Hand Planes

The IRWIN Record 778 rebate plane has two cutter positions, one for normal rebating work and a forward position for planing into corners and difficult positions.The adjustable fence supplied can be used on either side of the plane to accurately control the size of the rebate.The cast iron body has an accurately ground base.Five thread depth adjusting screws for precision control of shaving thickness. Cutter Width: 38mm (1.1/2 in).Length: 215mm (8.1/2 in).Additional Information:• Plane Type: No.778• Cutter Width (mm): 38

The Jointer Plane performs a dual role between stock removal and accurately truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seating to reduce chatter. Features: For stock removal, truing up long edges and levelling wide boards Machined cast iron base Fully adjustable Machined frog and cutter seating to reduce chatter Specifications: Dimensions: H:16.3 x W:59.8 x D:9.5 cm Colour: Silver Guarantee:1 year Material: Metal Model Number: STA112007

The Stanley 12-136 Sweetheart Premium No.4 Bench Plane is a great choice for woodworking projects of all types and sizes. The base and frog are cast as one to allow the plane to run smoothly over the stock with little to no chatter and a heavier body for increased performance. Features: For smoothing and general joinery Heavier section machined cast iron base FSC cherry wood handle and knob A2 steel blade for increased edge retention Solid brass adjustments Specifications: Dimensions: H:17.2 x W:31.2 x D:8.4 cm Colour: Multi Guarantee:1 year Material: Metal Model Number: STA112136

The Stanley Sweetheart 12-137 No62 Low Angle Jack Plane is made from extra thick 3/16in A2 steel for superior edge retention, a one-piece precision ground frog and base casting, and a limited lifetime warranty. Features: For smoothing or as a jointer plane on short boards Precision ground one-piece frog and base Cherry wood handle and knob Blade installed bevel up without a cap iron Extra thick 3/16in A2 steel blade Specifications: Dimensions: H:16.8 x W:38.5 x D:7.9 cm Colour: Multi Guarantee:1 year Material: Metal Model Number: STA112137

The No.6 Bailey Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. Features: For stock removal, truing up long edges and levelling wide boards Machined cast iron base The cap design curves shavings, preventing clogging Fully adjustable Specifications: Dimensions: H:16.2 x W:47.4 x D:9.0 cm Colour: Silver Guarantee:1 year Material: Metal Model Number: STA112006

No. 4 Bailey The bases of the planes are manufactured from cast fine grey iron. The unmachined parts are coated with a durable, high quality epoxy coating. High carbon steel polished and precision ground blade, brass adjusting nut and contoured handle. For general purpose applications and fine finishing of high quality work.

IRWIN Record Jack Plane is manufactured to uncompromisingly high standards and is suitable for both hard and soft woods. Supplied with a 2in tungsten vanadium cutter blade. Designed for the initial preparation of rough timber the long base bridging undulations which a shorter plane would tend to follow. RECSP5: Plastic Handle (Economy).REC05: Wooden Handle. Width: 50mm (2in).Length: 355mm (14in).IRWIN Record Jack Plane is manufactured to uncompromisingly high standards. The planes feature tungsten vanadium cutter blade accurately machined blade setting full adjustments cast iron base frog and lever cap and traditional brass adjusting nut.PTDREC05

The Faithfull Shoulder Bullnose Rebate Plane is a versatile, 3-in-1 low angle plane, combining the functions of: a shoulder plane with the front extension fitted; a bullnose plane using the small nose section; or a chisel plane with the nose removed. The full width blade also allows use as a rebate plane and is easy to set using the knurled adjustment screw.Presented in a hinged wooden storage box. Additional Information:• Cutter Width (mm): 27

This Stanley No.5 Bailey Professional Jack Bench Plane is a general-purpose plane for workshop, site, or fine finishing. It has a chrome carbon steel cutter hardened and tampered to retain a keen cutting edge. It has fingertip adjustment for depth of cut and cutter alignment, and fully adjustable frog for all tasks and timber types.This plane has a kidney shaped lever cap screw hole preventing accidental slippage of the cutter. It is a professional fully adjustable metal plane with a precision cast fine grey iron base for stability and wear resistance. The plane has a tight-fitting spring steel cap iron for a perfect shaving flow. The handle and knob are made of virtually unbreakable polypropylene …

IRWIN Record 060 1/2 Block Plane is specially made to deal with plastic laminates and other man-made materials besides wood. Cutter set at 12.5° with mouth adjustments for coarse or fine work and end grain. Fully adjustable for depth of cut with cutter held firmly by lever and cam. Cutter Width: 42mm (1.5/8 in).Length: 152mm (6in).Additional Information:• Plane Type: No.60.1/2• Cutter Width (mm): 42

IRWIN Record 09 1/2 Adjustable Block Plane ideal for end grain and general-purpose finishing. Fully adjustable for depth of cut with a screw adjusted cutter head by lever and cam. Lateral adjustment and mouth adjustments for coarseor fine work and a 21° cutter angle. Cutter Width: 42mm (1.5/8 in).Length: 152mm (6 in).Additional Information:• Plane Type: No.9.1/2• Cutter Width (mm): 42

This rebate plane is made from fine grey iron with all working surfaces accurately machined for precise results. Two cutter positions for regular and bull nose work. The cutter is adjustable for depth of cut in the rear position. To accurately control dimensions of the rebate, an adjustable fence depth gauge is supplied. A cutting spur is also provided for cross grain work. Cutter Width: 38mm (1.1/2in).Length: 250mm (10in).Additional Information:• Plane Type: No.78• Cutter Width (mm): 38

IRWIN Record Smoothing Plane is manufactured to uncompromisingly high standards and is suitable for both hard and soft woods. Supplied with a tungsten vanadium cutter blade. RECSP4: Plastic Handle (Economy).REC04: Wooden Handle. Width: 50mm (2in.)Length: 245mm (9.3/4in).IRWIN Record planes feature tungsten vanadium cutter blade, accurately machined blade setting, full adjustments, selected hardwood handle and knob, cast iron base frog and lever cap, and traditional brass adjusting nut. Smoothing Planes: The most frequently purchased plane used for final finishing work and ideal for general work.Additional Information:• Plane Type: No.4• Cutter Width (mm): 50

Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length. 10.1/4in.Cutter Width. 2.3/8in.Additional Information:• Plane Type: No.4.1/2• Cutter Width (mm): 60

Professional smoothing planes, designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. Features: For final finishing of cabinet and general joinery work Machined cast iron base Black epoxy finish handle with plated parts Chrome carbon cutter Specifications: Dimensions: H:14.7 x W:25.9 x D:7.8 cm Colour: Silver Guarantee:1 year Material: Metal Model Number: STA112004

Stanley 5-12-020 Block Plane with Pouch 6. 1/4 Inch / 160mm The Stanley 5-12-020 Block Plane is fully adjustable for depth of cut, cutter alignment and mouth opening. With a 40mm blade, it is ideal for end grain and plastic laminates. This model comes with a pouch for convenient storage. Features:
- Black lacquer finish
- Block Plane Fully Adjustable Low Angle
- For end grain and plastic laminates
- Fully adjustable
- Iron inclined at 21°
- Low angle cutter
- Sole and rectified cheeks of barrel Specification:
- Model:  5-12-020
- Iron Width:  40mm
- Length: 160mm
- Iron Length:  160mm

Stanley 5-12-060 Block Plane with Pouch 6. 1/4 Inch/160mm The Stanley 5-12-060 Block Plane is fully adjustable for depth of cut, cutter alignment and mouth opening. With a 34mm blade, it is ideal for end grain and plastic laminates. This model comes with a pouch for convenient storage. Features:
- Base : 150 mm
- Black laquer finish
- Block Plane Fully Adjustable Low Angle
- For end grain and plastic laminates
- Fully adjustable
- Iron : 34 mm
- Iron inclined at 13.5°
- Low angle cutter
- Sole and rectified cheeks of barrel Specification:
- Model: 5-12-060
- Iron Width: 34mm
- Iron Length: 150mm
- Iron gradient: 13.5 deg…

Used for smoothing and final finishing. Featuring a robust level cap designed to lock down on three points for secure location of the cutting iron. Razor sharp tungsten vanadium steel cutting iron to cut even the hardest of woods. Impact resistant ABS resin handle and knob for comfort and control. Traditional adjusting nut for fine seating. Length: 245mm, Blade width: 50mm

IRWIN Record Jack Plane is manufactured to uncompromisingly high standards and is suitable for both hard and soft woods. Supplied with a 2in tungsten vanadium cutter blade. Designed for the initial preparation of rough timber, the long base bridging undulations which a shorter plane would tend to follow. RECSP5: Plastic Handle (Economy).REC05: Wooden Handle. Width: 50mm (2in).Length: 355mm (14in).IRWIN Record Jack Economy Plane, with tungsten vanadium cutter is competitively priced and features, screw adjustment for depth of cut and lever for lateral adjustment. Pre-packed on a strong display card with user instructions.Additional Information:• Plane Type: No.5• Cutter Width (mm): …

The Faithfull 778 plane is designed to cut rebates up to 38mm (11/2in) and is guided by an adjustable fence supported on two guide rods. The rods can be pushed through which allows the fence to be used on either side of the plane. A twin position cutter enhances the versatility of this plane. The plane features a quality cast iron body with accurately ground base, two position cutter for rebate and bull nose work, a double sided adjustable fence, a spur for cross grain cutting and is supplied with an accurate depth stop. With the cutter in the centre position, the plane can be used for cutting rebates, and has a fine screw adjuster for precise control of the depth of cut. With the cutter moved …

The Faithfull planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. The 60 1/2 block plane with a 35mm cutter width, set at a low angle of 13 1/2º making it particularly effective on end grain and plastic laminates. The 9.1/2 block plane with a 42mm cutter width, set at an angle of 21º. Ideal for end grain and general-purpose finishing. The Faithfull FAIPLANEBPS 60 1/2 and 9 1/2 block plane set is presented in a hinged wooden box.Additional Information:• …

The Faithfull No.7 Jointer plane is designed for stock removal and truing long edges or levelling wide boards. The plane features a precision ground base and sides with a traditional hardwood handle and knob for comfort and high quality brass fittings precision machined for accurate adjustment. The plane is suitable for use on both hard and soft woods. Cutter Width: 60mm (2.3/8in).Overall Length: 560mm (22in).Additional Information:• Plane Type: No.7• Cutter Width (mm): 60

The Bahco BP-40 Block Plane is ideal for end grain and general-purpose fine finishing work. The design enables easy adjustment of the planing depth. Supplied with a pouch for easy storage and transportation. Specification: Cutter Width: 40mm (1.5/8in)Overall Length: 160mm (6.1/4in)Additional Information:• Cutter Width (mm): 40