SFP Transceivers

The TEG-MGBSX Mini-GBIC Multi Mode module works with standard Mini-GBIC slots on most switches. This Multi-Mode LC Type module spans distances up to 550m (1,800ft) and includes 1 x 1000Mbps-SX (LC-Type) Mini-GBIC connector.Features:- Mini-GBIC module for multi-mode fiber with an LC connector-type- For distances up to 550m- Designed to connect with a standard Mini-GBIC slotSpecifications:- Wavelength: 850nm- Optical Output Power (dBm): -9 ~ -3- Optical Input Power (dBm): -20 ~ -3- Power Budget: -11- Distance: 550m

The AT-SPFX offers a short-haul option to extend your network to 2km The AT-SPF series SFPs are compatible with a limited number of SFP compatible products. Call or check with your Allied Telesis sales rep for details.

New

Media Converter

The Tl-Sm311 Series Fiber Module Cards Are Introduced For Extending Transfer Distance Attached To Our Managed/Web Smart Switches. They Can Extend The Distance To Several Kilometers Even Tens Of Kilometers Which Can Basically Satisfy The Distance Requirement Of Lan. Users Can Choose Whether And Which Items To Use The Fiber Modules According To The Demand In Order To Lower Cost.

1.25 Gbps SFP Module, Singlemode, BiDi LC Simplex, Tx1310nm/Rx1550nm, up to 20km. The DIGITUS® mini GBIC (SFP) transceiver modules offer highest quality and reliability. Wether from switch to switch, converter to switch, converter to converter or any else application: The wide product range of DIGITUS® modules makes possible a flexible usage of the fiber technology. The conformity to the MSA (Multi Source Agreement) standard ensures a compatibility to third party manufacturers.Compatible with the following manuafacturers: Allied Telesis, Allnet, Avaya, CISCO, D-Link, Edimax, FINISAR, FORCE 10, Gigamon Intellinet, KTI Networks, Level One, PLANET, Tenda, TP-Link, TRENDnet, Mikrotik , ENTERASYS, R…

TP-LINK TL-SM311LM.SFP transceiver type:Fiber optic, Maximum data transfer rate:1250 Mbit/s, Interface type:SFP.Certification:FCC, CE.Input voltage:3.3 V.Specifications:-Input voltage:3.3 V.-Operating temperature range:0 -70 °C.-Relative operating humidity:10 -90%.-Storage temperature range:-40 -80 °C.-Storage relative humidity:5 -90%.-Wavelength:850 nm.-SFP transceiver type:Fiber optic.-Maximum data transfer rate:1250 Mbit/s.-Interface type:SFP.-Multi-mode fiber (MMF) compatible:Yes.-Fiber optic connector:LC (UPC).-Maximum transfer distance:550 m.-Supported cable fiber diameters:50/125,62.5/125 µm.-Certification:FCC, CE.-Connect and use (Plug and Play):Yes.

The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC220L will transmit at …

Specifications:Performance:- Sfp Transceiver Type: Fiber Optic- Maximum Data Transfer Rate: 1250 Mbit/S- Interface Type: Sfp- Multi-Mode Fiber (Mmf) Supported: Yes- Fiber Cable Diameters Supported (Core/Cladding): 50/125 µm- Maximum Transfer Distance: 300 M- Wavelength: 850 Nm- Networking Standards: Ieee 802.3ae- Power (Input Voltage): 3.3 V- Operational Conditions:- Operating Temperature (T-T): 0 - 70 °C- Storage Temperature (T-T): -40 - 85 °C

Ubiquiti Networks UF-MM-1G. SFP transceiver type: Fiber optic, Maximum data transfer rate: 1250 Mbit/s, Interface type: SFP. Number of products included: 2 pc(s)

Ubiquiti UACC-CM-RJ45-1G network transceiver module Copper 1000 Mbit/s RJ-45

Hewlett Packard Enterprise X130 10G SFP+ LC SR network transceiver module 10000 Mbit/s SFP+

Specifications:Performance:- Sfp Transceiver Type: Optical Fiber- Maximum Data Transfer Range: 1250 Mbit/S- Interface Type: Sfp- Multi-Mode Fiber (Mmf) Supported: Yes- Fiber Optic Connector: Lc- Maximum Transfer Distance: 550m- Bandwidth For Transmission (Max.): 850nm- Bandwidth For Reception (Max.): 850nmEnvironmental Conditions:- Maximum Temperature: 70°C- Operating Temperature Range: 0 - 70°C

LevelOne SFP-3211 is a high performance and cost-effective single-mode SFP transceiver. Intended for use with Gigabit Ethernet, it provides up to 1.25 Gbps bidirectional data transfer rate on a single duplex fiber core. For use with 9 micron fiber cables, it can reach a distance of up to 10km. The SFP-3211 transceiver operates using a wavelength of 1310nm with a FP Laser Diode light source and has a LC connector.Features:- 1310nm FPLD- Data Rate: 1.25Gbps, NRZ- Single +3.3V Power Supply- RoHS Compliant and Lead-free- AC/DC Differential Electrical Interface- Compliant with Multi-Source Agreement (MSA)- Duplex LC Connector- Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25Gbps- …

Highlights: • Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards • Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely • Adopts Wdm Technology Transmitting And Receiving Data On One Single Fiber     What This Product Does The Mc111cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Adopting Wdm Technology Mc111cs Takes Only One Fiber Cable To Transmit And Receive Data Which Will Save Half Cabling Cost For You. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc111cs Is Designed For Use With Single-Mode Fiber Cable Utilizing …

10/100Mbps Wdm Media Converter Mc112cs Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards. Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely Adopts Wdm Technology Transmitting And Receiving Data On One Single Fiber     What This Product Does The Mc112cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Adopting Wdm Technology Mc112cs Takes Only One Fiber Cable To Transmit And Receive Data Which Will Save Half Cabling Cost For You. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc112cs Is Designed For Use With Single-Mode Fiber Cable Utilizing …

Highlights: Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards. Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely Provides Switch Configuration Of Half-Duplex / Full-Duplex Transfer Mode For Fx Port. Extends Fiber Distance Up To 20Km     What This Product Does The Mc110cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc110cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc110cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate.…

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.Specifications:- Connector: RJ45- Data Rate: 1.25Gbps- Distance: 100m- Tested ambient temperature: 0 C +85 C

The UBIQUITI UACC-OM-SM-1G-S-2 Transceiver is a cutting-edge networking device that is highly versatile and reliable. Featuring a stylish black and silver design with accents of green and white, this transceiver is perfect for use in a range of networking environments. It is designed to efficiently transmit data across networks, making it essential for businesses that require high-speed internet and data transfer.At its core, the UBIQUITI UACC-OM-SM-1G-S-2 Transceiver is a powerful piece of networking hardware that allows for the seamless transfer of data between connected devices. It is constructed using high-quality materials, ensuring that it is robust and durable enough to withstand daily …

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Complies with IEEE 802.3ab and IEEE 802.3z standards.-Ability to set the switch for Force/Auto transfer modes for the FX port.-Increases the range of fiber optics up to 0.5km.The MC200CM is a multimedia converter designed to convert 100BASE-SX fiber to 1000Base-T cable or vice versa.Designed to IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX, the MC200CM is used with multimode optical fiber using the SC connector.The MC200CM supports shortwave (SX) laser at full wire speed transfer rate.It works at 850nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (no rack required) or with TP-LINK´s 19 system rack, Auto MDI/MDI-X for the T…

Intel Ethernet SFP+ SR Optics

Multi-mode duplex fiber transceiver module.N/AN/AThe 10 Gbps Multi-mode Optical Module is a duplex transceiver that delivers up to 10 Gbps speed over distances up to 300 meters.

TRENDnet´s hot-pluggable TEG-10GBSR, 10GBASE-SR SFP+ Multi Mode LC Module, works with a MSA compliant SFP+ slot. This Multi Mode transceiver spans distances up to 550 meters (1,804 feet), comes with a LC duplex connector, and supports up to 10.5 Gbps networking throughput speeds. Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.Specifications:- Hot-pluggable SFP+ transceiver- SFP+ MSA compliant- Supported throughput up to 10.5 Gbps- Multi Mode fiber for distances up to 550 m (1,804 feet)- 850 nm wavelength- Duplex LC connector- Digital Diagnostics Monitoring (DDM) support- Operating temperature: 0 to 70 °C (32 to…