to these critical systems.

Full Compatibility with Existing IEEE 802.3af/at PoE Powered Devices

The Intellinet Network Solutions 2-Port Gigabit Ultra PoE Injector help …

Digitus 2 Port Gigabit 4PPoE Extender, 802.3at, 60 W

Digitus 1 Port zu 2 Port Fast Ethernet PoE+ Repeater, 802.3 af/at

LevelOne 1-Port RJ-45 Gigabit PoE Repeater

Digitus 10 Gigabit Ethernet PoE+ Injector, 802.3at, 30 W

AXIS TU8001 Ethernet Surge Protector helps reduce downtime service and maintenance of your system by shielding your PoE devices against transient voltage spikes in the Ethernet cable. It is a compact high-quality product validated to work seamlessly with Axis devices.N/AN/AAXIS TU8001 is perfect to be installed close to a PoE switch located indoors or in an outdoor electrical enclosure cabinet adjacent to a network camera or another device. Placing it in an enclosure you get less exposed wiring simpler troubleshooting of the whole system and less hardware visible on the pole. The product can be easily mounted on a wall or on a DIN rail.N/AN/AWith a network device and a surge protector from Axis …

Axis 02209-001 PoE adapter

Axis 02208-001 PoE adapter Fast Ethernet, Gigabit Ethernet 56 V

Axis 01154-001 PoE adapter Gigabit Ethernet

The AXIS T8129-E Outdoor POE Splitter is a reliable and durable device designed for outdoor installations in both residential and commercial settings. The device is housed in a sleek white casing that seamlessly blends with any outdoor environment.This POE (Power over Ethernet) splitter is specifically designed for smart homes, enabling users to conveniently power their compatible devices through a single Ethernet cable. With its advanced power management technology, the splitter efficiently distributes power to connected devices, ensuring stable and reliable performance.The AXIS T8129-E Outdoor POE Splitter is equipped with advanced safety features to protect connected devices from power surges,…

D-Link's DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This …

Connect two LC fiber cables or establish fiber connectivity on a keystone patch panelConnect two LC Duplex fiber cables featuring UPC polished ends to extend a network connection using this LC to LC Keystone Coupler. The female to female fiber coupler maintains optimal signal integrity while achieving low insertion loss that exceeds industry standards.Compatible with Single Mode and Multimode Fiber CablesThe LC Fiber Coupler supports Single Mode and Multimode LC/LC fiber cables. It is compatible with OS1/OS2 (9/125m) and OM1/OM2/OM3/OM4/OM5 (62.5/125m and 50/125m) fiber core/cladding. The coupler fits securely into the keystone jack which can be installed in a keystone patch panel or wall plate …

Rugged PoE Splitter | 12-48V DC | IP-30 Aluminum Housing | 1.5A Power Output

Splits a PoE connection (max 90W) into separate data (RJ45) and DC power (terminal block) that can power any device that uses DC power between 12V-48VDC (1.5A). Power non-PoE devices using network infrastructure where power is not available.

Power Non-PoE Devices

Perfect for using PoE to power older devices while also providing network access for monitoring and control applications. Applications include:

Security (card swipe or proximity boxes)

Environmental monitoring (temperature/moisture sensors)

Telco (analog interface systems/conversion)

Straightforward Deployment

Supports IEEE 802.3af …