Turntable Cartridges

The Audio Technica AT-LH11H an 11-gram headshell is designed with non-threaded through-holes ideally suited for compatibility with a wide range of cartridges. This even includes cartridges with threaded mounting holes from series such as AT-OC9X AT-ART9X and VM95. As the lightest in the LH series the AT-LH11H Headshells reduced mass decreases unwanted vibrations during playback helping to enhance sound clarity and audio retrieval. The hard anodised finish also minimises vibrations as well as prevents distortion from hindering your listening experience. Equipped with oxygen-free copper lead wires the AT-LH11H delivers flawless signal transmission enabling you to fully engage with your records.…

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. The cartridge is also available in 15-gram (AT-LH15H) and 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

The Ortofon 2MR Red Cartridge has been designed for tonearms with a low ride height featuring a cartridge body that is three millimetres shorter than the standard 2M model. The "R" quite simply means "Reduced" suited to certain tonearms from turntable manufacturers like Pro-Ject Rega and Linn where the correct vertical tracking angle (VTA) is not adjustable or compatible with larger mounting heights.The 2MR is otherwise unchanged and uses the same high-performance technology as the standard 2M Red. It even features the same stylus which makes it easy to swap out or upgrade to the 2M Blue Stylus if you choose. With its tipped elliptical diamond stylus profile this cartridge balances greater tracking …

Elliptical Nude replacement stylus from VM95 series.
Suitable for: VM95NEN
Type: Replacement Stylus
Material: Plastic
Colour: Orange
Suitable for Brand: Audio-Technica
Shape: Elliptical
Application: Hi-Fi
Made in: China

The MIX is a general-purpose model for scratch and back-cueing. Provides great performance and durability.
Type: Moving Magnet;Concorde;Cartridge
Variant: Mix
Shape: Spherical
Tracking force recommended: 3g
Recommended load resistance: 47 kOhm
Voltage: 6 mV
Colour: Black
Tracking Force: 2g - 4g
Made in: Japan
Channel balance at 1 kHz: 1,5
Weight: 18,5 g
Channel separation at 1 kHz: 20
Frequency Range: 20 Hz - 20 kHz
Impedance (Ohm): 700.0
Tracking ability at 315 Hz: 100 μm
Recommended load capacitance: 200-600 pF

Elliptical Nude stereo cartridge from VM95 series. The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses. VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical …

SUMIKOs first offering in the new Oyster lineup is the venerable Rainier which continues the Pearls legacy of smooth natural sound reproduction. After years of development SUMIKO are proud to introduce an all-new integrated body and generator system that improves performance all around.

The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling. The DJ is great for any style of music.
Voltage: 6 mV
Tracking force recommended: 4g
Recommended load resistance: 47 kOhm
Tracking Force: 3g - 5g
Tracking ability at 315 Hz: 100 μm
Variant: DJ
Frequency Range: 20 Hz - 20 kHz
Made in: Japan
Type: Cartridge;Concorde;Moving Magnet
Recommended load capacitance: 200-600 pF
Channel separation at 1 kHz: 22 dB
Weight: 18,5 g
Shape: Spherical
Colour: Blue

The Ortofon 2M Red Verso MM Cartridge shares the same high-performance specifications as the standard 2M Red model but features pre-fitted screws for bottom-mounting headshell installation. This design prioritises compatibility and convenience for headshells that do not allow screws to pass through the top with dimensions and weight that are suitable for a variety of modern-day tonearms.The 2M Red has been meticulously engineered with a precision-machined elliptical diamond stylus tip mounted on a cantilever with split pole magnets that interact with an intricate copper coil system. This moving magnet design enables the engine to amplify the output to 5.5 mV ensuring remarkable sonic accuracy.…

A replacement stylus for AT-XP7 cartridge.
Frequency Range: 20 Hz - 20 kHz
Made in: Japan
Shape: Elliptical

2.2 x 0.12 mil Microlinear replacement stylus for AT-VM95ML cartridges.
Made in: China
Shape: Microlinear

The Sumiko Pearl is a moving magnet phono cartridge that features an alloy cantilever with a bonded elliptical stylus and 4.0mV output.

The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output. The SCRATCH is intended especially for scratching and back-cueing.
Variant: Scratch
Shape: Spherical
Type: Moving Magnet;Concorde;Cartridge
Frequency Range: 20 Hz - 18 kHz
Channel separation at 1 kHz: 22 dB
Recommended load capacitance: 200-400 pF
Tracking ability at 315 Hz: 100 μm
Tracking Force: 3g - 5g
Colour: White
Tracking force recommended: 4g
Made in: Japan
Weight: 18,5 g
Impedance (Ohm): 1200.0
Voltage: 10 mV
Recommended load resistance: 47 kOhm…

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding. At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
Colour: Red
Recommended load resistance: 47 kOhm
Variant: Digital
Made in: Japan
Weight: 18,5 g
Channel separation at 1 kHz: 22 dB
Type: Concorde;Cartridge;Moving Magnet
Impedance (Ohm): 1200.0
Recommended load capacitance: 200-400 pF
Tracking Force: 3g - 5g
Voltage: 10 mV
Tracking ability at 315 Hz: 100 μm
Tracking force recommended: 4g
Frequency Range: 20 Hz - 18 kHz
Shape: Spherical

The Ortofon 2M Red Premounted MM Cartridge comes attached to the Ortofon SH-4 Headshell and is a great choice for no-fuss installation. This option prioritises convenience with an SME connector that is compatible with the majority of modern-day tonearms and turntables.The 2M Red has been meticulously engineered with a precision-machined elliptical diamond stylus tip mounted on a cantilever with split pole magnets that interact with an intricate copper coil system. This moving magnet design enables the engine to amplify the output to 5.5 mV ensuring remarkable sonic accuracy. When it comes to audio output the 2M Red delivers an open and dynamic sound subtly imbued with warmth. It also exhibits …

2.7 x 0.26 mil Shibata replacement stylus for AT-VM95SH cartridges.
Made in: China

Replacement cartridge with half-inch mount that is specially designed for the needs of DJs and features a highly-rigid polyphenylene sulfide (PPS)/glass fibre body and a tracking force of 2 to 4 grams (3 grams standard). It also offers a powerful output level of 6 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tip tracks the record groove with high accuracy for outstanding audio reproduction. Tapered aluminium cantilever, stainless wire suspension and double-layered rubber dumper further ensure precise tracking and channel separation (22 dB at 1 kHz). The cartridge is also specifically designed to provide maximum visibility of the stylus tip. Frequency response: 20 Hz-20 kHz. Recommended …

Set includes AT-VM95EN cartridge from VM95 series mounted on AT-HS6BK headshell.
VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series …

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
Type: Moving Magnet;Cartridge;Concorde
Variant: Club
Tracking force recommended: 3g
Recommended load resistance: 47 kOhm
Impedance (Ohm): 1000.0
Tracking ability at 315 Hz: 100 μm
Recommended load capacitance: 200-600 pF
Made in: Japan
Voltage: 8 mV
Weight (g): 18.5
Tracking Force: 2g - 4g
Shape: Elliptical
Colour: Black
Frequency Range: 20 Hz - 20 kHz

Dual Moving Magnet Mono Cartridge for Shellac or Phonograph records. It is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused “center” sound image that stereo cartridges can’t provide. The stylus’s 3.0 mil curvature radius makes it an excellent choice for playing 78 RPM records from a wide variety of eras. Includes mounting hardware.
Colour: Grey;Black
Suitable for Brand: Ordinary Turntable Brands
Type: Mono;Dual Moving Magnet Cartridge
Material: Plastic;Aluminium
Suitable for: Turntables;Phonograph Records;Shellac Records
Application: Hi-Fi
Package Contents: Nut;Washer;Cartridge Installation Screw
Variant: VM670SP<…

The Twin MIX is a general-purpose model for scratch and back-cueing. Include 2x Concorde mkII Mix, brush and case.
Made in: Japan
Frequency Range: 20 Hz - 20 kHz
Recommended load resistance: 47 kOhm
Impedance (Ohm): 700.0
Tracking ability at 315 Hz: 100 μm
Channel balance at 1 kHz: 1,5
Voltage: 6 mV
Tracking Force: 2g - 4g
Channel separation at 1 kHz: 20
Type: Cartridge;Concorde;Moving Magnet
Colour: Black
Recommended load capacitance: 200-600 pF
Tracking force recommended: 3g
Weight: 18,5 g
Shape: Spherical
Variant: Twin Mix

Goldring introduces its flagship E Series moving magnet cartridge: E4. Designed as the ultimate upgrade for any modern budget or midrange turntable, E4 represents the pinnacle of E Series engineering and performance.E4 is designed to be compatible with all medium-to-high-mass tonearms of the type found on the majority of budget to midrange turntables. And because it’s constructed using the same high-quality core as the other E Series cartridges in the range, E4 is ideal both for those who wish to upgrade an obsolete cartridge in its entirety or those who want to boost the performance of their existing E Series cartridge by replacing the stylus
Shape: Nude Eliptical
Internal inductance: 400 mH…

The Ortofon 2M Blue Cartridge is a precise and accurate sound retrieval solution faithfully playing the recorded sound without colouration. It boasts a high-standard polished nude elliptical diamond stylus ensuring a solid sonic performance with dynamic tracking of the record groove. The cartridge design has been optimised for easy mounting onto a tonearm making it well-suited to most common turntables on the market. A step up from the Red the 2M Blue offers more dynamics and resolution creating a more open sound that reproduces more details. The interchangeable styli of the 2M range add to the versatility of this cartridge allowing for customisation and upgrade according to your needs. The …

The 2M series of cartridges feature Ortofons trademark split pole pins an invention which enables moving magnet cartridges to have a flat frequency response as with a moving coil cartridge.