Construction Adhesives

Loctite 2400 THREADLOCK ADHESIVE5ml(PK-12) V 2020

Delivery: in United Kingdom

Report

TOUPRET Exterior Masonry Repair Filler will fill without depth limit and repair without formwork. It will adhere to damp masonry and is weather-resistant. It can be used on all rough masonry surfaces more→cement, concrete, breeze blocks, bricks and stones. Overcoat 48-72 hours from application with any water-based masonry paint or mineral paint. If using polyurethane or epoxy solvent-based paints, first prime with water-based exterior paint.

62.99Buy!
£

Evo-stik 5L GP Contact Adhesive

Delivery: in United Kingdom

Report

2400 THREADLOCK ADHESIVE5ml(PK-12) V 2020 by Loctite

62.99Buy!
£

Loctite 315/7386 PCB Output Adhesive 25ml Kit

Delivery: in United Kingdom

Report

A general purpose contact adhesive with high initial grab which can be easily applied by brush or spreader. Features and Benefits Excellent bond strength Boasts excellent temperature resistance Typica more→l Applications GP contact is particularly suitable for bonding plastic laminates and other rigid plastics (excluding polyethylene and polypropylene) on particle board, MDF, woods, metals and all types of board with the exception of bituminous materials.

64.99Buy!
£

Loctite 460 Prism Cyanoacrylate Adhesive 50GM

Delivery: in United Kingdom

Report

The Loctite Output Adhesive Kit includes the 315 Output Syringe (25ml) and 7386 Activator Bottle (18ml) - a thermally conductive kit for bonding components to equipment such as heat sinks. Features an more→d Benefits Cures rapidly at room temperature. Typical applications include power transistors, processors, etc. High thermal conductivity provides excellent heat dissipation. Electrically insulating. Produces consistent 0.15mm gap. Controlled strength permits repair. Supplied as a pack containing 25ml syringe of 315 adhesive and 18ml bottle of 7386 activator.

Loctite 9514 Hysol Epoxy Adhesive - 300ml

Delivery: in United Kingdom

Report

Low bloom low odour. Medium viscosity. Ideal where cosmetic appearance is required. Improved fixture strength on metal and plastic. Also for porous substrates and acidic surfaces. Features and Benefit more→s Clean, clear bond Low bloom, low odour, low viscosity Provides a strong bond, even on porous and acidic surfaces Notes Gap fill: 0.10mm. Colour: clear. Temperature: -40 to +80C. Comment: low bloom, low odour, low viscosity.

Delivery: in United Kingdom

Report

High performance Epoxy adhesive, suitable for induction curing. Features and Benefits High shear and peel strength Excellent chemical resistance High temperature resistance up to 200 degrees C Ideal f more→or applications requiring raw strength such as filter bonding or magnet bonding Notes Requires heat cure 300ML cartridge or 1kg.

Araldite AY103 Resin 1kg

Loctite 330 Multi-bond Adhesive 3 15ml

Delivery: in United Kingdom

Report

Transparent, low viscosity adhesive suitable for bonding a variety of materials, including metal, ceramic and wood. This adhesive is easy to apply either manually by spatula and stiff brush, or mechan more→ically by metering, mixing and coating equipment. The adhesive cures at temperatures from 20C (68F) to 100C (212F).

Loctite 495 Cyanoacrylate Adhesive 50GM

Delivery: in United Kingdom

Report

Multi-bond. Two part no mix general part adhesive. Tough and impact resistant bond. Good peel strength. Bonds a wide range of substrates. NSF food approved. Features and Benefits Ideal for bonding dis more→similar substrates, like PVC, phenolic and acrylic compounds Quick fixture time Good impact resistance Technical Information Adhesive type: acrylate. Gap fill: 0.50mm. Shear/peel strength: 15 - 30N/mm. Fixture time: 10 minutes. Temperature: -40 to +120C. Notes This product requires an activator - LOCTITE SF 7388.

Loctite 416 Cyanoacrylate Adhesive 50GM

Delivery: in United Kingdom

Report

Thin, easy flowing, general purpose instant adhesive. Suitable for close fitting small components and parts bonding on rubbers, plastics and metals. It can also bond polyolefins when used in combinati more→on with Primer LOCTITE 770 or LOCTITE 7239. Features and Benefits Suitable for close fitting small components and parts bonding Perfect for bonding rubber, plastic and metal parts Fast setting

Loctite F246 Structural Adhesive 320ml

Delivery: in United Kingdom

Report

LOCTITE 416 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination wit more→h Primer LOCTITE 770 or LOCTITE 7239. Replaced by 431 Features and Benefits Suitable for metal, rubber and plastic surfaces Colourless, high viscosity sealant Fast setting

Loctite Type 543 Threadlocker Medium Strength 50ml

Delivery: in United Kingdom

Report

High strength two part no mix general part adhesive. Tough and impact resistant bond. Good peel strength. Bonds a wide range of substrates. Typical Applications Adhesive type: acrylate Gap fill: 0.50m more→m Shear/peel strength: 35N/mm Fixture time: 5 minutes Temperature: -40 to +120C Notes To be used with initiator No.5 LOC7252574D (35ml) or LOC7252575E (1ltr) Full kit available LOC7252550F

71.99Buy!
£

Loctite 493 Instant Adhesive - 50g

Delivery: in United Kingdom

Report

LOCTITE TYPE 543 THREADLOCKER MEDIUM STRENGTH 50ml

74.77Buy!
£

Everbuild General Purpose Silicon Clear 280ml - Pack (12)

Delivery: in United Kingdom

Report

Loctite 493 is a cyanoacrylate adhesive designed for rubbers, metals and capillary. Key features: Fixture time of 10 - 30 sec. Colourless. Suited for plastics. Suited for polyolefines in combination w more→ith Primer LOCTITE 770 or LOCTITE 7239. Viscosity in mPas: 3. Service temperature range from -40 C to +80 C. Available in pack sizes 50g and 500g.

75.99Buy!
£

Everbuild 904 Roof Felt Adhesive - 25L

Delivery: in United Kingdom

Report

Everbuild General Purpose Silicone Clear 280ml - PACK (12) Note: Image is for illustrative purposes only and may differ from the actual product.

Easy Joint EASYJoint PRO 17kg Heavy Duty Paving & Tile Joint Compound BASA

Delivery: in United Kingdom

Report

Black Jack Roof Felt Adhesive is a cold applied, black oxidised bitumen based adhesive used to bond roofing felt to itself, concrete, asphalt, metal, wood and similar surfaces. Also suitable for use a more→s a cold gritting solution.

Loctite 5615 2K Silicon Sealant 400ml

Delivery: in United Kingdom

Report

EASYJoint PRO 17kg Heavy Duty Paving & Tile Joint Compound BASALT Note: Image is for illustrative purposes only and may differ from the actual product.

Gorilla Epoxy Glue 25ml - Pack (10)

Delivery: in United Kingdom

Report

Two part, fast cure elastic silicone sealant with excellent bond strength to glass, metals,ceramics and most plastics & elastomers. Features and Benefits It has excellent hot strength up to 180 C with more→the capability to resist higher temperatures for short-term exposure Suitable mix ratio 2:1 Typical Applications Sealing/bonding glass stove top assemblies, weld and rivet reduction in high temperature applications, and other high temperature bonding applications Technical Information 2K alcoxy silicone Elongation at break: 150% Hardness shore A: 30 Shear strength (GBMS) N/mm: 1,2 Service temperature range: +180 C

Loctite Type 641 Bearing Fit Med Strength

Delivery: in United Kingdom

Report

Gorilla Epoxy Glue 25ml - PACK (10) Note: Image is for illustrative purposes only and may differ from the actual product.

Loctite Type 542 Thread Sealant 50ml

Delivery: in United Kingdom

Report

LOCTITE TYPE 641 BEARING FIT MED STRENGTH

81.99Buy!
£

Evo-stik 528 Instant Contact Adhesive 2.5 Litre

Delivery: in United Kingdom

Report

LOCTITE TYPE 542 THREAD SEALANT 50ml

82.99Buy!
£

Araldite 2014-2 Epoxy Resin 200ml

Delivery: in United Kingdom

Report

528 INSTANT CONTACT ADHESIVE 2.5 LITRE

83.99Buy!
£

Loctite 9497 A&b Epoxy Adhesive - 400ml

Delivery: in United Kingdom

Report

Gap filling properties. Non-sagging up to 5mm thickness. Low out gassing/ volatile loss. Temperature resistant to 120C. Ideal for metals, electronic components, GRP structures etc. Light handling stre more→ngth at 3 1/2 hours. Resistance properties Chemical - Excellent. Heat - Excellent. Water - Excellent. Very resistant to water and chemicals. Size: 50ml, 200ml and 2.00kg.

84.99Buy!
£

Loctite 9466 A&b Epoxy Adhesive - 400ml

Delivery: in United Kingdom

Report

2-part, grey epoxy adhesive for structural bonding that offers high technical performance. Features and Benefits Provides a high temperature resistance - up to +180C for heat resistant bonding and fil more→ling It is thermally conductive and delivers high compression strength Ideal for bonding metal components Notes Adhesive type: epoxy. Gap fill: 0.50mm. Shear/peel strength: 20N/mm. Fixture time: 780 minutes. Temperature: -55 to +180C.

89.99Buy!
£