Amplifiers

Trade in your Arcam FMJ AVR400 AV Receiver with AV.com. If youre looking to enhance your home cinema or audio setup considering a trade-in could be a prudent move. The FMJ AVR400 has been a solid performer known for its audio quality and reliability. However advancements in audio-visual technology such as support for the latest surround sound formats 4K video pass-through and integrated streaming services may offer a more immersive experience. By trading in at AV.com you can explore the latest in AV receivers possibly opting for models that offer these modern features ensuring your home entertainment system remains at the forefront of technology and provides the best possible experience

Collingwood PR3002 24V RGBW/RGB Power Repeater

Supplied with 35 m loop wire for setting up an induction loop, SCART adapter, PSU Integrated alarm signal can be switched on additionally Dynamic compressor. 2-way tone control Adjustable input sensitivity for line and microphone LEDs for power, signal/PEAK and loop current

Two-channel amplifier with a power of 2 x 50 W with practical dimensions of 19 x 28 cm. Thoughtful simple solution, ideal for schools, conference rooms, bars and restaurants. Thanks to its sound qualities, it will also appeal to a number of beginning Hi-Fi fans. There are two multifunctional controls on the front panel and a backlit display is located under the black acrylic. In the active state, the display subtly illuminates the black area, in the off state, the forehead is pure black, or with a light point indicating the standby mode. The aluminum bottom of the casing is also a heat sink that dissipates heat from electrical circuits. The internal power supply is provided by a powerful toroidal …

Integrated Amplifier / Stereo / Output power per channel 100 Watt / 3.5mm-In / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Headphone Amplifier / Total Connected Load 40 W / Number of Channels 1

Mini-size 100W high fm output power CB Power: 100W Turn on/off switch Automatic receive/transmit switch Electrode Frequency Range: 3-30MHz Operate Voltage: 12-14Vcc Input Current: 14-20A Input Power: 1-5W Input Power SSB: 2-10W FM Output Power: Max.100W AM Output Power: Max. 150W Output Power SSB: Max.300W Working Mode:FM-AM-CW-SSB Fuse: 2 x 12A Material: Metal colour: As shown Package Contents: 1 x CB Radio Power Amplifier(-300PLUS) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Features: Particularly powerful with full 150W + 150W amplifier. 10 channels with XLR and Line mono inputs. 2-band EQ (HI & LOW) on each channel and 5-band graphic equalizer on the main. Built-in 16 kinds of LCD display digital effects. Built-in 48V phantom power for condenser microphone use. With USB & SD/ MMC Card input interface and LCD display. With speaker outputs(L & R) and main XLR outputs (L & R). Great for DJ, stage and karaoke to have a perfect sound effects. Specifications: Color: Dark blue Material: Metal Power adapter: US Item size: 46.5 * 31 * 13cm / 18.3 * 12.2 * 5.1in Item weight: 7.2kg / 15.9lb Package size: 51 * 37.5 * 18cm / 20.1 * 14.8 * 7.1in Package weight: 8.1kg / 17.…

Brand new NFCA discrete amplifier ▶️ The newly developed NFCA discrete power amplifier reaches a new level of pristine sound processing and reproduction. B200, with its unprecedented 200W performance, will bring you pure auditory enjoyment. Three sets of XLR/TRS balanced inputs ▶️ To utilize the balanced composite interface and construct a balanced playback system, ensure the simultaneous use of two B200 units. 200W output power ▶️ B200 has a powerful output power of 200W, which can meet the needs of more kinds of speakers. B200 provides high/low gain options. You can flexibly choose the appropriate gain according to different environments and equipment requirements.

Headphone Amp / 1x S/PDIF IN (TOSLINK Optical) / Max Sample Rate 768 kHz / Bitrate 32 bit / DLNA Network Function / Bluetooth / Streaming Service Tidal

Superior Audio Quality : The fully balanced class D amplifier design with dual MA12070 chips and low THD+N levels provide pristine, distortion-free audio even at high volumes. High Power Output : With the ability to output 80W x 2 at 4ohm load and 65W x 2 at 1% THD+N, the PA3s has enough power to drive any bookshelf or floor-standing speakers. Versatile Inputs : The TRS balanced and RCA single-ended inputs eliminate ground loop problems, making it easy to connect to a range of audio sources. The front panel button allows easy switching between inputs. Comfortable Listening Experience : With the lowest THD+N in the range of 10-20W output, the PA3s offers an optimal listening

The JBL MA510 5.2 Channel AV Receiver is a step up from the MA310 model thanks to its support for both 8K/60Hz and 4K/120Hz visuals. The four HDMI 2.1 inputs let you relish ultra-high-definition video providing an incredibly detailed and lifelike picture. This AVR even features HDR10+ and Dolby Vision technologies for enhanced brightness contrast and colour accuracy. The receivers efficient Class D amplifier produces 75W of power to 5.2 channels providing a low-noise sound to your audio sources. For gaming HDMI 2.1 technology in the MA510 supports Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) providing seamless gaming experiences with reduced input lag and screen tearing. VRR …

Packaged included: 1 x Audio Power Amplifier 1 x Remote control Specifications: Size: 26 * 29 * 10cm Rated voltage: 220V-240V 50 / 60Hz Rated power: 1200W Peaks: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Colour: Black Features: -Support 4 way microphone input -LED display -2 tack output With EQ -Reverberation, fine tuning, balance, SD, USB interface.

D10s is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 D10s uses XMOS XU208 for USB interface and uses customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native. Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC. D10s can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night. D10s has OP amp socket, DIYer could change the OP amp to get different sound.

Four-chip decoding for superior sound：The DL100 is capable of directly sampling 32bit/768kHz PCM digital audio without down sampling. lt also supports DSD256 native DSD playback without conversion.Optical and coaxialinputs support DOP 64. Newly upgraded headphone amplification circuitry：Adopts self-developed independent amplification circuit for excellent performance. Performance compared to the previous generation of CS43131 products, the output power increase of about 16 times at 300Ω. USB Dual Mode 2.0/1.1: There are 2 different USB modes that can be switched within the menu, using USB2.0, driver installation is required to support high sample rate audio files up to 768kHz/32bit. Using USB1.…

Lightweight 2-channel 40-watt combo amplifier for electric guitar from AK series equipped with 8” speaker, ideal for practice at home or for beginners. Its rugged enclosure with protective corners made of durable plastic makes it easy to carry and fitting even in a small space. Combo is equipped with 2 channels for clean guitar sound with switchable Overdrive effect (distortion), 3-band EQ (bass, middle, treble), Volume and Master controls, built-in headphone output for silent practice, line output and input for footswitch (not included). Weight: 9 kg. Black colour. Headphone Output: Yes Footswitch Input Port: Yes USB: No Speakers: 1x 8 " DI Output: No Power (Watt): 40.0 Made in:

Q240 power amplifier 2 x 120WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T2A (240V) / T4A (110V)Power max. : 4 Ohms - 2 x 120WPower rms : 4 Ohms - 2 x 60WPower rms : 8 Ohms - 2 x 40WDimensions - 482 x 240 x 88mm (2U)Weight - 5.2kg

Features: 1¡¢The waterproof 4 pole speaker plug jacket is suitable for cables with a diameter of 6~15mm, which is fully in line with the industry standard for speaker connection 2¡¢Humanized locking design with chuck type stress release, accurate and reliable twist lock latch system is easy to operate 3¡¢The speaker plug has an extremely reliable and sturdy cable connector with a reliable locking system 4¡¢The product contact with the screw terminals firmly, including multi strand protection, and solder terminals 5¡¢The audio connector has a continuous rated power of 30A rms, nickel plated brass contacts possess good electrical conductivity, reliable connection, used in plug ins and shells to …