Wrenches Ridgid

prices on 99 models

Ridgid

clear

Show

with photos

Ridgid K-1 Combination Auger

109.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

The Ridgid K-1 Combination Auger provides an all-in-one solution for removing blockages from urinals and shower drains. The auger's dual power operation provides additional power necessary for removin more→g tough obstructions. Its telescoping design provides additional cable length for obstructions that are further down the line. It has a 'C' cutter head that is ideal for breaking up hard blockages. The left-hand wound cable provides strength and prevents kinking. Specifications Pipe Sizes: Up to 2in (50 mm) Cable Length: 4ft (1.2 m) Cable Diameter: 3/8in (10 mm) Operation: Manual or drill powered Applications: Urinals and shower drains Cutter Head Type: C cutter

Ridgid 975 Roll Groover 33033

1,899.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

The RIDGID 975 Roll Groover acts as 2 tools in one. It can mount onto the 300 Power Drive for machine powered roll grooving but is also designed to manually roll groove in-place pipe. The 975 Combo Gr more→oover includes new, patented auto tracking technology for significantly easier grooving. Whether you're doing machine-powered or manual grooving, the Auto Tracking gauge keeps the pipe automatically engaged to the groover throughout the grooving process. The 975 also includes a permanently depth setting gauge for quicker, repeatable set-up. When manually roll grooving, the 975's 55% higher gear reduction means less hand force required versus competitive manual roll groovers. This is especially helpful …

Ridgid 258 Cutter with No.700 Powerdrive 115 Volt 17881

6,099.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

The RIDGID 258 Power Pipe Cutter cuts 2 12 - 8in (65-200mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, more→the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21ft (6m) or nipple lengths of pipe is achieved quickly, without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for bevelling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe. No Load Speed: 26-30/min. Capacity: Schedule 10/40 Steel Pipe: 2.12 …