Turntable Cartridges

The VM520EB/H combo kit includes the VM520EB elliptical bonded dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2"-mount headshell.
Recommended load resistance: 47 kOhm
Application: Hi-Fi
Тype: Dual Moving Magnet Cartridge;Stereo
Colour: Black;Blue
Made in: Japan
Material: Aluminium
Variant: VM520EB/H
Package Contents: Headshell;Washer;Nut;Cartridge Installation Screw
Tracking force recommended: 2 g
Shape: Elliptical
Channel separation at 1 kHz: 27 dB
Compliance: 8 x 10-6 cm (100Hz)
Voltage: 4 mV
Suitable for Brand: Ordinary Turntable Brands
Tracking Force: 1,8g - 2,2g
Channel balance at 1 kHz: 1,5 dB
Weight: 6,4 g
Frequency Range: 20 Hz - 23 kHz
Weight (g): 0.0
Stylus tip r…

The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.
Voltage: 3.5 mV
Shape: Microlinear
Impedance (Ohm): 485.0
Tracking Force: 1,8g - 2,2g
Recommended load capacitance: 100-200 pF
Mounting: 1/2"
Тype: VM Stereo Dual Magnet;Cartridge
Colour: Red;Black
Made in: China
Recommended load resistance: 47 kOhm
Frequency Range: 20 Hz - 25 kHz
Tracking force recommended: 2 g
Channel separation at 1 kHz…

A genuine 20 Replacement stylus for the OM range of Ortofon cartridges which includes an elliptical shaped stylus for improved balance and less distortion.

2.7 x 0.26 mil Shibata replacement stylus for AT-VM95SH cartridges.
Made in: China

Dual Moving Magnet Mono Cartridge for Shellac or Phonograph records. It is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused “center” sound image that stereo cartridges can’t provide. The stylus’s 3.0 mil curvature radius makes it an excellent choice for playing 78 RPM records from a wide variety of eras. Includes mounting hardware.
Тype: Dual Moving Magnet Cartridge;Mono
Colour: Black;Grey
Recommended load resistance: 47 kOhm
Shape: Conical Bonded (3mil)
Frequency Range: 20 Hz - 20 kHz
Package Contents: Washer;Cartridge Installation Screw;Nut
Application: Hi-Fi
Tracking force recommended: 5 g
Material: Plastic;Aluminium…

The Twin MIX is a general-purpose model for scratch and back-cueing. Include 2x Concorde mkII Mix, brush and case.
Tracking ability at 315 Hz: 100 μm
Тype: Concorde;Moving Magnet;Cartridge
Made in: Japan
Recommended load capacitance: 200-600 pF
Variant: Twin Mix
Impedance (Ohm): 700.0
Channel balance at 1 kHz: 1,5
Channel separation at 1 kHz: 20
Weight: 18,5 g
Frequency Range: 20 Hz - 20 kHz
Colour: Black
Recommended load resistance: 47 kOhm
Shape: Spherical
Voltage: 6 mV
Tracking Force: 2g - 4g
Tracking force recommended: 3g

This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.Specifications:Model: AT-VM95SHType: VM Stereo Dual MagnetMounting: 1/2” centresFrequency Response: 20 - 25,000 HzChannel Separation: 23 dB (1 kHz)Output Channel Balance: 1.5 dB (1 kHz)Output Voltage: 3.5 mV (…

Goldring introduces its flagship E Series moving magnet cartridge: E4. Designed as the ultimate upgrade for any modern budget or midrange turntable, E4 represents the pinnacle of E Series engineering and performance.E4 is designed to be compatible with all medium-to-high-mass tonearms of the type found on the majority of budget to midrange turntables. And because it’s constructed using the same high-quality core as the other E Series cartridges in the range, E4 is ideal both for those who wish to upgrade an obsolete cartridge in its entirety or those who want to boost the performance of their existing E Series cartridge by replacing the stylus
Package Quantity (pcs): 1
Compliance: 22 µm/mN
…

The Ortofon 2M Blue Cartridge is a precise and accurate sound retrieval solution faithfully playing the recorded sound without colouration. It boasts a high-standard polished nude elliptical diamond stylus ensuring a solid sonic performance with dynamic tracking of the record groove. The cartridge design has been optimised for easy mounting onto a tonearm making it well-suited to most common turntables on the market. A step up from the Red the 2M Blue offers more dynamics and resolution creating a more open sound that reproduces more details. The interchangeable styli of the 2M range add to the versatility of this cartridge allowing for customisation and upgrade according to your needs. The …

The replacement stylus for VM540ML and VM740ML. 2.2 x 0.12 mil MicroLine stylus.
Variant: VMN40ML
Tracking force recommended: 2 g
Application: Hi-Fi
Material: Plastic
Тype: Replacement Stylus
Suitable for Brand: Audio-Technica
Made in: Japan
Package Quantity (pcs): 1
Shape: MicroLine
Suitable for: VM540ML;VM740ML
Tracking Force: 1,8g - 2,2g
Colour: Red

The 2M series of cartridges feature Ortofons trademark split pole pins an invention which enables moving magnet cartridges to have a flat frequency response as with a moving coil cartridge.

The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling. The DJ is great for any style of music.
Recommended load capacitance: 200-600 pF
Variant: Twin DJ
Тype: Moving Magnet;Concorde;Cartridge
Made in: Japan
Tracking ability at 315 Hz: 100 μm
Channel separation at 1 kHz: 22 dB
Voltage: 6 mV
Frequency Range: 20 Hz - 20 kHz
Tracking Force: 3g - 5g
Tracking force recommended: 4g
Shape: Spherical
Weight: 18,5 g
Recommended load resistance: 47 kOhm
Colour: Blue

The Olympia brings another level of acoustic refinement to the mix with an upgraded stylus and cantilever assembly allowing for more dynamic punch and improved frequency response during playback.

Set includes AT-VM95SH cartridge from VM95 series mounted on AT-HS6BK headshell.
VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series …

The AT-OC9XEB is an excellent affordable introduction to the characteristics that is moving coil. Since its introduction more than 30 years ago Audio-Technicas pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency expression of sound and precise construction. 

Dual moving magnet cartridge with MicroLine stylus. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware.
Tracking Force: 1,8g - 2,2g
Impedance (Ohm): 2700.0
Recommended load capacitance: 100-200 pF
Made in: Ja…

The Ortofon Concorde Music Blue Moving Magnet Cartridge featuring a Nude Elliptical diamond stylus delivers greater definition than its predecessor the Concorde Music Red. Mounted on an aluminium cantilever with Ortofons specially developed rubber compound suspension the stylus achieves superior precision and responsiveness in groove tracking. This translates to a notably richer and clearer music experience. Ortofons aim with the Concorde Music range was to streamline and standardise cartridge design for quick and tool-free installation featuring a bayonet/SME type connector compatible with any S-shaped tonearm.This standardisation means you can upgrade to or from any Concorde Music stylus without …

The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output. The SCRATCH is intended especially for scratching and back-cueing.
Colour: White
Тype: Cartridge;Moving Magnet;Concorde
Tracking force recommended: 4g
Shape: Spherical
Frequency Range: 20 Hz - 18 kHz
Tracking Force: 3g - 5g
Weight: 18,5 g
Recommended load resistance: 47 kOhm
Tracking ability at 315 Hz: 100 μm
Recommended load capacitance: 200-400 pF
Made in: Japan
Variant: Twin Scratch
Voltage: 10 mV
Impedance (Ohm): 1200.0
Channel separation at 1 kHz: 22 dB…

Stylus

A genuine Stylus 30 Replacement stylus for the OM range of Ortofon cartridges which includes an elliptical shaped stylus for improved balance and less distortion.

Even the finest diamond stylus becomes worn after an extended period of play.The styli for the VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. The new VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding. At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
Тype: Concorde;Moving Magnet;Cartridge
Tracking ability at 315 Hz: 100 μm
Recommended load capacitance: 200-400 pF
Channel separation at 1 kHz: 22 dB
Made in: Japan
Voltage: 10 mV
Impedance (Ohm): 1200.0
Variant: Twin Digital
Shape: Spherical
Frequency Range: 20 Hz - 18 kHz
Recommended load resistance: 47 kOhm
Weight: 18,5 g
Colour: Red
Tracking force recommended: 4g
Tracking Force: 3g - 5g

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
Tracking Force: 2g - 4g
Тype: Cartridge;Moving Magnet;Concorde
Colour: Black
Voltage: 8 mV
Frequency Range: 20 Hz - 20 kHz
Weight: 18,5 g
Frequency Response: 20 Hz - 20 kHz
Tracking force recommended: 3g
Shape: Elliptical
Recommended load resistance: 47 kOhm
Made in: Japan
Tracking ability at 315 Hz: 100 μm
Recommended load capacitance: 200-600 pF
Variant: Twin Club

The Ortofon Concorde Music Bronze Replacement Stylus features a Nude Fine Line diamond tip that more accurately tracks record grooves. Compatible with all Concorde cartridge bodies and as the mid-point of the range the Bronze stylus offers a cost-effective upgrade path from the Red or Blue without replacing the entire unit.Its tool-free installation process makes upgrading or replacement easy and efficient. Ideal for those who value high-fidelity sound without the hassle of screws and wires the Concorde Music Bronze introduces dynamic acoustic performance to your audio system.