Car Service Station Equipment Powertec

The easy to use Wrap Block from Power-Tec is for use with 150mm sanding discs and is ideal for sanding contoured bodywork and ridges. Simple yet effective, this makes an ideal addition to the tool kit of anyone who repairs automotive bodywork.

This specialist tool bolts onto the hub flange and repairs wheel arch collision damage. Easy to use, this clever tool produces a high quality repair that prevents tyre rub and further damage to the arch. Can also be used a wheel arch flaring tool.

Ideal for use in hard to pull areas, the tight opening clamp from Power-Tec features a 38mm wide jaw and has a maximum pulling capacity of 3 tons, making it perfect for pulling applications involving areas such as chassis ends, supports and light openings.

For the preparation of bodywork panels in need of repair, this easy to use, professional grade removal tool is ideal for workshops, garages and bodyshops. Complete with three wire brushes, stripping wheel and eraser and featuring 180 degree head movement for left or right handed operation, this tool removes the need for sandblasting and removes paint, stripes, under seal and rust with ease. Easy to use and featuring an in-built central vacuum, this tool even cleans up after you too, great value!

This useful rubber eraser wheel with 6mm shank simply connects to drills to be used as a high power, high performance sticker, adhesive, decal and strip remover.

Part of a range of air compressor accessories.59mm in length.Air Regulator.For use with Power-TEC Spray Gun range.

Ideal for repairing dents in wheel arches on smaller vehicles, this small arch hook simply hooks under the wheel arch, allowing for pulls without the risk of bulging or mis-shaping the wheel arch. Featuring two different pulling faces, offering a choice or curvature to fit most wheel arches. With it's 1.5 ton pulling capacity, this hook is also useful for radiator supports, tail light openings or any lightweight panel pulling tasks.

A must have for use during vehicle repair work, this adjustable restraint is for use across vehicle bonnet and boot openings and is designed to restrict potential distortion to such openings while repair work is being carried out.

Simple to use, this pulling yoke is ideal for use with pulling straps or chains and is great for various automotive bodywork pulling applications. Simply slip the pin into the back of the clamp and set up the pull. Can be used with a pulling clamp or on its own.

This easy to use 'Polly Trolley' from Power-Tec is manufactured for the easy storing and dispensing of polythene sheeting used in the workshop. It can be easily transported around the workshop thanks to the large rugged wheels and then protective sheeting can be pulled over the vehicle and cut to size to offer protection from potentially damaging dust and dirt.

Manufactured from Aluminium constructed with pocket clip and Euro adaptor. Maximum Inlet Pressure 150psi (10BAR). Maximum Outlet Pressure 90psi (6.2 BAR). Operation Temperature -20C to +80C. Maximum Input Air Flow 450L/M @ 10 BAR.

A 45mm deep Pinza Clamp from Power-tec with a 50mm wide jaw, allowing the clamp to be used over flanges and deep onto the panel for a sure, non slip grip. Boasting 6 ton in-line capacity and 2 ton right angle capacity.

An ideal tool for drying water based paints, this easy to use and easy to fit blow gun comes complete with a replaceable/cleanable filter to prevent airborne particles contaminating the paint. Great for spot repair on a wide range of body panels. A must have tool for spray booths since the solvent based paint ban was placed.

This handy multi hole pull plate from Power-Tec is suitable for a range of dent pulling applications in the automotive repair industry. Simple to use, the plate can be bolted onto a chassis or bodywork panel to allow for a quick, simple repair.

Perfect for pulling at any angle, this Power-Tec multi clamp is ideal for applications all around the vehicle. With a 120mm wide jaw and supplied with a Vario Clamp & Pull Set and a Rota Arm.

Replacement brush for Power-TEC Mule Skinner - Part No.91988.Mule Skinner Encapsulated Brush.Also available as a pack of 3 - Part Number 91986.Replacement Brush for Power-TEC Mule Skinner 3pc and Arbor (Part Number 91988).Consumable item.Part of the Panel Repair Range.

Ideal for use in workshops where there is limited space for regular 2 and 4 post vehicle lifts, the Mobi-Lift MKII is a fully portable and very capable vehicle lift, powerful enough to lift up to 1200kg and support light commercial vehicles, 4x4's, pick up's and almost any other vehicle weighing up to 2500kg. Lifting from either the wheel or the sill, the Mobi-Lift MKII quickly raises vehicles to a good working height, making the job easier and safer. Perfect for estimating, wheel changing, jet washing and paint spraying, the Mobi-Lift MKII from Power-Tec is a must have for any automotive workshop.

Ideal for repairing dents in wheel arches on larger vehicles, this large arch hook simply hooks under the wheel arch, allowing for pulls without the risk of bulging or mis-shaping the wheel arch. Featuring two different pulling faces, offering a choice or curvature to fit most wheel arches. With it's 1.5 ton pulling capacity, this hook is also useful for radiator supports, tail light openings or any lightweight panel pulling tasks.

This Power-Tec J Hook is ideal for quick pulls, when time is not on your side. Unlike other pull clamps that need to be screwed or bolted onto an object, this item simply hooks onto the work piece, for quick, easy pulls with minimum effort required from the user.

An important piece of equipment for automotive bodywork repairs, this single sided half round body file is used to smooth down rough areas in bodywork during repair. Allowing for the application of filler where needed, or paint.

A set of four elasticated wheel covers, manufactured to fit over 13", 14" and 15" tyres to protect them while paint spraying work is carried out.

A flexible sanding file that can be used for concave, convex and flat sanding. With 14 holes and dust extractor connection point for easy dust removal in operation.

Simple to use and suitable for use on a wide range of vehicles, this extending rear hatch support is used to support the rear hatch and hold it at a suitable angle/height while it is being painted or repaired. Featuring able to extend from 720mm to 1840mm, this simple, yet useful device can be used on hatchbacks, estates, saloons and even some SUV's.

This Duck Bill Clamp from Power-Tec is ideal for use in hard to reach areas where regular sized clamps are not able to fit. With a 30mm wide jaw, 65mm reach and 3 Ton capacity, this clamp may be slim, but it is just as capable as other clamps.