Chains & Reciprocating Saw Blades

Bi-metal reciprocating saw blades for cutting through thick metal. Specifications • Blade Configuration: 152mm x 19mm x 0.9mm, 14TPI Features and Benefits • T2 technology: delivers up to 2X the lifetime of previous generations • Aggressive tang angle and tapered nose for cutting in tight areas • Special design minimises friction and heat when cutting metal Contents • 5 Blades

Metal cutting: steel, stainless steel, alloys, cast iron. Wood with nails. Steel and non-ferrous metals, steel pipe 1.5-3mm section.Features:- Medium cut in steel, alloys, cast iron. Wood with nails. Steel and non-ferrous metals, steel pipe 1.5-3mm section- Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement- Application: Metal cutting: steel, alloys, cast iron. Wood with nails. Steel and non-ferrous metals, steel pipe- Features: Bi-metal reciprocating blade, flexible to resist snapping, Cuts wood and metal 18 Teeth per inch- Tooth Type/Set: A - Milled and side set teethSpecifications:Overall Length: 200 mmPlastics: 3 - 160 mmMild Steel: 1.5 - …

Features:Carbide teeth for precision and durability:- Alternate Top Bevel (ATB) tooth geometry for fine cuts.- Expansion slots for low vibration as well as noise and heat reduction.- Fits standard circular saws from most brands.Specifications:- Blade diameter mm: 150- Bore mm / Bore with reduction ring: 20/16- Cutting width mm: 2.5- Number of teeth: 36

Universal for Wood Applications - The Wood Expert Jigsaw Blade Set, Robust Line, 6-Pieces is the universal choice for special wood applications. Its blades provide precise, fast and clean cuts in hardwood and woodworking materials. They are compatible with jigsaws with a single lug shank system. Fits all T-shank jigsaws. Features and Benefits • Universal for Special Wood Applications • Wood Expert Jigsaw Blade Set, Robust Line, 6-Pieces is the universal choice for special wood applications • Precise, fast and clean cuts in hardwood and woodworking materials Specifications Set contents: T 308 B Extra-Clean for Wood; T 308 BF Extra-Clean for Hard Wood; T 301 BCP Precision for …

Blade Length 40 cm / Drive Link Width 1.1 mm / Chain Pitch 3/8 Inch / Form Half-Chisel

Precise Quality Cuts - The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade's expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held saws. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count,…

Cuts in Metal - The Basic for Metal Jigsaw Blade Set, Cassette, 10-Pieces delivers cuts in metal. Its blades are suitable for solid cuts in sheet metal as well as in metal pipes and profiles. They are compatible with jigsaws with a single lug shank system. Fits all T-shank jigsaws. Features and Benefits • Cuts in Metal • Basic for Metal Jigsaw Blade Set, Cassette, 10-Pieces delivers cuts in metal, pipes and profiles • Suitable for solid cuts in sheet metal, metal pipes and profiles Specifications Set contents: T 218 A Basic for Metal; T 118 G Basic for Metal; T 118 A Basic for Metal; T 118 B Basic for Metal

Precise Quality Cuts - The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade's expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held saws. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count,…

Jigsaw Saw Blade / Wood

The Mforce has a revolutionary advanced tooth design that sets a new benchmark for blade technology. The dual bevelled tooth face has sharper cutting edges and the "M" shape is like doubling the tooth count per blade. A greater wear area and more cutting surfaces means the MForce blade will last up to 2 x longer than traditional blades. A narrow kerf and plate reduce friction allowing for a lighter feed pressure, protecting the motor of your saw. Features & Benefits • Twice the finish with half the teeth • Aggressive cutting • Greater wear area • Longer lasting Specifications • Bore: 20mm • Diameter: 165mm • Kerf: 2mm • Rake: 15° • Thickness: …

The Makita 10-piece super express and laminate cutting jigsaw blade set comes in a handy storage holder. There are 6 spaces for jigsaw blades on the centre plate. You can put approximately 6 to 7 jigsaw blades in each space. Contents • 4 x B-06460 • 2 x B-806476 • 2 x B-06482 • 2 x B-10970

Blade Length 30 cm / Drive Link Width 1.3 mm / Chain Pitch 3/8 Inch / Form Half-Chisel

30% Longer Lifetime - The titanium-coated Starlock ACZ 85 EIB blade has an extra 30% longer lifetime than uncoated BIM (bi-metal) blades. Its TiN (titanium-nitride) coated tooth strip is very heat- and wear-resistant, ensuring extra-long performance. Bosch's patented circular welding technology creates tough freestanding teeth, preventing jams and burn marks and allowing for extended usage. Use for plunge cutting in plasterboard, cement-bonded fibre boards, wood, non-hardened metal, small mouldings, fibreglass and epoxy-reinforced plastic. All Starlock, Starlock Plus and Starlock Max power tools as well as common multi-tools are compatible with the blade. The pointed segment saw blade ends enable …

Chainsaw Bar

DEWALT ELITE SERIES Circular Saw Blades last up to 2X longer
The Dewalt DT10303 is an EXTREME 2nd Fix Circular saw blade with a 184mm Diameter, 16mm Bore and 40 Teeth. The Blade is ideal for decorative wood cutting e.g. skirting boards, dado rails and architraves. It has anti-vibration slots and ultra-sharp teeth to deliver a superior cut finish. What sets DEWALT Elite Series accessories apart is their unmatched performance. The DEWALT ELITE SERIES is Built to Last, so you can forge ahead and finish the job no matter what. If you want to increase your productivity and reduce interruptions, these top-of-the-line accessories are designed to deliver outstanding durability in a comprehensive range o…

Fast Rip and Crosscuts - The Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood. Its high-quality precision-ground carbide teeth make the blade robust enough for rapid cutting while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade´s expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held and table saws. Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood Bore works with or without reduction rings to fit different sizes. Features a…

Sawing handle with two reciprocating saw blades - Saw handle includes 1 x saw handle, 1 x S 922 EF Flexible for Metal, 1 x S 922 VF Flexible for Wood and Metal. Universal use: the ½ inch universal shank allows the reciprocating saw blades to be inserted in hand saws and electric saws. Quick saw blade change by push button on top side and with storage space for two saw blades inside the handle. Features and Benefits • Universally applicable universal shank enables the reciprocating saw blades to be inserted in hand saws and electric saws. • Saw handle includes 1 x saw handle, 1 x S 922 EF Flexible for Metal, 1 x S 922 VF Flexible for Wood and Metal. • Universal use: the ½ inch un…

DeWalt Demolition Carbide Reciprocating Saw Blade designed for the most demanding nail embedded wood. Manufactured with carbide teeth for increased durability, speed and life. Specifications • Blade Length: 230mm • Teeth Per Inch: 6 • Material: Carbide • Application: Cutting Wood & Nails Features and Benefits • Carbide Teeth for increase durability, speed and life • Tall, thick blade profile designed to increase durability and minimizes blade breaks • Carbide Demolition Blades are ideal for the most demanding nail embedded wood

The Construct Wood Circular Saw Blade is durable when cutting construction site timber with nails and concrete residues. Its high-quality precision-ground carbide teeth make the blade robust for tough applications. Moreover, its expansion slots lower vibration during use, which dampens noise and reduces heat development. The blade features a base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) which ensures accuracy. Use this saw blade in construction timber with nails and concrete residues. • Durable When Cutting Construction Site Timber with Nails and Concrete Residues • High-quality precision-ground carbide teeth make the blade robust for tough applications • …

The Mforce has a revolutionary advanced tooth design that sets a new benchmark for blade technology. The dual bevelled tooth face has sharper cutting edges and the "M" shape is like doubling the tooth count per blade. A greater wear area and more cutting surfaces means the MForce blade will last up to 2 x longer than traditional blades. A narrow kerf and plate reduce friction allowing for a lighter feed pressure, protecting the motor of your saw. Features & Benefits • Twice the finish with half the teeth • Aggressive cutting • Greater wear area • Longer lasting Specifications • Bore: 30mm • Diameter: 180mm • Kerf: 2mm • Rake: 15° • Thickness: …

Precise Quality Cuts - The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade's expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held saws. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count,…

Cutting thick metal such as steel profiles or heavy cast iron pipes is probably not the favourite part of your job. Plumbers, renovators and demolition workers alike know that this is a tough task which, even with a powerful recip saw, requires sweat and muscle. The EXPERT 'Thick Tough Metal' not only cuts thick metal, it offers exceptional lifespan in the toughest of applications.With the Bosch EXPERT 'Thick Tough Metal' Reciprocating Saw Blade, you might just start to enjoy cutting thick steel and cast iron.Features:- Long Life Cutting Thick Tough Metal- Exceptional durability is built in with Bosch Carbide Technology.- Wide body for precise, straight cuts.- Fits all S-shank reciprocating …

Saw Blade Set / Wood / Quantity 10 Piece

Fast Rip and Crosscuts - The Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood. Its high-quality precision-ground carbide teeth make the blade robust enough for rapid cutting while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade´s expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held and table saws. Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood Bore works with or without reduction rings to fit different sizes. Features a…