Batteries for Drones & RC models

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper…

Made of lightweight and highly rigid aluminum, the surface is hard-coated alumite to improve surface lubricity. (From Amazon.co.jp)

spare parts. (From Amazon.co.jp)

Optional parts for MINI-Z MR-02LM type. Machined aluminum air intake that efficiently cools down the motor. (From Amazon.co.jp)

Used in place of the standard K9 and K10 parts. A 3mm thick carbon stiffener with minimal deflection or bending increases chassis rigidity around the rear, maximizing the damper's operating effect and allowing for more delicate settings. Also included are 3 x 10mm countersunk screws and 3 x 8mm countersunk screws required for assembly. (From Amazon.co.jp)

We have set all the turnbuckle shafts necessary to adjust the camber angle and toe-in of the TT-02B chassis. A total of 7 pieces: front upper arms (one each on the left and right), rear upper arms (one each on the left and right), steering tie rods (one each on the left and right), and steering linkage. You can adjust the length without removing the adjuster, and setting is quick. A plate wrench for length adjustment is also included. [Applicable car models/parts] TT-02B chassis. (From Amazon.co.jp)

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug …

Tamiya Alu Adjustable Susmt (E) - 54882Tamiya Alu Adjustable Susmt (E) - 54882

TAMIYA 54638 Tt 02 Type-S AusfE Derw Egsbe Limiter for 2 CarsDESCRIPCIÓN DEL PRODUCTO ausfe derw egsbe de 300054638 para TT ghp-02s Chassis Contenido: 2 unidades) Advertencia: No apto para niños menores de 14 años.

The weight of the drive system has been significantly reduced by replacing it with aluminum parts. Comes with pin protector. Protects the cup and drive shaft from severe wear. Highly lubricated alumite specification. (From Amazon.co.jp)

Product Features Franchise: MINI 4WD Brand: TAMIYA Color: Multicolor Year Manufactured: 2011 Type: Mortor Theme: Cars & Vehicles Signed: No Language: Japanese Features: Parts

Parts for Kyosho RC. Optional parts for Inferno MP9 TKI3. Machined from aluminum. You can dress up your machine with gunmetal alumite treatment and laser marking. (From Amazon.co.jp)

Main country of manufacture: Japan

Hop-up Options Op.950 Tgm-04 Zero-ru Bevel & Ring GearTamiya OP parts OP.950 TGM-04 Zerorubeberu & ring gear 53950

Main country of manufacture: Japan

To maintain the best condition at all times, replace worn or fatigued parts as soon as possible. Please use it for repair and maintenance of RC cars.

[This is a useful part for improving the performance and setting of RC cars] Used in place of the resin idler gear that comes standard with kits such as the BB-01 chassis. Cutting steel gears dramatically increase the strength of the drive system. [Basic specifications] Made of steel cutting

tamiya parts

タミヤ ホップアップオプションズ No.1820 OP.1820 TT-02B ステンレスサスシャフト & サポートブリッジ RCパーツ 54820Tamiya TT-02B Stainless Steel Shafts & Support Bridge. This replacement steel shaft and support bridge is intended for the Tamiya TT-02B chassis. Package includes two steel shafts and one support bridge.

This is a carbon damper stay that is used in place of the standard M4 part on the TB-03 chassis. By installing a highly rigid carbon damper stay with little deflection or bending, the damper's operating effect is maximized and more delicate settings are possible. There are 4 damper mounting holes. Plate thickness = 3.0mm. Adapted to TB-03 chassis each car. *Note: The body mount position is different from the kit standard. (From Amazon.co.jp)

Blue anodized aluminum turnbuckle shaft. It is lighter than the normal shaft and allows for quick fine-tuning of the length. Used in place of the 3 x 50mm double threaded shaft used in various RC cars, including the steering rod of the TB-05PRO chassis kit.

To maintain the best condition at all times, replace worn or fatigued parts as soon as possible. Please use it for repair and maintenance of RC cars.

To maintain the best condition at all times, replace worn or fatigued parts as soon as possible. Please use it for repair and maintenance of RC cars.