Amplifiers

The JBL MA9100HP is the pinnacle of JBLs MA series AV receivers perfect for premium home cinema setups with stunning audio and video performance. This 9.2-channel AVR delivers a powerful 140W RMS per more→channel suitable for larger rooms and more powerful speaker setups. As one of the two High-Performance models in the range its also Dirac Live Ready ensuring you can fine-tune your system for optimal acoustics in any room. Gamers will appreciate the HDMI 2.1 support offering features like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) for smoother gameplay quicker response times and reduced input lag.Enjoy immersive Dolby Atmos and DTS:X decoding ensuring support for lifelike spatial …

You can connect D10 Balanced to your amplifier/headphone amplifir's input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolu more→tion files. D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native D10 Balanced will synchronously power on/off with PC. D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Liunx, it can be set in the music playback software. when using ASIO with Windows, you can use the customized driver from Thesycon. D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not

Preamplifier for MM turntables powered by an external switching power supply (included). Allows the turntable to be connected to devices without special Phono input. High-quality design for perfect no more→ise reduction. High-quality, long-lasting components are used. Quality, steady sound. Technical parameters: Rated input impedance:> 47 kOhmNominal load impedance: ≥ 22 kOhmTHD distortion:

Germany's Infineon's new digiral high-power amplifier chip. Japan's NJRC company electronic volume control chip NJW1194. It can be bridged into a single-channel amplifier with higher power to drive a more→large speaker. The built-in high-pass filter circuit can filter out the subwoofer, drive the main speaker, and cooperate with the subwoofer to form a 2.1 system. Equipped with subwoofer signal pre-output, it is convenient to connect active subwoofers to form a 2.1 system. 165W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.004% THD). 12-month warranty, you can return the item or replace a new one if you have any problems.

Volume Control & BTL: SMSL amplifier uses the Japanese NJRC company's NJW1194 electronic volume control chip. This precision chip delivers accurate volume control and ultra-low distortion, ensuring pu more→re, unaltered sound quality. It is a powerhouse amplifier that utilizes the latest BTL (Bridge-Tied Load) technology, ensuring top-notch quality, exceptional efficiency, and minimal energy consumption. SMSL A300 Amplifier: The Audio amp uses German Infineon's new digital high-power amplifier chip MA5332MS has high efficiency and low energy consumption. The stereo mono amplified mode has a powerful output power rating of up to 165W in a 4Ω load. Even with a high impedance load of 8Ω, the A300 pr…

Bluetooth 5.1 High-end Chip QCC5125：Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting more→up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C. Supports TRS Balanced Output. Support DSD Direct.

Sleek decora finish: The sleek decora finish seamlessly blends in with your room's decor. Clean, refined sound: Your audio is delivered clean and refined thanks to the system's ultra-low total harmon more→ic distortion (1 watt@1kHz into 8 ohm). Versatile playback choices: The amplifier includes USB, microSD card, Bluetooth, FM radio, and line level AUX inputs. It supports wav, mp3, wva, ape, flac, aac, aiff, and wma digital audio formats. Flexible control: All system controls are at your fingertips with the on-face control buttons or with the included wireless IR remote control. All system controls are at your fingertips with the on-face control buttons or with the included wireless IR remote …

The Auteur DT is a versatile preamp/DI box ready to suit all of your single-channel recording needs. Thanks to 60 dB of Chicago console-style gain and 1/4” and XLR inputs, Auteur DT will accurat more→ely capture and enhance anything you throw at it: the crackling snap of a well-tuned snare — or the thunder, resonance, and decay of a ‘70s acrylic kick drum getting hit hard. Add heat and texture to synths and mix-penetrating presence to vocals. Rest assured — anything you plug into the Auteur DT will sound better coming out of it.Auteur DT exists to capture every bit of sweat equity that goes into your recordings... in fact, bringing out the fully polished potential of your final …

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB d more→ynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

TOA A-2060DD audio amplifier 1.0 channels Performance/stage Black

The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS more→inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a black finish that will fit in with your homes character.

Support MQA CD Your CD player's digital output (optical or coaxial) can be fed to an MQA de- coder. The MQA decoder can restore the original high-resolution signal heard in the studio and confirm it, more→using the authentication signature.SMSL M500 MKII support MQA CD. Aluminum alloy CNC precision machined housing Adopt anodizing technology and chamfering process High-end appearance, delicate touch, exquisite and durable Tempered glass panel Higher light transmittance highlights simplicity and beauty With 1.9-inch IPS full-angle screen, high-end and durable Exquisite layout of the upper and lower floors to maximize the use of space Upper audio, middle digital, bottom power, complementary

Mini Amplifier / Stereo / Output power per channel 75 Watt / Bluetooth

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC. The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz. 4x high-end dual more→op-amp OPA1612 and a large number of audio grade components. All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.

Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Blueto more→oth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel

Product description: Product name: 120W HIFI Bluetooth lossless decoding HDMI ARC optical fiber coaxial wireless karaoke karaoke amplifier Power amplifier type: AV power amplifier Rated power: 120W Im more→pedance: 4-8 ohms Channel: 2.0 channel Working voltage: DC8-24V Working current: ≥5A Power interface: 5.5*2.1mm Bluetooth version: Bluetooth version 5.0 Microphone interface: 6.35MM Audio input: Bluetooth/HDMI ARC/optical fiber/coaxial/USB/recording/priority microphone Karaoke/wireless microphone input//remote control USB supports MP3/WAV/WMA/FLAC/APE Size: 100*100*36MM Package included: 1*Amplifier 2*Microphone(Not include battery) 3*Cables