Amplifiers

Signal Processor / 19 Inch Size / Processor Type Expander / Number of Channels 4 / Rack Height 1 RU

Power Amplifier / Number of Channels 2

Superior Sound Quality : With the ESS SABRE ES9028Pro DAC chip, the E70 delivers powerful performance and exceptional sound quality. Its 8-channel Hyperstream II architecture ensures a rich and immersive audio experience. Innovative I/V Conversion : The E70 features a brand-new conversion circuit that provides lower distortion and noise in a compact design. It performs at an impressive 0.00006% THD+N, ensuring crystal clear sound. High-Quality Bluetooth Streaming : The E70 supports 24bit LDAC Bluetooth streaming, thanks to its QCC5125 Bluetooth 5.1 chipset. It reroutes the digital signal from the Bluetooth chip to the ES9028Pro DAC chip for the best sound quality. Wide Compatibility

Class-d amplifier providing 50 watts/channel (RMS) into 8ohm loads or 65 watts/channel into 4ohm loads. Bridgeable output provides 120 watts into a single 8ohm load 4 pole detachable speaker screw connector (Phoenix connector) with support for up to 12AWG speaker wire. 12-volt trigger input for power-on/off. 12-volt trigger output for controlling other devices. Buffered loop output of original signal for connecting additional amplifiers Rear panel volume gain adjustment. Built-in thermal and short circuit protection circuits Includes rack-mount ears for mounting a single amp or two amps side-by-side

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables. Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with 2 amplifiers. Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure hold. Sound: Due to the increased cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system. Quality: The AMP-S Pro has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.

ROHM flagship DAC chip BD34301EKV, Fully optimized its performance, making its THD+N as low as -117dB! Built-in linear power supply composed of british porcupine toroidal transformer. Coordinate multiple low-noise regulated power supplies to provide a stable, reliable, efficient and low-noise power supply system. CK-03 clock processing circuit, the new self-developed CK-03 clock processing circuit greatly reduces clock jitter. Specially designed discrete component regulated power supply and multiple low noise regulated power supplies. Provides low noise power supply for analog circuits. Faster and more stable reception. Support LDAC(24bit/96kHz), APTX/HD, SBC, AAC!

Q600 Series Stereo Power Amplifiers Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers. 6.3mm jack or RCA inputs SPK, 6.3mm jack or 4mm post outputs Fan cooled 19" rack-mountable (2U) Power supply 230Vac, 50Hz (IEC) Frequency response 20Hz - 20kHz Input connectors 6.3mm jack, RCA (L+R) Input sensitivity 775mV, 10k Ohms S/N ratio >98dB …

The Pro-Ject Stereo Box S3 BT Integrated Amplifier is primed for modern desktop listening with an ultra-compact form factor and 21W of power per channel at eight ohms. This minute amplifier has a Bluetooth 5.0 input coupled with aptX HD capability. Once youre connected this input supports high-quality 24-bit/48kHz audio which paves the way for a seamless high-definition listening experience. For hi-fi traditionalists the Stereo Box S3 BT offers two pairs of RCA line inputs with high-quality gold connectors so you can directly connect multiple audio sources at your pleasure. Moreover using the 3.5mm variable output you can expand your music system and play through active speakers a subwoofer …

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Germany's Infineon's new digiral high-power amplifier chip. Japan's NJRC company electronic volume control chip NJW1194. It can be bridged into a single-channel amplifier with higher power to drive a large speaker. The built-in high-pass filter circuit can filter out the subwoofer, drive the main speaker, and cooperate with the subwoofer to form a 2.1 system. Equipped with subwoofer signal pre-output, it is convenient to connect active subwoofers to form a 2.1 system. 165W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.004% THD). 12-month warranty, you can return the item or replace a new one if you have any problems.

Power Amplifier / Total Connected Load 700 W / Number of Channels 1

Signal Processor / 19 Inch Size / Processor Type Limiter / Number of Channels 2 / Rack Height 2 RU

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Built-in DAC ,Supporting common digital signal inputs: The MX3s features an AKM DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Bluetooth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile. Nice Bluetooth performance: The MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience. Subwoofer Output: The MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel

【High Performance DAC AMP Chip】: The SMSL AO300 uses the MA5332MS power amplifier chip, the CS43131 decoding headphone amplifier chip, and the NJW1194 Volume Control Chip. These cutting-edge chips have been designed to deliver exceptional audio performance, with minimum distortion and interference. It supports MQA and MQA-CD decoding and restores the sound of the recording studio. 【2.1 Channel Audio Amplifier System】: The stereo amplifier features a 2.1-channel active audio system with subwoofer output, delivering an output power of 165W x 165W. This system has been carefully designed to provide an immersive audio experience with deep bass and rich sound quality. Bluetooth 5.1 also