Diamond Core Bits & Milling Cutters

1/4" Biscuit No. 20 TCT Router Bit1 x TCT Router Bit, 1/4" Biscuit, No.20

2x Longer Lifetime - The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, more→it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. Features and Benefits • Long Life • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt …

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications • Bearing Dia Metric: 33 • Sawbore: 12

These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imper more→ial: 1/8 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 61.5 • Radius 1 Metric: 1.6 • Radius 1 Imperial: 1/16

Milwaukee's Shockwave range of power tool accessories feature 1/4" hex shanks and are impact rated, meaning they can be used in impact drivers as well as standard drill drivers. Shockwave impact duty more→hole saws have an 8% cobalt construction for durability, and feature ejection springs for automatic release of the core once the hole is drilled out. These hole saws are ideal for use on metal and plastics. Specifications • Diameter: 32mm Features and Benefits • Optimised for use with cordless machines • 8 teeth per inch for smooth, burr-free holes • Thin wall construction for minimal resistance • Shallow cup optimised for drilling thin metal • 1/4" hex shank for direct …

Expert Tough Material For Long Life Cutting Holes In Multi Material Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind U more→ntil Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again. The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features:- Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teet…

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 13mm • Shank Diameter: 12mm • Length of Cut: 50mm • Overall Length: 95mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Type C: Ideal for grooving, edge-routing and other general purpose routing tasks. Suitable for hand-held and table mounted routers and CNC machines. Cuts hardwood, softwood, plywood and wood composite more→s A specially formulated, highly compact Titanium Cobalt Carbide (TiCo), engineered and manufactured by freud. It provides a sharper edge and flawless finish with a dramatically longer cutting life. Perma shield technology is a non-stick coating formulation that withstands the toughest applications. It provides thermal insulation, protects from corrosion and eliminates resin build-up, reducing downtime for cleaning. Specifications • Cutting Diameter (D mm): 12.7 • Cutting Height (h mm): …

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 18mm • Shank Diameter: 16mm • Length of Cut: more→24mm • Overall Length: 72mm • Square End Helix Angle: 30°

Bahco Sandflex® Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneu more→matic tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.Size: 102 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.…

Durable in Sheet Metal - The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has more→less risk of tooth breakage and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. It is suitable for use with all corded and …

A bearing guided, tungsten carbide tipped cutter designed to produce a decorative edge when working on MDF, softwoods, hardwoods and plywood. Shank: 1/4in. Features: Produces a decorative edge TCT cut more→ting edges TCT cutting edges Bearing guided Specifications: Dimensions: H:15.0 x W:1.5 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB91

Trend Snappy 9.5mm diameter TCT countersink - with adjustable drill 9.5mm diameter countersink with pilot drill designed for screws up to 5mm Metric gauge. The perfect, fast swap accessory for clea more→n, consistent finishes." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 3mm diameter replaceable HSS (High Speed Steel) piloting drill for 5mm Metric gauge screws in softwood or 4mm gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend …

These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 8 mm • Dia Metric: 3.2 • Dia Impe more→rial: 1/8 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 59 • Radius 1 Metric: 1.6 • Radius 1 Imperial: 1/16

Trend Snappy 9.5mm diameter TCT countersink - with adjustable drill "9.5mm diameter countersink with 4mm clearance drill. The perfect, fast swap accessory for clean, consistent finishes." TCT cutt more→ing tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 4mm diameter replaceable HSS (High Speed Steel) drill for clearance holes on metric screws up to 5mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications …

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications • Cut Length Metric: 5 • Bear more→ing Dia Metric: 29 • Sawbore: 12

Lasts up to 50x longer than a BiMetal hole saw in tough materials - Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind u more→ntil their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again. Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch EXPERT Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and me…

Easy Drilling Starts - The Auto Start Pilot Drill for Diamond Holesaws provides easy drilling starts. It drills the pilot hole in tiles and guides the diamond hole saw without the use of an external c more→entring aide. The spring-mounted centring pin with a tungsten carbide tip provides the strength necessary for drilling starts in hard materials. Use this Auto Start Pilot Drill when cutting holes through tiles. It is suitable for use with all corded and cordless drill drivers. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. Features and Benefits • Easy Drilling Starts • Auto Start Pilot Drill provides easy drilling starts • Drills the pilot …

2x Longer Lifetime - The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, more→it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. Features and Benefits • Long Life • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt …

Ideally suited to plumbers and interior contractors for drilling exclusively into soft tile and soft brick. The Makita tungsten carbide grit hole saws are made with a carbon steel body and tungsten ca more→rbide tips. Features and Benefits • Ideally suited to plumbers and interior contractors • Drilling exclusively into soft tile and soft brick • Made with a carbon steel body and tungsten carbide tips Specifications • Diameter: 83mm • Length: 57mm • Pack Quantity: 1

Smooth Cutting - The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made o more→f bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics The bi-metal Hole Saw fits all standard adapters on the market. Fits threaded standard adapter. Features and Benefits • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding …

These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Dia Imper more→ial: 3/16 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 66 • Radius 1 Metric: 2.4 • Radius 1 Imperial: 3/32