Diamond Core Bits & Milling Cutters

Expert Quality, bi - metal with 8% COB alt added for extra strength. 1/4" hex shank and 10mm depth collar with integrated sprung arbor for quick waste release. Manufactured from high quality steel hel more→ping to prolong the cutting edge. For use on sheet steel, stainless steel and non ferrous metals. Display packed.

The Starrett TCT Stainless Steel Holesaws are ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than is possible with a bi-metal more→holesaw. Tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf. They have a solid one-piece construction, with complete assembly including arbor and pilot drill. A split-point drill bit allows for faster penetration and self-centring helping keep the drill on target and to prevent wandering. Fitted with ejector spring for easy core removal. Ideal for production cutting, and particularly suitable for use in drills with limited …

The LENOX Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates meta more→l with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT staircase design provides fast and easy plug ejection.This LENOX Bi-Metal Holesaw has the following specification: Diameter: 51mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK: 2L or 6L

The LENOX Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates meta more→l with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT staircase design provides fast and easy plug ejection.This LENOX Bi-Metal Holesaw has the following specification: Diameter: 48mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK: 2L, 6L

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plasti more→cs, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly more→suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Can be used for 6mm dowels. For drilling machines or routers. Specifications • Shank Diameter: 8 mm &bu more→ll; Dia Metric: 6 • Cut Length Metric: 35 • Overall Length Metric: 70

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 58

Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a more→8% cobalt content for increased heat and wear resisitance for greater product life. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Cutting Depth: 38mm Features: Variable pitch with HSS teeth Ideal for cutting wood, chipboard, plywood, plastics, plasterboard & non-ferrous metal Ideal for cutting wood, chipboard, plywood, …

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table sho more→ws angles from the horizontal and the profiles show angles from the vertical. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 61 • Angle: 104

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. S more→pecifications • Shank Diameter: 1/4 • Dia Metric: 21 • Dia Imperial: 53/64 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 60

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 5 • Dia Imperial: 13/64 • Cut Length Metric: 16 • Overall Length Metric: 71

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to more→20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

Snap-back™ Arbor. No Tools. No Adaptors. No Screwing Around. Pull Twist Snap.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting dep more→th is 41mm (15/8). Saws have 3TPI constant pitch teeth.Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 102 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length M more→etric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 68 • Bearing Dia Metric: 12.7 • Angle: 90

450mm extension for Lenox hole saw arbors. Compatible with: • Standard Arbors: 1L, 2L, 3L • Snap Back Arbors: 2L

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 59

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 69

These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imper more→ial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 65 • Radius 1 Metric: 3.2 • Radius 1 Imperial: 1/8

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications • Dia Metric: 6.3 • Dia Imperial: 1/4 • Overall Length Metric: 19 • Sawbore: 4 • Sawbore Imperial: 5/32

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table sho more→ws angles from the horizontal and the profiles show angles from the vertical. Specifications • Shank Diameter: 8 mm • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 61 • Angle: 104

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table sho more→ws angles from the horizontal and the profiles show angles from the vertical. These cutters have Solid Carbide inserts. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 • Dia Imperial: 15/64 • Cut Length Metric: 6.9 • Cut Length Imperial: 9/32 • Overall Length Metric: 57.5 • Angle: 98