Wheel Bolts & Locking Bolts

Bimecc Tuner Wheel Bolt - M12x1.25 60 Degree Taper 45mm Length VSTB45-D20

Delivery: in United Kingdom

Report

Bimecc Tuner Wheel Bolts are designed to fit into the smaller holes on some after-market wheels, particularly multi-drilled wheels. We list these by Outer-Diameter so you can choose the bolts you need more→to fit into the space. They then require a special adaptor to do or undo.Fit limited spacesPerfect for multi-drilled wheelsRange of out-diameters availableDesigned to fit the limited space available in multi-drilled wheels these Bimecc Tuner Wheel Bolts fit narrow spaces perfectly. 20mm and 23mm outer diameter bolts are available.Key is supplied separately.

Grayston Wheel Bolt - M14 x 1.25, Fixed 60 Degree, 40mm Long, 17mm Head SB

4.24Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Grayston Wheel Bolts are available in a large range of thread and fitting options to suit most vehicle and wheel fitments. These bolts are ideal for when fitting non standard wheels to a vehicle where more→a longer length bolt or one with a different seat is required.Ideal for fitting non original wheels to a vehicleWide range of thread length and seat typesZinc plated steel for corrosion resistanceOptions explainedLoose 60 Degree and Loose Radius seat options refer to the bolt having a separate seating washer.Variable 60 Degree bolts allow for variation in wheel PCD's (Eg 108/110mm or 98/100mm). This allows wheels with a slightly different PCD to be fitted to the car.Length is measurement of

Performance Wheels Coloured Tuner Style Wheel Nut - M12 x 1.5, Red, Red NU

4.26Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

These bright coloured tuner style wheel nuts from Performance Wheels offer the style of an anodised wheel nut, but with the strength and low cost of a steel wheel nut. The spline type fitment gives a more→smooth, stylish appearance which also gives an element of security against wheel theft. A spline key is required for tightening and loosening.Available in a range of different sizes to suit most fitments and a choice of coloursA great item to finish off a smart set of wheelsAll Performance Wheels Coloured Wheel Nuts are 60 degree taper fitment to suit most aftermarket type wheels.Supplied individually

Grayston Revolution/Mamba Style Sleeve Nut With Flat Washer - Revolution a

4.28Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Sleeve wheel nuts to suit classic Revolution and Mamba style wheels which require a long sleeve and and a flat seating washer. Washers are included.Available in the following options:Option 1: 3/8" UN more→F thread , 11/16" OD sleeve x 30mm longOption 2: 3/8" UNF thread, 9/16" OD sleeve x 30mm longOption 3: 7/16" UNF thread, 11/16" OD sleeve x 30mm longOption 4: M12 x 1.5 thread, 11/16" OD sleeve x 30mm long

Bimecc Wheel Bolt - M14x1.5 60 Degree Taper 17mm Hex 45mm Length C17D45-ZN

4.40Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Bimec Wheel Bolt are designed and made with the most advanced high-precision equipment to achieve the highest quality product. Made using a wholly automated process for precise repetition every time, more→these Wheel Bolts are designed to last.High qualityWide range of fittingsCorrosion resistantThe Bimec Wheel Bolt comes in a range of fittings and in a choice of taper or ball seat suits most wheel types. If you are uncertain, please contact our Wheel and Tyre Department for further information.Supplied as a single piece

Bimecc Tuner Wheel Bolt - M12x1.25 23mm OD 50mm Length VSTB50

4.58Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Bimecc Tuner Wheel Bolts are designed to fit into the smaller holes on some after-market wheels, particularly multi-drilled wheels. We list these by Outer-Diameter so you can choose the bolts you need more→to fit into the space. They then require a special adaptor to do or undo.Fit limited spacesPerfect for multi-drilled wheelsRange of out-diameters availableDesigned to fit the limited space available in multi-drilled wheels these Bimecc Tuner Wheel Bolts fit narrow spaces perfectly. 20mm and 23mm outer diameter bolts are available.Key is supplied separately.

Demon Tweeks Competition Wheel Stud - 14 x 1.5mm, VW +32mm ,67mm Long SS44

4.62Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Demon Tweeks Competition Wheel Studs are ideal for replacing damaged or worn original studs, or the longer versions can be used with spacers. They are designed to be used where studs are fitted origin more→ally - they are not meant as conversion studding.Available in the following sizes:3/8"" UNF suit Mini, Morris Minor, Midget, Sprite etc (10.3mm spline)Standard, 35mm longStandard + 15mm, 50mm longStandard + 25mm, 60mm longStandard + 45mm, 80mm long7/16"" UNF Ford (13.1mm spline)Standard + 13mm, 43mm longStandard + 25mm, 63mm long12 x 1.5mm Ford (13.1mm spline)Standard + 13mm, 47mm longStandard + 18mm, 57mm longStandard + 25mm, 63mm long12 x 1.5mm Vauxhall/Opel, Mitsubishi, Toyota, Ford Escort

Grayston Wolfrace Style Sleeve Wheel Nut - Option 4 SN51

4.64Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

These wheel nuts from Grayston are specifically designed to fit classic Wolfrace slot mag wheels which require a sleeve fitting with a tapered washer.Available in different thread options:Option 1: 1/ more→2" UNF thread with 11/16" (17.4mm) OD sleeveOption 2: M12 x 1.5 thread with 41/64" (16.3mm) OD sleeveOption 3: 7/16" UNF thread with 11/16" (17.4mm) OD sleeveOption 4: 3/8" UNF thread with 41/64" (16.3mm) OD sleeveOption 5: M12 x 1.25 thread with 41/64" (16.3mm) OD sleeveOption 6: M12 x 1.5 thread with 11/16" (17.4mm) OD sleeveOption 7: 7/16" UNF thread with 41/64" (16.3mm) OD sleeveOption 8: M14 x 1.5 thread with 11/116" (17.4mm) OD Sleeve

Grayston Wolfrace Style Sleeve Wheel Nut - 12mm 1.5 41/64" Shank Sleeve Nu

4.64Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

These wheel nuts from Grayston are specifically designed to fit classic Wolfrace slot mag wheels which require a sleeve fitting with a tapered washer.Available in different thread options:Option 1: 1/ more→2" UNF thread with 11/16" (17.4mm) OD sleeveOption 2: M12 x 1.5 thread with 41/64" (16.3mm) OD sleeveOption 3: 7/16" UNF thread with 11/16" (17.4mm) OD sleeveOption 4: 3/8" UNF thread with 41/64" (16.3mm) OD sleeveOption 5: M12 x 1.25 thread with 41/64" (16.3mm) OD sleeveOption 6: M12 x 1.5 thread with 11/16" (17.4mm) OD sleeveOption 7: 7/16" UNF thread with 41/64" (16.3mm) OD sleeveOption 8: M14 x 1.5 thread with 11/116" (17.4mm) OD Sleeve

Grayston Peugeot Type Wheel Nut - Open End SN61

4.87Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Grayston Peugeot Type Wheel Nuts are suitable for OE Peugeot wheels and available as open or closed end styles. Zinc plated for good looks and durability.Available in M12 x 1.25mm thread to suit Peuge more→ot cars and also in M12 x 1.5mm thread to allow fitment of Peugeot wheels to Ford cars, All come complete with captive flat washer.Sold individually.

Grayston Mitsubishi/Toyota Chrome Sleeve Nut - 12 x 1.5mm, 12mm Length SN6

5.29Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Original equipment style closed back wheel nuts for Mitsubishi and Toyota / Lexus fitment.Dimensions -M12 x 1,5 Thread18.4mm Diameter Shank, 12mm Long

Bimecc Wheel Bolt - M14x1.25 60 Degree Taper 27mm Length 17mm Hex Black Bo

5.35Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Bimec Wheel Bolt are designed and made with the most advanced high-precision equipment to achieve the highest quality product. Made using a wholly automated process for precise repetition every time, more→these Wheel Bolts are designed to last.High qualityWide range of fittingsCorrosion resistantThe Bimec Wheel Bolt comes in a range of fittings and in a choice of taper or ball seat suits most wheel types. If you are uncertain, please contact our Wheel and Tyre Department for further information.Supplied as a single piece

Grayston OE Style Sleeve Nut - Jaguar OE Style Flat Washer 1/2" UNF SN47

5.44Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Grayston offer these OE Type Wheel Nuts for cars with very specific wheel fitment.Fully compatible with original equipment wheels1/2" UNF Jaguar sleeve nut with captive flat washer, stainless steel cap.

Bimecc Wheel Bolt - M14x1.5 Radius 50mm Length 17mm Hex S17D50

5.93Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

Bimec Wheel Bolt are designed and made with the most advanced high-precision equipment to achieve the highest quality product. Made using a wholly automated process for precise repetition every time, more→these Wheel Bolts are designed to last.High qualityWide range of fittingsCorrosion resistantThe Bimec Wheel Bolt comes in a range of fittings and in a choice of taper or ball seat suits most wheel types. If you are uncertain, please contact our Wheel and Tyre Department for further information.Supplied as a single piece

A I Tech Coppered Steel Open Wheel Nut - 12 x 1.25mm, 60 Degree Taper, 19m

7.45Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

A I Tech Coppered Steel Open Wheel Nuts are available in a range of thread sizes and in a choice of 60 degree taper or radius type seats, or there is a 12 x 1.25mm flat seat nut available.Manufactured more→from high tensile steel, they are built to perform in the harshest of conditions and ideal for use on competition cars - race or rally. The copper surface coating means the nut is more secure when tight but is easier and smoother to take off or screw on, and will not corrode.The ultimate nuts for the most discerning competitor.Sold individually

A I Tech Coppered Steel Open Wheel Nut - 14 x 1.5mm, 60 Degree Taper, 19mm

7.51Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

A I Tech Coppered Steel Open Wheel Nuts are available in a range of thread sizes and in a choice of 60 degree taper or radius type seats, or there is a 12 x 1.25mm flat seat nut available.Manufactured more→from high tensile steel, they are built to perform in the harshest of conditions and ideal for use on competition cars - race or rally. The copper surface coating means the nut is more secure when tight but is easier and smoother to take off or screw on, and will not corrode.The ultimate nuts for the most discerning competitor.Sold individually

A I Tech Coppered Steel Open Wheel Nut - 12x1.5mm-60 Degree Taper-19mm Hea

7.64Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

A I Tech Coppered Steel Open Wheel Nuts are available in a range of thread sizes and in a choice of 60 degree taper or radius type seats, or there is a 12 x 1.25mm flat seat nut available.Manufactured more→from high tensile steel, they are built to perform in the harshest of conditions and ideal for use on competition cars - race or rally. The copper surface coating means the nut is more secure when tight but is easier and smoother to take off or screw on, and will not corrode.The ultimate nuts for the most discerning competitor.Sold individually

A I Tech Coppered Steel Open Wheel Nut - 12 x 1.25mm, Radius Seat, 17mm He

7.74Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

A I Tech Coppered Steel Open Wheel Nuts are available in a range of thread sizes and in a choice of 60 degree taper or radius type seats, or there is a 12 x 1.25mm flat seat nut available.Manufactured more→from high tensile steel, they are built to perform in the harshest of conditions and ideal for use on competition cars - race or rally. The copper surface coating means the nut is more secure when tight but is easier and smoother to take off or screw on, and will not corrode.The ultimate nuts for the most discerning competitor.Sold individually

A I Tech Coppered Steel Open Wheel Nut - 14 x 1.5mm, Radius Seat, 19mm Hea

7.90Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

A I Tech Coppered Steel Open Wheel Nuts are available in a range of thread sizes and in a choice of 60 degree taper or radius type seats, or there is a 12 x 1.25mm flat seat nut available.Manufactured more→from high tensile steel, they are built to perform in the harshest of conditions and ideal for use on competition cars - race or rally. The copper surface coating means the nut is more secure when tight but is easier and smoother to take off or screw on, and will not corrode.The ultimate nuts for the most discerning competitor.Sold individually

A I Tech Coppered Steel Open Wheel Nut - 12 x 1.25mm, 60 Degree Taper, 17m

7.90Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

A I Tech Coppered Steel Open Wheel Nuts are available in a range of thread sizes and in a choice of 60 degree taper or radius type seats, or there is a 12 x 1.25mm flat seat nut available.Manufactured more→from high tensile steel, they are built to perform in the harshest of conditions and ideal for use on competition cars - race or rally. The copper surface coating means the nut is more secure when tight but is easier and smoother to take off or screw on, and will not corrode.The ultimate nuts for the most discerning competitor.Sold individually

LMA Wheel Stud - 90mm, M12 x 1.5 923/90

8.29Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications

LMA Wheel Stud - 68mm, M12 x 1.5 923/68

8.29Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications

LMA Wheel Stud - 82mm, M14 x 1.5 925/82

8.29Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications

LMA Wheel Stud - 82mm, M12 x 1.25 922/82

8.29Buy!
£

Demon-tweeks.com

Delivery: in United Kingdom

Report

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications