Amplifiers

Flagship achievement flagship :D90LE uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, achieves ultra-high performance in the audio field. Each channel of the D90LE will be arranged in parallel by 4 conventional balanced channels. This makes the performance of D90LE even better. Bluetooth 5.0 LDAC transmission: D90LE has the certification of Hi-Res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDACIAAC/SBC/APTX/APTX LL/APTX HD protocol.To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it'sdigital signal to ES9038PRO to decode. We use CPLD to process the clock and greatly optimize the digital signal, so that

Mighty Bass 50BTMighty Bass 50BT is a compact bass amplifier for rehearsal and session work with a host of internal features for the bass guitarist.Incorporating the proprietary TS/AC technology and Impulse Response modelling, a wide range of amplifier and speaker types are at the player's disposal that belie the cabinet's compact dimensions. For rehearsal, the Mighty Bass 50BT has a 50W class D power amplifier to cut through and deliver full bass response to the custom 6.5" speaker unit. A full arsenal of built-in effects and amplifier settings can be edited onboard or via Bluetooth using the NU-X MightyAmp app for ios or andriod, and saved to the 3 internal channels. Bluetooth can also stream …

Features: - A set of speakers is a suitable amplifier for small PARTY - Two signal inputs: DVD signal and AUX signal - LINE output, signal output can be connected to active subwoofer or other equipment signal source - Center surround output, 2 channels including center one, surround two - With remote control - bluetooth 5.0 - With FM radio - 5-band EQ mixer - Reverberation, fine tuning, balance - SD, USB interface, 4 microphone inputs. - with microphone reverb and delay adjustment Specifications: Model:336BU Size: 290×95×240mm/11.4x3.7x9.4in Rated voltage: AC 110V/220V 50/60Hz, DC12V Peak: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard

Digital Power Amplifier Board, Stereo With Bluetooth 5.0. Specifications Maximum Power Per Channel: 100W Bluetooth Version: 5.0 Chip Type: Class D Chip Model: TPA3116D2*2 Power Supply Voltage: DC12~24V Standby Current is About 60mA Output Channel: 2.1 Channel Output Power: 100W+2*50W(42) Power Efficiency: Above 90% Product Size: 1167330mm Installation Size: 110*45mm Installation Aperture: 3mm Weight: 130g. We are an international based seller that will ship your order from abroad, please at least a minimum 14 working days for delivery right now due to the ongoing delays in shipments globally.

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …

Power Amplifier / Number of Channels 2

DI Box / Desktop / Number of Channels 2

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

The JBL MA510 5.2 Channel AV Receiver is a step up from the MA310 model delivering a top-tier audio and visual performance. Through the four HDMI 2.1 inputs youll get ultra-high-definition video at up to 8K/60Hz and 4K/120Hz providing an incredibly detailed and lifelike picture. It even features HDR10+ and Dolby Vision technologies for enhanced brightness contrast and colour accuracy. The receivers efficient Class D amplifier produces 75W of power to 5.2 channels providing a low-noise sound to your audio sources. The Pure Direct mode ensures the highest audio fidelity by bypassing unnecessary processing stages delivering an immersive sound. The MA510 also features a high-quality 192kHz/24-bit …

Foldable amplifier stand that can hold monitor speakers, amplifiers or other equipment to a maximum weight of 35 kg without a problem. The angled tube front legs with cross braces have significantly improved the stand's stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. The stand is made of steel and the support arms are covered with non-marring rubber for better protection of the equipment. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8'' or 5/8''. Adjustable height: 570-990 mm. Folded size: 122 x 86 x 602 mm. Support de…

Phantom power supply for microphones. Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 V all the way down to 9 V. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be ''more is better''. Features XLR input and output, and 18 V DC input. Power supply is included. Dimensions: 130 x 74 x 45 mm. Weight: 315 g. Made in: China

Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Bluetooth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel

Aluminum alloy CNC machining process： Using anodizing technology, fine workmanship, Good touch! Qualcomm Bluetooth 5.0 receiver, support APT-X：Better sound quality, longer transmission distance! APT-X Lossless music transfer： Low latency, good fault tolerance, high sound quality! Powerful bass pre- amp output： The output is adjustable from -30~+10dB, used to connect with a far- subwoofer speaker to form a 2.1 audio system! 2 separate high-power digital power amplifier chips 230W×2（4Ω） ：Use two separate digital power amplifier chips, output 230W per channel at 4 ohms, easy to drive most speakers! Electronic volume control chip NJW1195： Japan's NJRC company electronic

Amplifiers for installations

If you want to run several long lines between the TV audio line and a receiver on the other side of the room, provide high gain through any line level signal source, allow longer cable lines to run, or require "buffering" to solve low volume problem, you shouldn"t miss this stereo audio distribution amplifier. You can use it to add signal amplifiers between the line level signal source and the power amplifier, and the RCA jack matches almost all other product interfaces.This product can increase the sound quality of the control signal and reduce the bottom noise. Features: 1 * input interface for connecting TV audio, MP3 player, video game machine, smartphone, tablet, computer, record player …

Power Amplifier / Total Connected Load 1,600 W