Amplifiers

Subwoofer Digital Bluetooth Amplifier Board. Features: 1. Support Reading MP3 Songs in TF Card and U Disk; 2. Support Independent Adjustment of Treble, Bass and Master Volume; 3, DC 12V, 24V and AC100-240V Three Voltages Can Be Used; 4, With AUX Input, Can Be Connected to the Computer, Mobile Phone or CD Audio to Play; 5, Digital Power Amplifier, Peak Power 400W, Can Drive 4Ohm 100 Magnetic Speakers; 6, Dual Microphone Input, Adjustable Reverb; Built-in Bluetooth Wireless Receiving and FM Radio Function. Specifications: Maximum Power Per Channel: 100W Model Number: Subwoofer Digital Bluetooth Amplifier Package: Yes Channels: 1. We are an international based seller …

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 2 RU

SMSL A200 uses 2 pieces of Infineon's new Silicon Carbide digital power amplifier chips, which provide higher quality and up to 92% efficiency, further reducing energy consumption. Support Bluetooth, optical, coaxial, HDMI audio, USB, line input. new Bluetooth 5.0 technology, both low power consumption and high sound quality. Support HDMI (ARC) audio return function, used to connect to the HDMI interface of the TV, to achieve the output of the TV audio. electronic volume control, eliminating the potentiometer volume adjustment when the noise. Optical support up to 24bit/192kHz signal input. With sound effects adjustment, high and low sound individually adjustable. With pop sound control circuit,…

Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

ROHM flagship DAC chip BD34301EKV, Fully optimized its performance, making its THD+N as low as -117dB! Built-in linear power supply composed of british porcupine toroidal transformer. Coordinate multiple low-noise regulated power supplies to provide a stable, reliable, efficient and low-noise power supply system. CK-03 clock processing circuit, the new self-developed CK-03 clock processing circuit greatly reduces clock jitter. Specially designed discrete component regulated power supply and multiple low noise regulated power supplies. Provides low noise power supply for analog circuits. Faster and more stable reception. Support LDAC(24bit/96kHz), APTX/HD, SBC, AAC!

2.1 Bluetooth Digital Power Amplifier Board -100w, 2 Channels. Specifications: Name:TPA3116D2 2.1 Bluetooth Digital Power Amplifier Board Chip Type:TPA3116 D2  Chip Protection: over Voltage, Under Voltage, Overheating, DC Detection and Short Circuit Operating Voltage Range: DC 11-25V (current 3-4A or More, the Proposed 19-24V / 4-5A Above), Audio Input Sensitivity: 600-800mV, Frequency Response Range: 20Hz-20KHz, Speaker Impedance: Left and Right Channel Speakers: 4-8 Ohm, Bass Speaker Impedance: 2-8 Ohm, The Maximum Output Power: 50W (left Channel) +50 W (right Channel) +100 W (subwoofer), Maximum Output Power: 100w (2 Ohm Speakers Connected) Number of Channels: 3-channels Size: 100* 10…

The Topping LA90 Discrete Class AB Power Amplifier is a flagship amp with newly developed discrete NFCA technology. It can be configured in stereo or mono mode with the ability to control its own volume and utilise two-step gain settings. Connect via the three provided balanced inputs with XLR or TRS interfaces. With a THD+N of less than 0.0001 per cent the LA90 Discrete reproduces music sources with exceptional accuracy. Its wide working range and low distortion under load make it suitable for various setups. Moreover the amplifiers high-precision CNC machined all-aluminium enclosure not only aids in the exquisite sonic detail but also offers reliable and fast heat dissipation for greater …

Double your fun with two channels of active ultra-clean gain. Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best. Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration. Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic. The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback. The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers,

Integrated Amplifier / Stereo / Output power per channel 65 Watt / 1x S/PDIF IN (RCA Coaxial) / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD player/turntable external DAC, digital broadcasting external DAC, TV DAC, and so on. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Use the high-end ES9038RO D/A chip from ESS, which is a DAC chip that reaches the industry's high index. The SNR is as high as 140dB, and the total harmonic distortion plus noise is -122dB. At the same time it is a 32-bit, eight-channel DAC chip,with high resolution and high dynamic frequency response, D1se achieves a low distortion rate of 0.00009% (-121dB). USB/Optical/Coaxial/Bluetooth 5.0 input, RCA/XLR output. Bluetooth 5.0 support aptX/ACC/SBC, USB asynchronization transmission, USB compatible windows 7/8/8.1/10, Mac OSX, Linux. All input ports support DSD transmission, coaxial and optical support DoP64! USB uses XMOS XU-216,Real 32bit USB solution, Support Dop and native DSDPCM up to …

CEQ215 2 x 15-band graphic EQThe CEQ215 is a 19" rack mounted dual 15-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 25Hz to 16kHz for accurate audio spectrum control.2 x 15-band 2/3 octave ISO spacingRF filtered servo-balanced inputsConstant Q each bandBypass switch for EQ comparisonLow-cut switch each channelGain control each channelLED VU meters19" rackmount 1U