Amplifiers

80 Watts Per Channel at 4 Ohms
JENO Engine (Jitter Elimination and Noise-shaping Optimization)
LAPC (Load Adaptive Phase Calibration)
Low-noise PHONO Input
Includes free Technics EAH-AZ70 headphones in black worth 240 (not for use with the SU-GX70)

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

PORTABLE YET POWERFUL: DAC3 is a pocket-sized digital-to-analog converter (DAC) and headphone amplifier that’s the perfect upgrade for your on-the-go listening. Connect DAC3 directly to your phone, tablet or computer via USB-C and drive high resolution audio to your headphones (or speakers) and reveal stunning detail and music clarity you’ll notice immediately.
PREMIUM PERFORMANCE: DAC3 uses a high-performance headphone amplifier, which easily drives headphones with impedances of 12 ohms or higher. The ES9281A PRO Ultra DAC delivers 32-bit precision, high dynamic range and ultra low distortion with the capacity to support even the most demanding headphones.
HIGH-RESOLUTION AUDIO: With broa…

From the functional "dogbone" handle to the chrome control plate and mini "chicken head" knobs, the Fender MD20 Mini Deluxe replicates the classic look of the full-size Deluxe amp for the traveling player. Plug in and tap into pure Fender tone at a fraction of the size, wherever your next destination may be.
Power (Watt): 1.0
Power Supply: Adapter
Power: 1 W
USB: No
DI Output: No
Headphone Output: Yes
Battery Operation: Yes
Made in: China

Now continuing the tradition of innovation and excellence, Peavey launches the VYPYR X modeling amplifier. This latest evolution of the groundbreaking VYPYR series features updated styling, superior cabinet design for premier acoustic performance, and improved TransTube technology. The new VYPYR X3 also features Bluetooth remote control and audio streaming in. Now users can stream backing tracks into the amplifier and control all settings via iOS remote app control.Each VYPYR X is equipped with Peavey's exclusive TransTube technology. This true analog distortion not only sounds better, it leaves the amplifier's processing power dedicated to the effects, allowing the VYPYR X to run up to 5 effects …

PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card…

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Made in: Germany
Type: DI Box
Power Supply: 48V Phantom
UK/EU Power supply included: No
Battery Operation: Yes

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China

Microphone preamplifier Golden Age Project PRE-73 Jr MKIINo integrated circuits are used in the signal pathMax. microphone gain 70 dBSwitchable High-Pass Filter (off/approx. 40 Hz/approx. 170 Hz)2-stage switchable Air EQ (3 or 6 dB gain at 30 kHz)Phantom power supply: + 48 VSwitchable phaseMicrophone input: XLR/jack 6.3 mm comboHi-Z input for guitar/bass: 6.3 mm jackLine output: XLR/jack 6.3 mm comboDesign: desktop formatIncluding external power supplyColor: Red
Type: DI Box;Preamp
Outputs: Jack 6,3 mm TS;XLR
Package Contents: Adapter
Power Supply: Adapter
Gain: 70 dB
Made in: China
Inputs: Jack 6,3 mm TS;Kombi XLR/TRS
Controls: Gain;Hi-Pass Filter;Output;Phantom
Number of Channels: 1
Headphone …