SFP Transceivers

Lanview MO-G-SFP-1G-SX network transceiver module Fiber optic 1000 Mbit/s 850 nm

The AT-SPFX offers a short-haul option to extend your network to 2km The AT-SPF series SFPs are compatible with a limited number of SFP compatible products. Call or check with your Allied Telesis sales rep for details.

The Cisco 1000BASE-SX SFP Module is an industry-standard Small Form-Factor Pluggable (SFP) Gigabit Interface Converter that links switches and routers to the network. Featuring a robust design for enhanced reliability this SFP receiver/transmitter module plugs into a Gigabit Ethernet port or slot and is hot-swappable to maximise uptime and simplify serviceability.

Digitus Gigabit Media Converter, RJ45 / SFP

Lanview MO-C-S311X2-3CDL10 network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

Transceiver / SC Interfaces / Transmission Coverage 550 m

Digitus mini GBIC (SFP) Module, 1.25 Gbps, 0.55km

Digitus mini GBIC (SFP) Module, 1.25 Gbps, 20km

1000Base-BX WDM Bi-Directional SFP Module
- Adopts the latest standard 1000Base-BX
- Up to 2 km transmission distance in 9/125 μm SMF (Single-Mode Fiber)
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Supports Hot Swappable
 
  What This Product Does
TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link is up to 2 km in 9/125 μm SMF (Single-Mode Fiber). …

Specifications:Performance:- SFP transceiver type: Optical fiber- Maximum data transfer range: 1250 Mbit/s- Interface type: SFP- Single Mode Fiber (SMF) Compatible: Yes- Fiber optic connector: L.C.- Supported Cable Fiber Diameters: 9/125µm- Maximum transfer distance: 20000m- Wavelength: 1310nm- Digital Diagnostic Monitoring (DDM): Yes- Hot-Plug Compatibility: YesEnvironmental conditions:- Operating temperature range: 0 - 70°C

Complies with IEEE 802.3ab and IEEE 802.3z standards.-FX port with hot swapping.-Increases the range of fiber optics up to 0.55km with multimode fiber and 10km with single-mode fiber.The MC220L is a multimedia converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T cable or vice versa.Designed to IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH, the MC220L is used with multimode/singlemode optical fiber using the SC connector.The MC220L supports shortwave (SX) laser at full wire speed transfer rate.It works at 850nm both in data transfer and reception with multimode fiber and at 1310nm in both data transfer and reception with single-mode fiber.Other features of this module …

Outdoor Fiber Installations
For long-distance runs of 300+ meters use U Fiber 1G or 10G single-mode modules and BiDi models for maximum reuse of existing infrastructure. For shorter runs use U Fiber 1G or 10G multi-mode modules for reduced cost.

Fiber Modules
U Fiber modules are available as single-mode or multi-mode models to suit your fiber connectivity applications.

Fiber Cable
Use single-mode LC FiberCable to build your outdoor fiber network. Lightweight and flexible FiberCable is ideal for tower installs of our outdoor routing and switching products such as EdgePoint devices. Available in 100 200 and 300 ft lengths.

Complies with 802.3u 10/100Base-TX, 100Base-FX standards.-Ability to configure the switch for Half-Duplex / Full-Duplex transfer modes for the FX port.-Increases the range of fiber optics up to 2km.The MC100CM is a multimedia converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.Designed to IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is used with multimode fiber optics using the SC connector.The MC100CM supports shortwave (SX) laser at full wire speed transfer rate.It works at 1310nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (without the need for a rack or with TP-LINK´s 19´´ sys…

SFP Module / LC Interfaces / Transmission Coverage 10,000 m

AddOn Networks J4858D-AO network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

TP-Link TL-FC311B-2.Maximum data transfer rate:1000 Mbit/s, Network standards:IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3z, Ethernet interface type:Gigabit Ethernet.Maximum transfer distance:100 m, Supported cable fiber diameters:9/125 µm.Product color:Black.Input voltage:5 V, Input current:0.6 A.Width:94.5 mm, Depth:73 mm, Height:27 mm.Specifications:-Width:94.5 mm.-Depth:73 mm.-Height:27 mm.-Input voltage:5 V.-Input current:0.6 A.-Storage relative humidity:5 -90%.-Relative operating humidity:10 -90%.-Operating temperature range:0 -50 °C.-Storage temperature range:-40 -70 °C.-Data transfer speed:1000 Mbit/s.-Ethernet LAN, data transfer speed:10,100,1000 Mbit/s.-Network standards:IEEE 802…

What This Product DoesN/ATL-FC311A-2 is a gigabit media converter providing a gigabit RJ-45 port and a gigabit SC fiber port which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.N/AN/AHow This Product WorksN/ATL-FC311A-2 adopts WDM (wavelength division multiplexing) technology helping send and receive data at a distance of up to 2 km with only a single mode fiber which saves half of the cable deployment cost for customers. TL-FC311A-2 transmits data at 1550 nm wavelength and receives data at 1310 nm wavelength on optical fiber. Therefore …

Complies with 802.3u 10/100Base-TX, 100Base-FX standards.-Ability to configure the switch for Half-Duplex / Full-Duplex transfer modes for the FX port.-Increases the range of fiber optics up to 20 -60km.The MC110CS is a multimedia converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.Designed to IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is used with single-mode fiber optics using the SC connector.The MC110CS supports shortwave (SX) laser at a full wire speed transfer rate.It works at 1310nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (without the need for a rack or with TP-LINK´s 1…

RJ45 TO SC CONVERTER CUDY MC100GSA-20 10 100 1000M 1310nm SM 20Km SC MC100GSA-20 RJ45 TO SC CUDY CONVERTER MC100GSA-20 10 100 1000M 1310nm SM 20Km SC MC100GSA-20.

TP-Link MC111CS network media converter 100 Mbit/s Single-mode Black

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa.Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you.Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector.The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate.It works at 1310nm on transferring data and at 1550nm on receiving data.So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data.Another …

Features: - 1× 10/100/1000mbps Auto-Negotiation Rj45 Port Supports Auto-Mdi/Mdix- Auto-Negotiation Of Half-Duplex/Full-Duplex Transfer Mode- Adopts Wdm Technology, Transmitting And Receiving Data On One Single Fiber- Extends Fiber Distance Up To 20 KmWhat This Product Does:- Tl-Fc311b-20 Is A Gigabit Media Converter, Providing A Gigabit Rj-45 Port And A Gigabit Sc Fiber Port, Which Can Convert Between Electrical And Optical Signals. And Long-Distance Data Transmission Through Optical Fiber Can Be Applied To Commercial Scenarios Such As Park Security Monitoring And Wireless Networking.How This Product Works:- Tl-Fc311b-20 Adopts Wdm (Wavelength Division Multiplexing) Technology, Helping Send A…

Complies with IEEE 802.3ab and IEEE 802.3z standards.-Ability to set the switch for Force/Auto transfer modes for the FX port.-Increases the range of fiber optics up to 15km.The MC210CS is a multimedia converter designed to convert 100BASE-LX/LH fiber to 1000Base-T cable or vice versa.Designed to IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH, the MC210CS is used with single-mode optical fiber using the SC connector.The MC210CS supports shortwave (SX) laser at full wire speed transfer rate.It works at 1310nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (no rack required) or with TP-LINK´s 19´´ system rack, Auto MDI/MDI-X for…

Intellinet Transceiver Module Optical, Gigabit Ethernet SFP Mini-GBIC, 1000Base-Sx (LC) Multi-Mode Port, 550m,MSA Compliant, Equivalent to Cisco GLC-SX-MM, Three Year Warranty