Other Machines & Equipment

Sirius WNMG inserts have six cutting edges and are ideal for medium and roughing turning applications. WNMG inserts are available in 2 sizes and are suitable for use in PWLNR tool holders. Specifications • Grade: LCP15T Steel (Wear Resistant)

Sirius WNMG inserts have six cutting edges and are ideal for medium and roughing turning applications. WNMG inserts are available in 2 sizes and are suitable for use in PWLNR tool holders. Specifications • Grade: TC8125 Steel

Sirius WNMG inserts have six cutting edges and are ideal for medium and roughing turning applications. WNMG inserts are available in 2 sizes and are suitable for use in PWLNR tool holders. Specifications • Grade: TC7120 Stainless Steel

Sirius WNMG inserts have six cutting edges and are ideal for medium and roughing turning applications. WNMG inserts are available in 2 sizes and are suitable for use in PWLNR tool holders. Specifications • Grade: TC8125 Steel

Sirius WNMG inserts have six cutting edges and are ideal for medium and roughing turning applications. WNMG inserts are available in 2 sizes and are suitable for use in PWLNR tool holders. Specifications • Grade: TC7120 Stainless Steel

Sirius WNMG inserts have six cutting edges and are ideal for medium and roughing turning applications. WNMG inserts are available in 2 sizes and are suitable for use in PWLNR tool holders. Specifications • Grade: TC8125 Steel

VCGT diamond shaped 35° carbide inserts are ideal for light turning, finishing, profiling and for creating recesses or relief angles. Specifications • Grade: LW610

VCGT diamond shaped 35° carbide inserts are ideal for light turning, finishing, profiling and for creating recesses or relief angles. Specifications • Grade: LC610T

VCGT diamond shaped 35° carbide inserts are ideal for light turning, finishing, profiling and for creating recesses or relief angles. Specifications • Grade: LW610

Sirius TNMG carbide inserts are made for general machining applications in steel. The benefit of using TNMG over a CNMG insert is reduced vibration due to the wider cutting edge contacting the material when used with a 90° tool holder. PTFNR tool holders should be used for facing and PTGNR tool holders should be used for turning. Specifications • Grade: TC8125 Steel

TCMT turning inserts are made for general machining applications of steel, stainless steel and cast iron. TCMT inserts are available in 2 sizes. They are suitable for use in STFCR and STGCR tool holders. Specifications • Grade: TC8125 Steel

TCMT turning inserts are made for general machining applications of steel, stainless steel and cast iron. TCMT inserts are available in 2 sizes. They are suitable for use in STFCR and STGCR tool holders. Specifications • Grade: TC8125 Steel

Screw Clamping External Right Hand Threading Toolholder

Sirius DNMG carbide inserts are negative universal inserts which can be used on steel, stainless steel and cast iron. A 55° diamond shape makes DNMG inserts ideal for turning and boring and the clearance on the back of the tool holder enables them to be used for profiling. DNMG inserts are suitable for use in PDJNR / DDJNR tool holders. Specifications • Grade: TC7120 Stainless Steel

Sirius DNMG carbide inserts are negative universal inserts which can be used on steel, stainless steel and cast iron. A 55° diamond shape makes DNMG inserts ideal for turning and boring and the clearance on the back of the tool holder enables them to be used for profiling. DNMG inserts are suitable for use in PDJNR / DDJNR tool holders. Specifications • Grade: TC8125 Steel

Sirius DNMG carbide inserts are negative universal inserts which can be used on steel, stainless steel and cast iron. A 55° diamond shape makes DNMG inserts ideal for turning and boring and the clearance on the back of the tool holder enables them to be used for profiling. DNMG inserts are suitable for use in PDJNR / DDJNR tool holders. Specifications • Grade: TC8125 Steel

Sirius DNMG carbide inserts are negative universal inserts which can be used on steel, stainless steel and cast iron. A 55° diamond shape makes DNMG inserts ideal for turning and boring and the clearance on the back of the tool holder enables them to be used for profiling. DNMG inserts are suitable for use in PDJNR / DDJNR tool holders. Specifications • Grade: TC7120 Stainless Steel

DCMT turning inserts are made for general machining applications of steel, stainless steel and cast iron. DCMT inserts are available in 2 sizes. The diamond shape makes the DCMT ideal for boring and turning in SDJCR tool holders and SDUCR/SDQCR boring bars. Specifications • Grade: TC8125 Steel

DCMT turning inserts are made for general machining applications of steel, stainless steel and cast iron. DCMT inserts are available in 2 sizes. The diamond shape makes the DCMT ideal for boring and turning in SDJCR tool holders and SDUCR/SDQCR boring bars. Specifications • Grade: TC7120 Stainless Steel

DCMT turning inserts are made for general machining applications of steel, stainless steel and cast iron. DCMT inserts are available in 2 sizes. The diamond shape makes the DCMT ideal for boring and turning in SDJCR tool holders and SDUCR/SDQCR boring bars. Specifications • Grade: TC7120 Stainless Steel

DCMT turning inserts are made for general machining applications of steel, stainless steel and cast iron. DCMT inserts are available in 2 sizes. The diamond shape makes the DCMT ideal for boring and turning in SDJCR tool holders and SDUCR/SDQCR boring bars. Specifications • Grade: TC7120 Stainless Steel

CNMG inserts are probably the most versatile and widely used of all turning inserts. They have an 80° rhomboid shape and are ideal for general turning, facing and boring. Negative cutting geometry ensures a strong cutting edge for medium to roughing applications and they can be suitable for finishing with the right chipbreaker. CNMG inserts have 4 cutting edges when used in 95° tool holders or 8 cutting edges when used in 75° tool holders. Sirius CNMG inserts are available in 3 sizes and are suitable for use in PCLNR, PCBNR & DCLNR tool holders. Specifications • Grade: LC225K

CNMG inserts are probably the most versatile and widely used of all turning inserts. They have an 80° rhomboid shape and are ideal for general turning, facing and boring. Negative cutting geometry ensures a strong cutting edge for medium to roughing applications and they can be suitable for finishing with the right chipbreaker. CNMG inserts have 4 cutting edges when used in 95° tool holders or 8 cutting edges when used in 75° tool holders. Sirius CNMG inserts are available in 3 sizes and are suitable for use in PCLNR, PCBNR & DCLNR tool holders. Specifications • Grade: TC8125 Steel

CNMG inserts are probably the most versatile and widely used of all turning inserts. They have an 80° rhomboid shape and are ideal for general turning, facing and boring. Negative cutting geometry ensures a strong cutting edge for medium to roughing applications and they can be suitable for finishing with the right chipbreaker. CNMG inserts have 4 cutting edges when used in 95° tool holders or 8 cutting edges when used in 75° tool holders. Sirius CNMG inserts are available in 3 sizes and are suitable for use in PCLNR, PCBNR & DCLNR tool holders. Specifications • Grade: TC8125 Steel